วีดีโอ

1. Please note that at 1 minute and 40 seconds in this video, we installed a base plate, which is not configured for all molds. This base plate is only available for those with shallow molding depth mold. We have labeled the molds with numbers, the same set of molds has the same number. At the same time, please note that after disassembling the mold, it should be placed together as a complete set to avoid confusion. 2. When installing the forming mold, the machine must be moved to the highest position, so that when installing the upper mold and the upper mold pressing plate, it will not cause excessive pressure 3. Sometimes abnormal noises during machine running are caused by excessive pressure.

afternoon sir, can i get your contacts.

In this video, the machine is common configuration. And our high configuration products are Omron or Siemens touch screen and PLC.It will be more convenient to change the mold and debug

The beginning of the video is to measure the value of traction. If your machine is mechanically travel, you need to take this step after changing the mold; If it is servo traction, you only need to write the value of traction to PLC through the touch screen.

According to the samples provided by customers, we made the plan and produced the machine for the first time. It is found that the bottom of the formed blister is relatively soft, but the depth of the product is not deep. After analysis, the reason is that although the depth is not deep, compared with the smaller diameter of the sample, the depth ratio has been deeper. In order to achieve the hardness bottom required by the customer, we redesigned and made secondary molding for the machine, and the effect was much better.

Which type of Air Freshener making 9818032040