วีดีโอ

check out my video a place for all those shoes. i think i coverd it there. also rolled edge countertop

you will be satisfied !! amazing machine !!

Krystal Sealer has been designed to start its cross-linking (drying) with the addition of 10% (12.8 ounces per gallon) of M.L. Campbell C1491 Care Catalyst. Always mix catalyst in thoroughly before application. No waiting time is necessary before using this catalyzed product after catalyzation. Krystal Sealer has best performance properties if used before 8 hours. Explain crosslink in 2 part urethanes Crosslinking in 2-part urethanes refers to the chemical reaction that occurs between two components, commonly referred to as Part A and Part B, to form a strong and durable network of interconnected chains. This crosslinking reaction is essential for the curing or hardening of the urethane material. Part A of the urethane system typically consists of a polyol, which is a liquid or solid polymer with hydroxyl (OH) groups. Part B, on the other hand, contains a diisocyanate, which is a compound with two reactive isocyanate (NCO) groups. When these two components are mixed in the correct ratio, a chemical reaction known as polyurethane synthesis takes place. During this reaction, the isocyanate groups in Part B react with the hydroxyl groups in Part A, resulting in the formation of urethane linkages. This process is known as urethane crosslinking. The crosslinking reaction is typically catalyzed by a catalyst, such as a tin compound or amine, which helps facilitate the reaction between the isocyanate and hydroxyl groups. The crosslinking reaction is crucial for the final properties of the urethane material. It leads to the formation of a three-dimensional network of interconnected chains, which enhances the material's mechanical strength, chemical resistance, and overall durability. The degree of crosslinking can be controlled by adjusting the ratio of Part A to Part B, as well as the curing temperature and time. In summary, crosslinking in 2-part urethanes refers to the chemical reaction between the polyol and diisocyanate components, resulting in the formation of a strong and durable network of interconnected chains. This crosslinking reaction is essential for the curing and hardening of the urethane material, leading to improved mechanical and chemical properties.🙄

thanks !!!! good info !!

got to through in a little funny now and then to keep your attention !! Thanks much for the comment !!

thanks so much for the complement !!

two reasons (1) I am old school. I have never applied ceramic coating before. (2) I wanted to create a video that the average person felt comfortable in doing. The machine and chemicals were affordable and readily available at the local harbor freight store.

Thank you !!!

thank you !!! i was wandering about pronunciation !!

@ThatISPerfection rinnai are good units . Got many units installed in restaurants for their water uses Good tech support if/when I need them

@@charlespipitone2324 Thanks for the comment !! the quality seemed there when installing the unit ! so glad Tec support is there as well !!

@@charlespipitone2324 thanks !! it is so good to know money well spent !!

There were no grounds coming from the origonal head unit to the original amplifier. The grounds to the speakers were coming from the amplifier only. There were only 4 hots coming back. So I ran a 4 wire back from the new head unit for the grounds. hope that clears it up. but thanks for the comment !!

ahhhh thank you !!!!

Good question ! The product is about 1/4" thick plastic and then a color sheet is applied on top of the substrate. I do not know if the adhesion is heat activated. I am a retested dealer for sentril. I have reached out to customer service for there input. May be after the holidays i hear back from them . But i will keep you posted !!

Appreciate it 👍

Ahh thank you !!

amazon blue ocean . spa392b. sorry for the delay. merry Christmas !!

blade in normally. 40 tooth finish carbide tip blade

Thank you !!

Thanks man !!!

Ahhh thank you !! i have several more tool reviews and more planed. thanks for the comment !!

After you have the back wall up. Take your side wall piece and hold it up to your back wall piece. There may be a gap between the two. So you take your scribe ( like a Childs compass) set your scribe to the widest point. Run it down along your back wall. This will put a pencil mark on your side panel. This is what you to cut, plane or sand off to get a tight joint. Hope this helps

@ ahh thank you. Got it! Thanks for the video. Will be setting mine up soon did you glue the shower floor/base down too?

@@fernando651 No the base has about a 2" flange to screw it to the wall. I use screws made for hardie backer. ( thick and no rust )

In doing some research it is not mentioned on Harbor Freight site. In digging deeper The "internet" says that Hercules tools are manufactured exclusively for harbor freight buy a company called Global Machinery Company. Researching them does not provide a lot of information. Sorry I could not be more helpful🙄

thank you !!!

yea you missed it starts at about 20 minutes in

@@ThatISPerfection WHAT THE??? Something must have gone wrong the first time I watched it. Wonder if it skipped ahead and I didn't notice.

@@miscbin possible

Thank you !!

ahh thank you !!!

yes amazing company , amazing product, amazing customer service team! And yes I to find it hard to slow down after a lifetime of working.😀

thanks !!

yes a few areas i had to work by hand. I am considering a smaller unit for those tight areas.

you are quite welcome. have been meaning to combine the 6 vedios into one with chapters. some day

SHWEEET. I love a bargain ! My wife calls be just plain cheap. But to get that quality product at that price AMAZING !!! enjoy your new toy !!😁

So sorry on the delay getting back to you ! You are right I did a search and the only way to find the pad was on eBay. I assume warrior stopped making it. Because Bauer did not have a waxing pad, ( the reason i went to the warrior.) I did notice on amazon that McGuire's offers a polish pad. keep me posted on how things turn out 😄

I am so happy to hear you enjoyed the video and followed the process. I will have to check out the wax you mentined. always looking easier and better products !! thanks for the comment !!😁

Thanks sooo much !! You will not be disappointed !! Its a great tool. You can find out more on my video where i review the tool

Thank you Steve. So nice to be apricated !!

i had some ink left in a old printer, so new printer set for 3 months. thats the longest it set, no problems in a 3 month time frame

So Glad it helped !!

The speed dial has just enough (clicky fill) to hold it nicely into place. But moves with very little effort. What I really like is the placement. The manufacture has it placed in a very comfortable position to adjust with your thumb. That having been said... i am a cabinet maker with well over 100 dewalt tools. my wife refers to me as a dewalt whor.... well you get the jest. I was spectacle at first but after many hours of use polishing with this tool it convinced me. I would not hesitate to try another hercules tool !! :). it was WELL worth the money !!!

To make a recommendation it would depend on how you are painting your cabinets. If you are painting them with latex paint and a brush. The first thing I would do is not only to clean them. But areas around the range you would want to remove any grease build up . Those areas I would clean with denatured alcohol. Also areas around hardware. If you fell a stickiness in those areas you are seeing a break down of finish. Those areas must be removed of finish. Next purchase fine sanding sponges from Sherman Williams ( 3 m brand). Scuff sand the entire cabinets and doors. ( you are not removing the finish you are giving the paint something to cling to) a good sign is that you are dulling the finish. Next primer then pain 2 coats of paint. If you have taken the cabinets down and you are going to spray them then… prepare the same as above then use M.L.Campbell clawlock primer let dry 45 min. scuff sand. Then two coats of M.L.Campell paint 45 mininites between coats. Wait 1 hour then 1 coat of M.L. Campbell Krystal dull ( this is a clear top coat with about a 15% sheen) all of the recommended M.L.Campbell products I recommended are post catalyzed ( this requires 10 percent catalyst ) ) Hope this helps !! If you are spraying in a area above 75 degress i would add 10 percent of M.L.Campbell retarder to all the finishes ( slows dry time)

When I was younger I hand waxed my cars. BUT this process brings a hole new life to paint. Yes it is time consuming but the results are priceless. I have purchased tools my entire life. I was a little apprehensive when buying this polisher BUT the quality is astounding !!

@@ThatISPerfection Thanks for the review. Picked one up yesterday. Perfect timing because harbor freight had a coupon for this polisher for $100 before tax.

@@JulietHotelFoxtrot WOW nice . Enjoy you will love it

Thanks so much !! please check out my other videos for more tips :)

Thanks much for the comment. I was amazed at the quality of the machine and highly recommend it !!

Thanks so much for the comment. Exactly what i was hoping for !! I want my channel to be about teaching . Trying to pass on what i have gained by hands on. keep posted i will be sharing more as time becomes available.

So Glad you liked it !!🤩

Thank you !! a man can never have to many clamps or tools :)

shop is 38 x 60 if you include the area that is elevated where small equipment is on and also the compressor behind the door to the left and restroom that is about 8x8 by compressor. Thanks for question. Its small but I ma proud of, have turned a lot of beautiful jobs out of there !!

There has been a lot of questions in regards to the pads. I decided to put it in the description. hope this helps !!

thank you !!

I am in pa. semi retired, just trying to pass on some knowledge 😃