If you just bought the mini 4 pro and is having those problem, mqke sure to calibrate all sensors on aircraft amd RC before flight and update through dji fly had this issue and now drone flys perfect
DJI is the king of planned obsolescence. He forces you to buy batteries even if they are almost new. DJI battery software is total garbage. I will never buy those thieves.
Me paso lo mismo con mi dron 4 mini pro el mismo dia que lo compre, estaba aprendiendo a volarlo y lo choque porque se desactivaron los sensores en el vuelo. El dron se rompio un brazo. Lleve el dron de vuelta a DJI para que me den uno nuevo. Estoy esperando su respuesta.
Does its sensor work at night without propeller...? Please answer.., Because the sensor is not working at night in my drone (mini 4 pro) Please check and answer 🙏
I had the same issue and called DJI which asked that I sent the drone back to them but I got busy and didnt. About a month later I came back to my drone to see if maybe a software update was in place and Nada. I went through forums and did a little bit of research and Nada... Anyway, I could go on and on but what really fixed my issue was a "RESET ALL SETTINGS" procedure on the DJI Software app, it's in the "about" tab.
If you're using a propeller guard the sensors will not work ,i had the same problem and when i took the guard off all sensors working 100% very easy fix
February 10. I had this identical problem today on my brand new Mini Pro 4. Many people have this problem on the DJI forums and I think it might be related to a firmware update. Some say it resolved after a day or two, but some had to send their drone back for a replacement. Good luck, I have to get in touch with dji tomorrow if it still does not work for me.
I have the dji mini pro 4 and had the vision sensor error where it said BKWD and FWD unavailable as well as UP/DOWN and LEFT/RIGHT. The H icon in the upper right was red. I could not launch the drone as the launch icon was unavailable. I have the RC2 remote. I did the latest firmware update and the H was still red with the same message but the launch button was available now on the screen. I contacted dji through the chat to make sure the vision sensors would work and they said the H will remain red with the same message above but the H will turn white and the message goes away once you launch. I tried this and it worked.
So I had that problem and apparently if there is not enough IR light, the sensors will not turn on. Those sensors are actually cameras I thought they were lidar. So just take it outside during the day light and they should activate. They do not work at night.
Take to an open field when its nice and sunny and let it calibrate i had a small crash and mine wouldn't takeoff. It tried to recalibrate in my house a lot of times. Took it outside and instantly worked
Brand new drone with vision error can’t take off dji support sends email that says check firmware and restart aircraft lol fucking broke bullshit. Using rc2 controller
No. Send krna bhai aapke
How you acrivated vision sensor
If you just bought the mini 4 pro and is having those problem, mqke sure to calibrate all sensors on aircraft amd RC before flight and update through dji fly had this issue and now drone flys perfect
DJI is the king of planned obsolescence. He forces you to buy batteries even if they are almost new. DJI battery software is total garbage. I will never buy those thieves.
Mas um amigo o meu tá assim vc poderia falar no vídeo explicando melhor por favor companheiro
Me paso lo mismo con mi dron 4 mini pro el mismo dia que lo compre, estaba aprendiendo a volarlo y lo choque porque se desactivaron los sensores en el vuelo. El dron se rompio un brazo. Lleve el dron de vuelta a DJI para que me den uno nuevo. Estoy esperando su respuesta.
Does its sensor work at night without propeller...? Please answer.., Because the sensor is not working at night in my drone (mini 4 pro) Please check and answer 🙏
Same problem mavic 3 classic
what you had done sir..
I need help with this problem in my Air 3, please help if you can thank you 🙏
mine is also on Air 3, have you found a solution
I had the same issue and called DJI which asked that I sent the drone back to them but I got busy and didnt. About a month later I came back to my drone to see if maybe a software update was in place and Nada. I went through forums and did a little bit of research and Nada... Anyway, I could go on and on but what really fixed my issue was a "RESET ALL SETTINGS" procedure on the DJI Software app, it's in the "about" tab.
Reset all settings fixed this shit?
@@ismailakgun97 yup, my propellers would not even run when that error message popped up, reset to default settings and fixed.
@@GT_Rider76 when this error go on on my drone its see ghosts in sky and auto brakes sometime i will try now reset all settings to avoid ghosts 👻
@@ismailakgun97 well, how did it go?
what you have done thus far?
If you're using a propeller guard the sensors will not work ,i had the same problem and when i took the guard off all sensors working 100% very easy fix
February 10. I had this identical problem today on my brand new Mini Pro 4. Many people have this problem on the DJI forums and I think it might be related to a firmware update. Some say it resolved after a day or two, but some had to send their drone back for a replacement. Good luck, I have to get in touch with dji tomorrow if it still does not work for me.
It´s ok now?
I have the dji mini pro 4 and had the vision sensor error where it said BKWD and FWD unavailable as well as UP/DOWN and LEFT/RIGHT. The H icon in the upper right was red. I could not launch the drone as the launch icon was unavailable. I have the RC2 remote. I did the latest firmware update and the H was still red with the same message but the launch button was available now on the screen. I contacted dji through the chat to make sure the vision sensors would work and they said the H will remain red with the same message above but the H will turn white and the message goes away once you launch. I tried this and it worked.
Even though it's flown, it's still the same as mine
So I had that problem and apparently if there is not enough IR light, the sensors will not turn on. Those sensors are actually cameras I thought they were lidar. So just take it outside during the day light and they should activate. They do not work at night.
Thankyou
Same issue please help me
Hi, have the same problem. Can anyone help?
I also have the same problem
I had the same problem ,if you're using a propeller guard,the sensors will not work so take it off ,my problem was solved
AIR 3 gimbal placement software
Air 3 setting ka option
How you fix it?
I hade the same problem, if you're using a Propeller Guard sensors will not work,so take it off ,my problem has bin solved
Sports mode that vision sensor message comes up. Normal mode it goes. And depending on light if it's in the shade that message also appears
I have the same problem! Please, help!
Hi , please check the Latest Firmware Update And try to do calibrating using DJI Assistance 2 ( Consumer Drones Only )
how to solve thhis?
Hi , please check the Latest Firmware Update And try to do calibrating using DJI Assistance 2 ( Consumer Drones Only )Software
@@NMCNMC-ie7ol In DJI Assistant there is no calibration menu for the DJI Air 3 unit
@@NMCNMC-ie7ol Yeah, but that software is so "great" that apple REFUSES to install in!!
Having the same problem, cant fly at all, help 😢
Take to an open field when its nice and sunny and let it calibrate i had a small crash and mine wouldn't takeoff. It tried to recalibrate in my house a lot of times. Took it outside and instantly worked
use a landing pad really works i had this problem too greetings Jan
Sorunu nasıl çözeceğiz ?
same shit happens to me!!
Same Problem 😢
Same problem bro
Same problem is happening with me
Brand new drone with vision error can’t take off dji support sends email that says check firmware and restart aircraft lol fucking broke bullshit. Using rc2 controller
Anyone fucking fix this bullshit ?
So great... great to make a friend with you...i subscribe of you...its nice
I have this same problem can someone plz help me
Hi, i have the same problem! Can you help me how to fix! thank you
Any updates?
Now it's working, Needed programming
@@HemajyothiMachupallii mean. How?? Did u do it?
@@HemajyothiMachupalliso who does the programming?
What programming ? My firmware says up to date and have same issue
I HAVE SAME ISSUE, BUT WHEN TAKE OFF THE RED MSG ERROR WAS GONE.... ALL GOOD!
How are things?-bravo,interesting !so long,Nmc.
How did u fix the issue??
software programming
@@HemajyothiMachupalli where to download the software
@@HemajyothiMachupalliwhat you did you done?
What do you mean by that@@HemajyothiMachupalli ?