วีดีโอ

@@markmadolora143 2mm white/pink brakes front then 1mm white/pink rear. :)

@@MITZ-cx4je yeah hehe :) need to breakin another new mach dash motor. The one im using is just giving me 28k rpm. I can see other racers they can go up to 30krpm

@@soulwindgaming3599 although mahirap kasi alisin kapag may kalawang na yung mga connectors. Pwde mo itry tong mga methods na to pero if di kaya buy ka nlng ng bagong motor 1. Spray Lubricating oil 2. Clean using lighter fluid, babad mo sa jar then paandarin mo ung motor using ung battery case na may aligator clip

@@devourment89 hi sir, ill try to borrow some ringless rollers since I dont have those 3 sizes right now but based on my experience 13mm rollers (the one in using right now) - fast on straight and good for those tracks with a lot of jumps/slope 19mm - very fast of corners but sometimes get stuck on the edge of track if landing is bad from a jump 17mm - in between the pros of 13mm and 19mm. Good in straight, corners and stablility.

Kaya other racers they have 2 cars with the same setup except for the rollers. One with 13mm and the other is 19mm. Depends sa layout ng track so they wont have a hard time resetting the setup of their cars

@@devourment89 I’ll try to look for someone na may gnung setup ksi wala mashado races ng speedtech nowadays. More on boxstock, prostock, bmax, open class, gtmax, tuned class, advance stock

Hi sir you can message me in facebook "DEE Mini 4WD ph" for the price :)

@@r_v_p_j sa likod sir “anti -sabit” para if di maganda ung bagsak ng oto mo from a jump magsslide lng sya pabalik ng track and hindi sasabit ko masstuck sa edge ng track

salamat sir! more power sa channel

@@jdvz yup, so far hindi pa natatanggal hehe kahit na eembang basta mahigpit lng ung kabit

@@DEEMini4WDPH thanks! Try ko to nagamit ako nung pula kasi. Mas tipid to.

@@AJRacingChannel yes, and super happy din mga kids sa event. Hopefully sir magkaroon din jan sa cebu. :)

@@armedeuz981 thank you :) appreciate it

@@soulwindgaming3599 message lng kyo sir sa fb page ko for the price :)

@@gudoyyt10 para lang po sa LED na nilagay sa brake stay :) ngtry lang maglagay ng ilaw sa likod

​​@@DEEMini4WDPHGanda ng build kuys parang open class pormahan...

@@gudoyyt10 yes sir ganda ng build na to ska ang bilis

@@xHANIELx yes sir. Same chassis naman sila kaya fit parin

@@DEEMini4WDPH salamat po sir.. ipon muna dun ako pangsetup hehe

@@xHANIELx you’re welcome sir. Yes dont rush onti onti lng sa pag build :)

@@tkegger21 ohhhhhh thank you sir for the input :) let me try that one, I still have one extra stablizer here

@@soulwindgaming3599 wala sir eh. Physical store lang po :)

@@soulwindgaming3599 pm nyo lang ako sir sa facebook for the price (DEE Mini 4wd ph)

@@DEEMini4WDPH nag PM na po ako

@@soulwindgaming3599 para po mas stable sa track especially kapag gumagamit na ng fast motors

@@soulwindgaming3599 hi sir meron po tyo video ng dcr02 :) th-cam.com/video/6sSU-UULJUc/w-d-xo.htmlsi=Z-xl8ivl-X-5IOsP

Same placement sila ng cowl kaya kahit ano sa dalawang setup ko na video pwdeng pwde :) nakakamiss din gumamit ng dcr02.

@@DEEMini4WDPH salamat po yung kasi inorder ko po sa shopee na tamiya kit dcr 02😊

@@soulwindgaming3599 nicenice. Mgnda rin ayusan yang dcr02 :) need mo lng patinuin ang MA kc mas matalbog sila sa ibng chassis kaya heavy dampers ang madalas ginagamit nila.

@@DEEMini4WDPH mag huling tanong po ako bakit po sa ibang shop ang mahal ng benta nila sa iba po mura 598 lang po bili ko nun sa iba benta nila 900 po

based sa experience ng mga kilala ko good sya if may digicurve ung track pero if wala mas ok daw ang rigid setup

maraming salamat sir

@@chrislyonelltan2572 you’re welcome sir

@@roscoechannel thank you roscoe

Yes sir. Narrow wide na medium size for stability

@@ryanlorenzo9990 yes sir, hindi takaw sa space pag nsa event ka. Yung iba ginagawa bumili ng acrylic divider para kasha max of 6 cars. Pero sakin ok na tong 4 cars lang magkasha para kitang kita ko yung mga oto ska para mapilitan ako na hindi nag magdagdag ng oto haha

@@chrislyonelltan2572 hi sir around 2-3k estimate :)

@@DEEMini4WDPH maraming salamat sir. more content po pra sa mga newbie katulad ko. god bless!

@@chrislyonelltan2572 thank you din sir. If meron kyo question message nyo lang ako sa fb (DEE Mini 4WD Ph). I’ll try my best to answer your questions

@@chrislyonelltan2572you’re welcome sir. If you have questions you can message me at facebook (DEE Mini 4WD ph). I’ll try my best to answer your questions

@@craggyboyhammertime3700 yes sir you can :)

You can message me in facebook DEE Mini 4WD ph so we can talk about your build

@@stephenjamesbutor6161 hi sir per one of my subscribers, he said you can clean dar by using using metal polish and a buffing machine. No need to soak them

@@saridahmohdshahuddin9124 ohhh that’s nice. I guess every racing center rules is different from each other.

@@chrisgaming6023 sa marikina area po sir.

@@ericconcepcion6952 hi sir, you can message me sa fb DEE Mini 4WD

@@q_p2891 painted lng sir

@@DEEMini4WDPH ayy wehh? Kala ko metal, tanong muna sana bago order🤣

@@ericconcepcion6952 hi sir. Meron lng po fee na P50 good for 2 hours then meron kyo sariling workstation with outlet for your charger :)

@@DEEMini4WDPH ah pde na din sir.. Malapit lang po ba yan sa riverbanks?

@@ericconcepcion6952 malayo po sir. Tapat po sya sa st.scholastica school marikina

@@yuki-san20ohhhh thanks for the info. Yeah I could try that on my next MA build. 😊

@@renatolaggui1 tires/wheels - medium size (low friction front, super hard rear). motor - power dash, gear - 4:2:1

@@ericconcepcion6952 mostly at tamiya shops, available most of the time. You can check out lazada/shoppee account of Brickyard or Tamiya Underground

@@thenextlevelplay4486 ohhh nicenice. Yeah I heard they also use singer oil but only for motor or roller brake-in.

@@HardzXElesis ohhh nicenice.. kapag madumi na ulit yung dampers gawa ako video gamit ketsup :)

@@ralparvinjaner2058 nice meeting you din sir :) see you around

@@shrekyesjuliet hehe. Yeah I’m hoping that they will organize a box stock race for adults. I’ll keep you posted on that

@@walker193356 I dont think it’s good on tires since we need it to be grippy. Welcome to the club :) enjoy building your kit. You may message me in facebook Dee Mini 4wd if you have questions. Ill do my best to answer them

@@DEEMini4WDPH oh no. I was saying could you create a video about cleaning tires next or whenever. I’ll definitely reach out to

@@walker193356 :) check out my videos I made one about cleaning tires using lighter fluid

@@bensoler573 hi sir, I tried it first but no effect. I think it only works for gold dampers

This particular metal polish (MC metal polish) should work for aluminum as well. Don't soak it (like in the video). Rather, you need to apply and buff the aluminum until it shines.

@@Sushikami ohhhhh nicenice. Thanks for the info. I’ll borrow a buffing machine and try that one.

@@hirotv5959 yes po cfm chassis

@@vincentmolina70 wala pa announcement sir. Kapag meron na ulit update po kita

@@thenextlevelplay4486 let me check if we have that one lying around the shop 🙂

Hi sir, i used 3.7 highspeed gear for the test run :)

@@andreumali918 hi sir you can direct message me at facebook DEE Mini 4Wd