@ it doubles as an FCU and trigger board. So for example the Wolverine spartan trigger board is like that. To switch between burst modes and fire rate etc, it’s all trigger commands. Same with like a Perun v2 hybrid for aegs. Was wondering if it has settings to change like that via the trigger board
Good Reg makes a big differnce in performance, a lot of cheap one are very inconsistent, also fill the tanks in a good compressor, manual pumps are very bad and had one that was leaking oil/water inside a tank, reduces performance and damages engines so many additional things, but good video overall, Congratz
@@MottuFPS hmm I don’t have a one stop shop recommendation cause it comes down to externals that you’d like to keep. Cause you’ll be gutting the inside of the gun haha. Really you wanna look for a full metal gearbox, version 2 ofc, and a full metal upper and lower just cause it’s higher quality than polymer for m4s. Stay away from krytac and aps if you’re wanting to hpa, as well as f1 aegs. Those have odd compatibility issues from what I’ve heard and you’d require some mods. Tbh any away converting to an HPA will require some modding so choose something you like and has solid construction that you can keep, meanwhile gutting out the inside.
@@danielarturodebernardogome832 if the switch that’s on the black leaf board on the front is covered up it’s in safe, then uncovered is semi, back switch uncovered is full auto. I believe this is correct. It’s some combination of the two switches toggled and untoggled.
@@supaairsoft I bought the inferno gen 2 with black leaf trigger board. It wont fire unless there is a “safety” button pushed, wich only gets pushed with the gearbox closed. And as for the selector switch, there is only semi and auto, no safe option. Perhaps you could do a video on how to set it up correctly but I think thats just how the black leaf works…
@ the safety yes only gets pushed with the gearbox closed. It starts off in safe, then moves on into select fire modes. As far as I’m aware there isn’t a model that doesn’t have safety on it. If you watch my AEG to HPA conversion video I showcase the black leaf installation briefly. Maybe that can help.
@supaairsoft yeah that's why i chucked in the basically but yeah i got told off a tech who runs one of the gel ball shops over here to get a t238 fcu for my polarstar F2, pretty sure he runs the gorilla fcu with his wolverine set-up but was like save yourself a few dollars and go the t238 route cause they are basically the same thing, still haven't tried it out yet and want to pull the F2 out of my aps noveske and replace with the spare polarstar jack i got and i brought a black retroarms receiver ar15 and the f2 is going in that with the T238 trigger board and the T238 238 fcu and some red receiver furniture and a black and red strike industries pit viper stock to match the black and red build and can't wait for the video someone else mentioned that's they are surprised that you don't have more content out considering your bloody awesome style and quality of editing but you are just getting going i guess anyways keep up the quality work and catch you on the next one
Also, dont forget to enter in for the 1000 subs giveaway that ends soon! gleam.io/YhgMh/1000-subscriber-giveaway
Thanks for the video, nozzle alignment video needed ❤
@@StantonLuke yessir 🫡 will do!
@ my alignment issue is it two close to the top.. which I think is ok ish.. it shoots 1.14J on 90psi
@@StantonLuke Thats pretty good! Yea thats a relatively easy fix with alignment. Ill be sure to try to make a video covering it one of these days!
yo actually we're releasing a new FCU with an OLED screen and a joystick
With an OLED screen! Now that sounds super cool! I’d love to review it on the channel, I’m sure my viewers would be interested 🔥
proof
Get the gate titan II for hpa you can tune trigger from your phone @supaairsoft
Send him one for a testing video please
Gorilla for the win, use it in my 2 hpa, it's mad!
their trigger boards are also insane!
@@Brav01_Designs see I gotta get my hands on one man! Which trigger board do you recommend from them?
got one for my article 1 and I love it
the titan II is a very good trigger board that doubles as an fcu so all you need is a battery everything else is mobile very useful.
@@VigorousVolt Are the different settings change through trigger commands?
@ i don’t think i quite understand what you mean
@ it doubles as an FCU and trigger board. So for example the Wolverine spartan trigger board is like that. To switch between burst modes and fire rate etc, it’s all trigger commands. Same with like a Perun v2 hybrid for aegs. Was wondering if it has settings to change like that via the trigger board
@@supaairsoft yea in the app you can change to everything. even semi ramping which comes from paintball.
@ OHHH it has Bluetooth!! That’s sick
Am Video of Nozzle Alignment would be acutally very nice:)
@@timb.4617 should be coming out this week!
hi could you make the nozzle alignment video please
@@esta511 sure thing! I’ll put it down on my list of videos to make for y’all!
@@supaairsoft thanks i really appreciate it
Good Reg makes a big differnce in performance, a lot of cheap one are very inconsistent, also fill the tanks in a good compressor, manual pumps are very bad and had one that was leaking oil/water inside a tank, reduces performance and damages engines
so many additional things, but good video overall, Congratz
@@Brav01_Designs that’s a very helpful one! A good reg goes a long way!
I run the redline reg its amazing with a ninja SLP tank.
Good fcu is titan 2 I use one with a jack and it makes it night and day
Ooh that sounds like a good option, ill have to take a look into it!
True, I have the Titan 2 and pulsar D combo (nice and easy to tune)
Cool video bro, Do you have any recommendations for a solid base gun to eventually hpa? I want to get an m4 but not sure what would be a good option
@@MottuFPS hmm I don’t have a one stop shop recommendation cause it comes down to externals that you’d like to keep. Cause you’ll be gutting the inside of the gun haha. Really you wanna look for a full metal gearbox, version 2 ofc, and a full metal upper and lower just cause it’s higher quality than polymer for m4s. Stay away from krytac and aps if you’re wanting to hpa, as well as f1 aegs. Those have odd compatibility issues from what I’ve heard and you’d require some mods. Tbh any away converting to an HPA will require some modding so choose something you like and has solid construction that you can keep, meanwhile gutting out the inside.
Ok thanks for the info ☺️
yo nice vid
Thanks man!
woah im early danggg, HI SUPA!!
@@LuciTheWendigo what’s good! Welcome to the party!
I have the black leaf but there is no SAFE option… also, I have to place some foam in the gearbox for it to shoot, how did you mànage to solve this?
@@danielarturodebernardogome832 if the switch that’s on the black leaf board on the front is covered up it’s in safe, then uncovered is semi, back switch uncovered is full auto. I believe this is correct. It’s some combination of the two switches toggled and untoggled.
@@danielarturodebernardogome832 as for the foam, what’s this for?
@@supaairsoft I bought the inferno gen 2 with black leaf trigger board. It wont fire unless there is a “safety” button pushed, wich only gets pushed with the gearbox closed. And as for the selector switch, there is only semi and auto, no safe option. Perhaps you could do a video on how to set it up correctly but I think thats just how the black leaf works…
@ the safety yes only gets pushed with the gearbox closed. It starts off in safe, then moves on into select fire modes. As far as I’m aware there isn’t a model that doesn’t have safety on it. If you watch my AEG to HPA conversion video I showcase the black leaf installation briefly. Maybe that can help.
Yes just watched it! What I am referring to is the blue thing next to trigger at minute 11:54!
What skeletonized m4 receiver is this?
@@JayyHern Lancer tactical one from Airsoft megastore
T238 fcu is basically exactly the same as the gorilla fcu just a shit load cheaper
@@drewmurray6480 I wouldn’t say exactly the same, but it is similar! I have a review video coming out in a few days!
@supaairsoft yeah that's why i chucked in the basically but yeah i got told off a tech who runs one of the gel ball shops over here to get a t238 fcu for my polarstar F2, pretty sure he runs the gorilla fcu with his wolverine set-up but was like save yourself a few dollars and go the t238 route cause they are basically the same thing, still haven't tried it out yet and want to pull the F2 out of my aps noveske and replace with the spare polarstar jack i got and i brought a black retroarms receiver ar15 and the f2 is going in that with the T238 trigger board and the T238 238 fcu and some red receiver furniture and a black and red strike industries pit viper stock to match the black and red build and can't wait for the video someone else mentioned that's they are surprised that you don't have more content out considering your bloody awesome style and quality of editing but you are just getting going i guess anyways keep up the quality work and catch you on the next one
@ Thanks a ton man! I’m trying my best hahaha
want the black leaf but its out of stock
Its in stock here: www.airsoftjunkiez.com/blackleaf-airsoft-speed-board-polarstar-redline-gen-2/
Time stamps brother 🙏😘
Always got em!
yoo supaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Yoooooooooooooooooooooooooooooooooooooooooooo