- 3
- 140 051
Anthony Black
United States
เข้าร่วมเมื่อ 22 ก.ค. 2013
A channel of D.I.Y.’s, traveling, fishing, and maybe a few other sneak peaks here and there.
Easy DIY Herb Box CHEAP
I set out to build an easy, relatively cheap herb box to try and better the big box store prices. Follow me through this simple build that anyone can do in their backyard with minimal hand tools.
These dimensions are just what I decided to do. You can adjust heights or dimensions as needed to suit your need. The assembly will be the same regardless.
❤️ Please like and subscribe for more DIY tips and tricks to come!
------------------------------
Materials List:
Legs:
2 x 4 into 3' sections (x8)
Sides:
1 x 6 into 3' sections (x6)(long side)
1 x 6 into 1.5' sections (x6)(short sides)
Bottom Support
1 x 2 into 30.5 inch sections (x2)
1 x 2 into 14.25 inch sections (x2)
Inside Bottom
1 x 6 into 16.5 inch sections (x6)
1 x 2 into 16.5 inch sections (x2)
Top Trim
1 x 4 into 40.5 inch sections w/ 45-degree corners (x2)
1 x 4 into 21.25 inch sections w/ 45-degree corners (x2)
------------------------------
🎵 Track Info:
Endless Summer by extenz soundcloud.com/extenz
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/2REdANn
Music promoted by Audio Library th-cam.com/video/dH8sbGnmfZo/w-d-xo.html
🎧 Available on:
SoundCloud: soundcloud.com/extenz/endless...
---
These dimensions are just what I decided to do. You can adjust heights or dimensions as needed to suit your need. The assembly will be the same regardless.
❤️ Please like and subscribe for more DIY tips and tricks to come!
------------------------------
Materials List:
Legs:
2 x 4 into 3' sections (x8)
Sides:
1 x 6 into 3' sections (x6)(long side)
1 x 6 into 1.5' sections (x6)(short sides)
Bottom Support
1 x 2 into 30.5 inch sections (x2)
1 x 2 into 14.25 inch sections (x2)
Inside Bottom
1 x 6 into 16.5 inch sections (x6)
1 x 2 into 16.5 inch sections (x2)
Top Trim
1 x 4 into 40.5 inch sections w/ 45-degree corners (x2)
1 x 4 into 21.25 inch sections w/ 45-degree corners (x2)
------------------------------
🎵 Track Info:
Endless Summer by extenz soundcloud.com/extenz
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/2REdANn
Music promoted by Audio Library th-cam.com/video/dH8sbGnmfZo/w-d-xo.html
🎧 Available on:
SoundCloud: soundcloud.com/extenz/endless...
---
มุมมอง: 106
วีดีโอ
Garmin ECHOMAP Plus 94sv Unboxing & Installation (How To)
มุมมอง 140K4 ปีที่แล้ว
I picked up a new Garmin ECHOMAP Plus 94sv with a GT51M-TM transducer to replace my old GPSMAP unit. In this video I walk through an unboxing/install of the entire system, and overcoming a few complications experienced during the process. Materials used in this video: buy.garmin.com/en-US/US/p/592794 www.boatoutfitters.com/material/plastic-sheet/king-starboard
USMC Aerial Refueling
มุมมอง 25811 ปีที่แล้ว
KC-130J with VMGR-152 out of MCAS Futenma doing aerial refueling in the pacific. Photo and video taken 100% with an iPhone so please forgive the quality.
Great video. About to install this on my skiff
great informational video thank you
By far the best video I have seen on this subject man so freaking helpful thank you thank you thank you
Can you just get power through an NMEA connection?
Wouldcit matter if has g3 navs and im only using inshore?
There's one thing I didn't see - two old bracket holes filled in before installing the new transducer bracket. Any hole or damage to a boat hull can be filled in to be just as strong as the hull by using an epoxy putty product "marine-tek". it's sold at most marine stores. West Marine sells it under their own brand "West-Tek". It allowed me to completely refit my Mako 211. With a little paint, you'll never know the old holes were there. Ream out the hole to get down to new material, get an epoxy syringe - also from West Marine, mix the putty and load the syringe - new hull, no water intrusion.
thats "marine-tex" not "tek"
You do great work wanna install mine lol
New boat owner here! this was a great video and it helped me understand how to install the Garmin.
I like using transom savers for the issue you had with the transducer. That way it doesn’t matter if holes don’t align.
An excellent option
Awesome video!
If you promise to never use any more background 'music', I'll subscribe!
this is a great and helpful video thanks so much
You should’ve left the pull string in the tube for future endeavors. Always leave the string
Why not have your buddy pre cut the starboard. Also we use acrylic in the industry
On the power cable it’s total of 4 cables, negative and positive BUT it’s two more cable, anybody know where those 2 extra cables will be Connect it ?
The blue and brown wires are the NMEA 0183 in/out leads. They are used to connect Garmin to other NMEA devices such as your marine VHF radio. th-cam.com/video/4wuh5ux7jZs/w-d-xo.html
This was very helpful.
What if the power Source is further than the 6 foot cable? Is there a longer one?
Not in the box. If you need longer power leads than I would look at garmin. I’m sure they have extended wires.
Nice clean install. I might be installing this same unit in my Pathfinder 2200v tomorrow on NASP. First time messing around with one. Bit anything will be better than the Lowrance originally installed on the boat in 2000. I keep my boat at the marina by the front gate.
Hi. What did you use to plug up the screw holes from the old transducer?
*Looks good even in daylight **enjoyable.fishing** recommend it was exactly what it was described to be , works awesome , overall happy with product*
Great instructional video. It's nice when someone includes all the details 👍👍
Thanks
Thank you for the string idea. I was having a lot of anxiety before that. It made life so easy running the wire for my 74SV.
Transducer on a paddle boat...just make it flush with bottom of boat? Or above a hair on the bottom of boat
I would make it just about flush with the bottom of the hull. The only reason you lower it on a motorized boat is to get the transducer below the turbulent water coming off the boat.
@@anthonyblack7990 bottom of hull? Does that mean flush of the bottom.lol
Yes. A paddle boat won’t go fast enough or make enough turbulence to matter
Ty for the reply. .most people.dont
Last question on the 73sv echomap. White cover lid come with it ? Have to buy separately
capacity of deep sea
What's the gasket that you glued I didnt get that with mine
It was a weather strip included in the box.
Hi Anthony nice content,and I'm sure you already catch alot of fish with your garmin 94sv..... I just wanto know how far are your transducer in the water
How far beneath the water isn’t as important as to where on the hill of the boat it’s mounted. With that, you should try to mount it as low as possible on the hull, while also avoiding anything that’s going to crest water turbulence when underway
Good job, homie
Do you fly with the blues?
I actually did! Such an honor to have such a great senator watching my videos. Thank you!
I didnt see you fill 2 of the old holes. What did you use for them?
I did forget in the video! I actually went back and filled them after I realized it. Good catch!
@@anthonyblack7990 What did you use? Getting ready to do mine and might run into the same issue.
I just use any marine sealant. 3m or west marine brand works fine.
can someone tell me if it's possible to instal a chinese language or it's not watching?
I like your video. I watching you
I'm thinking of getting this unit for my 21' CC. I currently don't have a GPS. I use a sextant to calculate the azimuth of the Sun to find my position on a chart. I use a compass for my heading. Then again, I was a quartermaster in the U.S. Navy. Dead reckoning, a compass, and a sextant are like peanut butter and jelly with chocolate milk. Yes, I'm am a real navigator. My thing is, people rely on electronics way too much. Keep in mind we're all one solar storm away from fried electronics - world wide - and that includes satellites. It's not a question of if that will happen - but when.
I just bought the same but the 7 inch size. My boat is much smaller than yours lol. I hope to install it later today
Nice vid. I just purchased a garmin gpsmap 1042xvs for my BW 190 Outrage. So the transducer does not cut out at any speed? I had that problem with the old transducer.
Readings at higher speeds will almost always be interfered with at some point due to disturbances in the water. But I have experienced accurate reads up to about 35 mph continuously based off bottom knowledge.
Are you a marine?
I'm in Pensacola also! How has that turned out for you?
The garmin is great! Pensacola fishing is just as good
Oh ya. I love the fishing. Been here 13 years
When connecting the power we only use the red and black cables, the blue and brown are not needed Al conectar el power solo usamos los cables rojo y negro el azul y carmelita no se necesitan
can i put tranducer on aluminium transom ..
Yes you can just the same. Just ensure you’re sealing it properly, and pay attention to any possible corrosion in the future on the metal.
Thanks for the video. I am Intending to replace my Garmin tomorrow. After watching your detailed video, I'm feeling much more confident about what I will be doing.
Good luck! Hopefully it goes smoothly for you.
Excellent diy video Anthony.
Nice work!
Great Video...Very informative and useful ...Just One Question ..... Does that unit calculate Mach speed ?
Hi Anthony I just bought a garmin echomap 74sv uhd first garmin how do you like it since the video install
I love it! I recommend it to all my friends.
Thanks, helpful vid. How did you incorporate the GPS antenna?
I did not use any antenna. The unit has a built in receiver.
Great video.. just wish you had shown a little more on using it on the boat. thanks
I had to familiarize myself with it first haha. Still learning new things every trip out. Thanks for the view
Great video! I have the same setup that I am putting in a Robalo R230. Removing an old 4212 Garmin.
Good luck! Hope this helped.
Gaskets are for the inside of the cover? That is what I have done with them but don’t flush mount so maybe not.
dont forget to seal up the other two holes from the old mount
Yes they got filled after the fact. Got carried away with filming haha.
Awesome video, very clear and informative. Keep them coming