- 113
- 174 069
5 Dollar Plans
เข้าร่วมเมื่อ 22 ก.ค. 2022
How to Build - Simple Farmhouse X Bench
In this video we walk you step by step through our entire build process of building our simple Farmhouse X Bench.
We set out to simplify the build process so it takes minimal woodworking tools and minimal woodworking knowledge to complete this project in just a few hours or less.
Plans for this project and others are available at www.5DollarPlans.com.
Just Like, Subscribe and Comment with your email address below for a chance to win a FREE SET OF PLANS.
www.Facebook.com/5DollarPlans
You can check out our own business page where we showcase all our daily builds we actually build for customers here:
www.Facebook.com/KCMillworksandMetal
www.Facebook.com/5DollarPlans
Contact Us:
Phone: 913-940-9808
eMail: info@5DollarPlans.com
We set out to simplify the build process so it takes minimal woodworking tools and minimal woodworking knowledge to complete this project in just a few hours or less.
Plans for this project and others are available at www.5DollarPlans.com.
Just Like, Subscribe and Comment with your email address below for a chance to win a FREE SET OF PLANS.
www.Facebook.com/5DollarPlans
You can check out our own business page where we showcase all our daily builds we actually build for customers here:
www.Facebook.com/KCMillworksandMetal
www.Facebook.com/5DollarPlans
Contact Us:
Phone: 913-940-9808
eMail: info@5DollarPlans.com
มุมมอง: 220
วีดีโอ
How to Build - Customized Wooden Tortilla Press
มุมมอง 2049 ชั่วโมงที่ผ่านมา
In this video we walk you step by step through our entire build process of our Customized Wooden Tortilla Press We set out to simplify the build process so it takes minimal woodworking tools and minimal woodworking knowledge to complete this project in just a few hours or less. Plans for this project and others are available at www.5DollarPlans.com. Just Like, Subscribe and Comment with your em...
How to Make a Custom LED Neon Sign - Treat Yourself
มุมมอง 979 ชั่วโมงที่ผ่านมา
In this video we walk you step by step through our process of making Custom LED Neon Sign. We show you every detail, the good, the bad and the ugly... But we stuck with it and in the end we have what I feel is a really neat looking sign... Be sure to check out our website at www.MyNeonFlex.com for more information on making LED Signs. Our other website for lots of great woodworking projects as ...
How to Make a Custom Led Neon Sign - Start to Finish
มุมมอง 17916 ชั่วโมงที่ผ่านมา
In this video we walk you step by step through our process of making Custom LED Neon Sign. We show you every detail, the good, the bad and the ugly... But we stuck with it and in the end we have what I feel is a really neat looking sign... Be sure to check out our website at www.MyNeonFlex.com for more information on making LED Signs. Our other website for lots of great woodworking projects as ...
Making a Custom LED Neon Name Sign - Start to Finish!
มุมมอง 16421 ชั่วโมงที่ผ่านมา
In this video we walk you step by step through our process of making our first ever custom LED Sign. We show you every detail, the good, the bad and the ugly... But we stuck with it and in the end we have what I feel is a really neat looking sign... Be sure to check out our website at www.MyNeonFlex.com for more information on making LED Signs. Our other website for lots of great woodworking pr...
Mason’s and Landon’s Paracord Bracelets - Step by Step
มุมมอง 46วันที่ผ่านมา
Mason’s and Landon’s Paracord Bracelets - Step by Step
How to Build - Wooden Cooler Enclosure
มุมมอง 738วันที่ผ่านมา
In this video we walk you step by step through our entire build process of building a Wooden Cooler Enclosure. We set out to simplify the build process so it takes minimal woodworking tools and minimal woodworking knowledge to complete this project in just a few hours or less. Plans for this project and others are available at www.5DollarPlans.com. Just Like, Subscribe and Comment with your ema...
How to Build - 4 Seater Pub Height Picnic Table
มุมมอง 9Kวันที่ผ่านมา
In this video we walk you step by step through our entire build process for our 4 Seater Pub Height Picnic Table.! We set out to simplify the build process so it takes minimal woodworking tools and minimal woodworking knowledge to complete this project in just a few hours or less. ORDER THESE PLANS NOW WITH THE FOLLOWING SECURE LINK! square.link/u/sCHVqfDO Plans for this project and others are ...
How to Build - Fence Picket Christmas Tree
มุมมอง 2.4Kวันที่ผ่านมา
How to Build - Fence Picket Christmas Tree
Editing Led Neon Sign Layout for Production
มุมมอง 4314 วันที่ผ่านมา
In this video we share with you our process of a very important step when creating your layouts for an Led Sign. First you create your sign layout but then you need to edit your layout for production and that's what we show you how to do very easily in CorelDRAW with our NEW! MyNeonFlex Helper Macro for CorelDRAW. It makes the whole process much quicker and easier. www.myneonflex.com
Calculating the Required Power Adapter for your Led NeonFlex Signs
มุมมอง 3114 วันที่ผ่านมา
In this video we cover how to Calculate the required Power Adapter for your Led NeonFlex Sign. We also show you some neat Power Adapter option for testing and powering your Led Signs without an outlet.
Creating Artwork for a LED Neon Flex Sign - Converse High Top - FREE DOWNLOAD!
มุมมอง 2614 วันที่ผ่านมา
In this video we show you our process for creating a design for a faux Neon Sign using LED Neon Flex. This design and many others are available as a FREE DOWNLOAD on our website at www.myneonflex.com. Find us on Facebook at www.Facebook.com/myNeonFlex.com.
CorelDRAW Macros Part 2 - Adding Command Buttons in User Form
มุมมอง 1714 วันที่ผ่านมา
Adding your code to Command Buttons in a new User Form using VBA Editor.
Intro to CorelDRAW Macros - Part 1
มุมมอง 1814 วันที่ผ่านมา
In this video we show you have to do some basic Macro programming to automate everyday tasks in CorelDRAW.
MyNeonFlex Helper - CorelDRAW Macro for Led Sign Makers
มุมมอง 3121 วันที่ผ่านมา
MyNeonFlex Helper - CorelDRAW Macro for Led Sign Makers
How to Connect a Kitchen Sprayer to a Garden House for your Outdoor Sink or Kids Mud Kitchen
มุมมอง 30028 วันที่ผ่านมา
How to Connect a Kitchen Sprayer to a Garden House for your Outdoor Sink or Kids Mud Kitchen
Aligning Your Artwork with Your Blanks in Lightburn
มุมมอง 23628 วันที่ผ่านมา
Aligning Your Artwork with Your Blanks in Lightburn
How To Laser Engrave a Custom Logo with the JTech 14w Laser
มุมมอง 89หลายเดือนก่อน
How To Laser Engrave a Custom Logo with the JTech 14w Laser
How To Make - Custom Fence Picket CNC Welcome Sign
มุมมอง 313หลายเดือนก่อน
How To Make - Custom Fence Picket CNC Welcome Sign
Hot To Make - Custom CNC Fence Picket Sign
มุมมอง 293หลายเดือนก่อน
Hot To Make - Custom CNC Fence Picket Sign
How To - Adding a Wood Burned Logo to Your Projects
มุมมอง 645หลายเดือนก่อน
How To - Adding a Wood Burned Logo to Your Projects
How to Build - Fence Picket Skull Chair
มุมมอง 605หลายเดือนก่อน
How to Build - Fence Picket Skull Chair
How to Build - Folding Fence Picket Candy Cart
มุมมอง 2.2Kหลายเดือนก่อน
How to Build - Folding Fence Picket Candy Cart
How To Build - Fence Picket Kids Mud Kitchen with Running Water!
มุมมอง 7272 หลายเดือนก่อน
How To Build - Fence Picket Kids Mud Kitchen with Running Water!
Vectoring a Bitmap Image with Inkscape the Easy Way!
มุมมอง 582 หลายเดือนก่อน
Vectoring a Bitmap Image with Inkscape the Easy Way!
Swap Satin Rails in InkStich - What Does that Even Do?
มุมมอง 482 หลายเดือนก่อน
Swap Satin Rails in InkStich - What Does that Even Do?
Digitizing the Paw Paw Logo in InkStitch
มุมมอง 912 หลายเดือนก่อน
Digitizing the Paw Paw Logo in InkStitch
Controlling Thread Trims and Thread Jumps in InkStitch
มุมมอง 922 หลายเดือนก่อน
Controlling Thread Trims and Thread Jumps in InkStitch
Great job !!
New subscriber here! The table looks great and easy to build. Your explanation is very detailed which is great. I've built several different tables of my own design. It was nice to see this style. I may attempt a similar design. Thanks for sharing your knowledge and talent.
Love this build! Unfortunately the woodworking plans link does not work for me.
I don't think his website works for anyone, he wants you to contact him by phone or email.
Thanks for working with all the tips and details. It might take a bit of getting use to but just change hands and cut in the opposite direction with the different saw. So the base sits mostly on the pice you are keeping and not on the off cut side. Good work bro
Really appreciate that you clearly and concisely gave all measurements and details of the build, vast majority of sites like this are just entertainment
@@petemisc4291 yes we try to give you all the details for a successful build but we do have plans available for a backup… Some projects plans are helpful but this one is simple enough where you can rewind a bit here and there and have a successful build….
Laundry's done!
What’s going on with your website? Cannot order these plans.
So we would need 10x2x4. Not 8 is that correct?
dude if your going around the top clockwise with the small saw all you have to do is turn the big saw around and cut counterclockwise.
While you can do that, yes the blade guard would then be to the outside It's still not how you would safely operate the saw. when you are right handed that's very awkward to be working across your body like that...
big one is a left handed saw. small one is right handed
CUTE!❤
You have the most creative plans and videos
Great video thanks
Great for a flower cart!
Nice
Those are Ryobi circular saws. Skil saw is a brand name.
They make left and right handed saws
I like the table, real nice. Aesthetically, to make the top look more finished I think that I would have cot the top boards with the saw table running against the eight peices they are fastened to. I would be just one simple cut on each side and the second cut not required. offering a shadow line. The eight peices and the top may need a little adjustment but easy enough to do. I am going to check out more of you videos. good luck
Hi. Could you make a lumber supply list? Would love to make one of these
The supply list and more importantly the cut list to make the most of of the material is provided in the plans and being the plans are only $5 for this project saving you a single extra board would pay for the cost of the plans... That said the project calls for: 8 - 2x4x8 3 - 2x6x8 1 - 2x10x8
I think you might have left out the size of the long part of the legs. Could you please give the length of them.
@@poor_shot_ace the legs are 45” long point to long point… Legs have a 20 degree mitre.
Awesome DIY vid.. found this short vid explaining the right and left handed saws... th-cam.com/video/IBcAwHK1fPI/w-d-xo.htmlsi=oPg3r0W_md34ugCz
You have a bunch of great videos that I have tried to find out how to buy the plans. The site doesn't show where I pick the ones I want to buy.
@@beardboxdesigns3262 sorry for now it’s best to just call or email us… The website is a slow work in progress… 913-940-9808 or kcmillworksandmetal@gmail.com
5:06 that’s the 720 Pro
I woodn't pay for those plans or that tree. That looks like a 2nd grader project. Im sorry. The other items are pretty cool.
Obviously it's subjective.... But when you see it decorated and what some of our customers have done with them I think most would find it pretty impressive... A couple for an example... facebook.com/photo.php?fbid=328741653259826&set=pb.100083719812461.-2207520000&type=3 facebook.com/KCMillworksandMetal/videos/918986259052726 We make and sell a lot of them...
Dont know if im push button illiterate or what,but every time i click the link to goto the plans page it dont show anything but some startup thing and then i click for more info like it says ,and i get no where,i will try and follow along for this one...i love skulls and i m slowly doing the cool cart for my neighbors lemonade stand for his 5&7 year old girls they love that thing and very profitable for them...lol
All nice builds but I think I speak for everyone that it would easier and more convenient if you could get your website up and running to buy your plans without having to contact you.
Anlatım için teşekkürler.
Love all your builds! Question, can you pls show us how you stain and finish your picket projects? Do you use a commercial wood conditioner? Or a DIY pre-stain to prevent bloching? Any advice to share? Thanks so much!
i have a fixture for things like squaring shelves like that. it's just a strip of dead straight wood as a reference fence nailed to a piece of plywood and a few toggle clamps on one side. the toggle clamps are the horizontal plunger type and they lock my square against the fence so i can use that as a reference. it works with a speedsquare but i made my own out of plywood that has a bit more reach for squaring deeper shelves. i also have some other common angles that can be clamped up as well. i use that thing all the time for a bunch of different things. ended up being one of the most useful fixtures i've ever come up with.
This is extremely helpful and just what I was hoping to find! Thank you very much for this amazing tutorial!
You talk to much and contradict yourself! Please don't take it negatively! Rethink your plan and resubmit.
@@LarryDeutsch-bd6hp this video was done as I was “figuring it out” which I thought I had put a disclaimer in there stating that… What looks good on paper doesn’t always work out in a real build…. But a guy should be able to get the idea of what I’m building nonetheless and can expand on it themselves to make it better… But I’ll probably make another video that will be more concise the next time I build it….
no links under plans.
Couldn’t you have put the braces on the back side ?
@@frankiannelli989 yes but I kind of liked the raised lip on the front side… I’m making another video where I’m doing a bobber shaped sign and the braces are on the backside on that one.
@@5dollarplans nice. Those machines are too much for my blood.
@@frankiannelli989 I got mine with a laser to boot for $1,400 plug and play so I thought that was a smoking deal! Shapeoko 3XXL…. With the 14 watt laser…
Great job, well done. Thank you.
Talk as much as you like. I’m listening!
Talk tooooo much just do it
Absolutely love this build........Bless you all..........WoW what an Idea.......💯
That's a good idea
This is a great idea for anyone looking to make money this project.❤lovely job.GodBless you and your family and friends.😊
I tried going to your website to download the plans, but it is not working. This is a very nice design. Hopefully, the website gets updated
If you haven’t tried already you might try using a desktop computer or even an alternate browser on your device. The website is working properly on all my devices and browsers but several Android users have been reporting issues…
Awesome job !!!
Now you’re talking my language. I mentioned before that I like working with pickets. I built a similar bar for my friends who are huge Texas fans. So I put a bigTexas star on the front of it using the burn method. However I did like a 3D effect to it. It really stands out. 👍👍for your videos
I’m not a big skull fan but this one looks really good. I appreciate your videos. I’m a big fan of using fence pickets. I have built a lot of outdoor “stuff “. It seems to hold up better in the weather. I look forward to seeing more videos. Thanks again
Love the project!
Wow I really like that idea of burning the outside of the bar
This torch is absolutely wicked! www.harborfreight.com/electric-start-propane-torch-91061.html?campaignid=12189149028&adsetid=118673836202&product=91061&store=186&gad_source=1&gclid=CjwKCAjw7NmzBhBLEiwAxrHQ-Xt5S_yiPhuldnl76Wy38bTKGTviwyZkJr3vRm9A0omHMizSakvLXBoCVNkQAvD_BwE I burned the entire bar, countertops, logo and all with a single 14oz cylinder of Propane and still have gas! which really surprised me with how much flame this torch produced. Maybe 15 to 20 minutes to burn the entire thing.
Website is not working. Nothing there to buy or free.
If you haven't tried already you might try using a desktop computer... You might also try an alternate web browser? The site is working fine on all my devices and installed web browsers for me but I have had scattered reports of issues for others especially it seems for Android users.
Nice project
Very well presented. Presenters logic is readily understandable.
Awesome, I have been playing with the same idea but can't see where you say it folds.
“Folds” may be the wrong word… there are 4 bolts with wing nuts that hold the lower shelf to the leg assemblies on each side. 4 bolts with wing nuts that hold the leg assemblies to the top frame. 4 bolts with wing nuts that hold the two roof supports. Take all those bolts out and it all “folds” up into one small package.
Nice ride. Those are beautiful rims.
Now that's a nice cart I like it.