วีดีโอ

Great question, are referring to the one in the center/front fairing behind the front wheel? It should all line up. I didn't have any issues. All fairings I used were original aside from the light cowl ones. Sometimes aftermarket fairings don't align properly. I've had that problem in the past. That's why I try to get them OEM.

@@jerometheband held up pretty good for spray paint. The only thing is it can get very light scratches from fingernails on areas. It will never replace real vinyl but 60% close. I wasn't expecting to. I'm happy with the results.

@@tomhavenda5294Badass, Thanks, I've been dying to make new videos. I haven't lost interest. I live in a place where they don't let you work on cars so I have to find a spot where I can work on the Liftback. I pretty much have everything I need to put it together. Congrats on the 77 Liftback. If you need anything or have any questions hit me up!

Lol 😆

Thanks bro, getting there slowly. If your rear end sticks out more on one side than the other then an adjustable Pan hard bar can help you align it as long as your spring perches, 4 link brackets and all the suspension lines up.

Hi Brother, sorry I haven't posted any vids. I had a death in the family and had to stop for a little while. Getting back at it soon! 😏 I promise.

It's not putty, it's soldering paste/flux and soldering wire and a torch.

Thanks for the feedback. I'm learning as I go and have stopped using background music on my recent videos. I appreciate you!

Thanks brotha! Espero poder terminar este carro en esta vida jajaja 😁 cuando la gente me dice, deberías pintar el carro rojo, deberías meter otro motor que no sea ese, deberías ponerle llantas nuevas.. les digo DEJAME VIVIIIIIIIR!! 😆

Made by the best! FOTU BEATS!! Se me olvido ponerte en los Creditos!! jeje Ahorita lo hago!

@cjs2000cs Thanks! I am trying to take the ideas I have in my head and transfer them to the car. LOL Every Time I remember something, I purchase whatever I need. Next video I will be working on the MAF sensor housing. I'll attempt to polish it. That's gonna be learning experience.

Thank you Jason, I'll keep it in mind for the next video. I'm learning as I go. Take care!

Thank you for subscribing and supporting the channel! I'll be uploading more vids soon!

@@larrysheran sure please upload more videos of the civic. Im working on my civic swap. And your videos are so helpful. Cheers

💯 lol

Thank you!!

Thanks! Once we fully seat the engine and exhaust we will jump on the wiring. Appreciate the support!

We will try! Larry Jr. found himself a job so we can continue funding the project. Thanks for your support!

Hi I got them from EBAY!

Hi bro, it's not hard. Just have to drill some holes and add spacers depending on what engine you plane to run. I'm doing a 1UZFE out of a 94 Lexus LS400 with an Mustang Cobra M112 Supercharger. Slow progress tho. I'll try to upload a nother video soon! Thanks for subscribing! Means a lot!

Not sure why that happened Manny, I had the power commander on it and had no issues.

Awesome brother, sorry for the late reply! Hope my troubleshooting helps you with your build! I'll try to upload some more vids soon. Thanks for subscribing!

Thanks for commenting. I don't remember saying I was gonna re-use the fluids but if I did I apologize. I actually purchased Engine Ice and filled it up with one 1/2 gallon container for $20. I did recover the old antifreeze and bottled it so no animals die if they ingest it. Engine Ice worked great and bike ran cooler than other years I've had in the past. 😁👍🏼

@@larrysheran make it into a stunt bike

Cinnamon Brown 🟤 BMW

I drained mine completely to fix it, then installed it, added distilled water and ran the bike for about 4 min then drained it again. After that, I filled it up with Engine Ice. About $20 per jug. I used a jug and a quarter. What coolant are you planning to use?

Thanks! I'm gonna get some more Celica Vids soon.

Gracias Edgar, pronto subimos más vídeos! 👍🏼

Thank you Chris, he rarely shows emotion but he was stoked with his dream car. Time to start looking at Honda Engines that would fit. We have one year to complete this for his 18th BDay.

Yes, it was painful but worth it.

Thanks! 🤗

and hopefully Hello 1UZFE lol 🤣 I'm purchasing the Donor car tomorrow!

😂🔧

Dale like mejor culey!

I know.. It's one of those life choices were my son and I debated on more horse power. We have decided to do an engine swap on the Celica. We have not yet decided on what engine will go in. To fund this we were obligated to sell the Rebuilt 20R but not only for money reasons. We wanted to make sure it went to a good home so I ended up selling the whole setup (Engine/Trans) to a great guy who is working on a 1976 Hilux. I know it's sad to see it go but trust me we gave it a lot of thought. On the bright side it will give us an opportunity to create more content for you. 😉 🤜🏼🤛🏼 😁 Check out today's video for the Part 2 engine removal at 10AM PT.

@@larrysheran Good on you, tough choices for sure. The original motor I believe only produced like 95hp. Frankly I couldn't beat anything. Tried against MG's, Triumphs, Datson's, Capri's and then gave up trying. So I want to do an upgrade for sure, just not sure what to do yet. Will watch your progress and what other folks have done in order to learn.

@@77celicagk Thanks, I know these engines were supposed to be Economy oriented. It just sucks that a "sports car" made to compete with US market was so slow. Lol I'm gonna be working on suspension and interior prep. Rust removal and sound deadening. My goal is to have this car as a rolling chassis so it be ready by the time I decide on what engine will go in it. I'm gearing more towards a 1UZ since parts are affordable and there are plenty. Everything will go in from under the car. Good things are coming as far as content goes. Thanks! If you have any advice let me know. I'm always open to learn and change the way I do my videos.

It was a pain in the butt, severe corrosion, etc.. same size pistons, used stock Toyota Valves since miraculously they were in great shape. We did have to weld the head's coolant ports/passages and then die grind them to shape. It worked out pretty good for a 40+ engine. Lol

Thanks!! @77celicagk You Rock!!

Thanks, feel free to ask any questions. We are here to work together. Wish you luck on your build!!

I'm learning this whole youtube thing. Little by little videos will be getting better. All of this thanks to feedback like yours. My son is happy, I'm happy and hoping we can make y'all happy too. We will have some fun videos next week. We will be playing with the door cards, removing sound deadening, etc.. Thanks again for your support!! You rock!

I call these Celica's "Rusted Piles of Gold" lol Thanks for the support! I Really appreciate it.

Hola Princess!!

Hi Luis, Never! It worked super well. I actually was so impressed that the money I saved that I bout 2 Jugs of Engine Ice and did a complete flush. Now bike runs awesome temps. One thing I will recommend and this is crucial. Make sure you pick out the the hole with a little fine pick like you see me do and also clean very well around it so it will retain the flux and give you a proper solder. Let me know if you have any more questions. Hope I could be of help. Thanks for liking and subscribing!

Around $3600 approx. I'll get you a more accurate number when I review the paperwork later today.

Here is a video of the bidding + about $600 in fees a tow expenses since I don't own a pickup truck. th-cam.com/video/6dGUZKUYnM4/w-d-xo.html

Larry Sheran I think I overbid on a 03 r6 on copart with 38k on the dash

@@ThatOneCubanKid Sorry to hear that pal. How much did you pay? Those go for around $1000 to $1500 depending on the damage and the State you buy in.

Larry Sheran I payed 1800 after all the fees. And I still needed to repair it

Thanks Rodney you're awesome. I buy them pretty much everywhere. OfferUp, LetGo, Ebay, FB Market Place, etc.. you just have to shop around for good deals and negotiate them with the seller. I was lucky I only needed some random OEM ones since the bike wasn't that damaged. I will be uploading more videos soon. Just waiting for this CoronaVirus to be over so I can Purchase another bike to rebuild and document it. Thanks again for the compliment. You rock!

Thanks Caleb, just an update. Sorry for that but the reason why I didn't get a chance to do a video of the bike exhaust is cause shortly after I finished the rebuild some guy ran a stop sign and I ended up crashing the bike. I have somewhat recovered physically from the accident and I'm in the process of purchasing another bike from Copart and will document its rebuild process. My apologies for no sound video and appreciate your feedback. Thanks!

@@larrysheran oh dang glad you're doing better bro! No worries understandable!