How to connect and use a servo tester and servo motor - Servo Tester Kit (a.k.a. Simple Robot Kit)
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- Learn how to use your servo tester kit (a.k.a simple robot kit). Purchase full Servo tester kit: www.amazon.com...
Individual Parts:
- 1 x 6V battery holder (www.amazon.com...)
- 1 x 180 Degree Servo Motor (shop.barnabasr...)
- 1 x Servo Tester (shop.barnabasr...)
Is it possible to connect 2 more servos to the tester?
Hi! Yes you can! There are two more rows under the servo motor connector shown in the video. You can connect an additional servo to each row in the same way.
What is that device called in which you inserted four batteries?
@@shaibaazmd8263 battery holder 4 way
@@BarnabasRobotics52 thank you!
My servo tester doesn't connect properly, the lights just blink, do you have any idea how to solve it?
Hello! One thing to check is to make sure that the batteries are not drained. If the batteries are not fresh, blinking is a common problem.
@@BarnabasRobotics52I checked, and they are all new, they only fail when connected to the servo
Had this happen just now. Without servo connected the tester was fine, but after connecting servo all 3 lights are on and blinking and servo is jerking. Tried to connect to a different power supply and it fixed it, it seems.
@@SerGreeny
I already solved it, it really was a power supply, it wasn't enough
@@leodopastel8451thanks for the update! Yes, if the batteries aren’t outputting enough current to control the servo, it will cause the controller to malfunction. Good job troubleshooting! 😊
Does the “S” input pin need to be connected to 5V power or is it disconnected?
Hi! On the input side the “S” pin is disconnected