- 102
- 59 391
Michael Zajdel
เข้าร่วมเมื่อ 26 ก.พ. 2010
TRX450ER Project Final Build Result
Here it is TH-camrs!!! The finished 2024 TRX450ER!!! Turned out awesome! Let me know what you think in the comments!!!
มุมมอง: 182
วีดีโอ
2024 - MWXC Sandstone, AM ATV
มุมมอง 2417 ชั่วโมงที่ผ่านมา
Went 2nd into the woods and made the pass for 1st within the first couple miles of the lap. Held 1st place for 3 laps until I couldn't hold the pace anymore. Dropped to 2nd with 2 laps to go and then dropped to 3rd on the white flag lap. I'm still happy will the results. I ended up in the top 20 overall for the day.
TRX450 fourth rebuilding update
มุมมอง 1239 ชั่วโมงที่ผ่านมา
Fourth update for the 2009 TRX450ER. Added some more go fast parts and going to have this machine ready for this weekend at IXCR's Whiskey River.
2024 - MWXC Walnut Creek, AM ATV
มุมมอง 57721 วันที่ผ่านมา
Mike Zajdel #79, racing at MWXC, Walnut Creek in North Salem, Indiana. This is row 7, 4x4 of the AM ATV race. There were 3 in my class. I was able to make the pass in a bottleneck and was running in 1st until my inner tie rod separated at the ball joint. I was able to make repairs in the pits and returned for 3 more laps. I completed 4 laps total, 3 of them with zip ties holding the tie rod in ...
2024 - IXCR, Mission Impossible, AM ATV
มุมมอง 3.9Kหลายเดือนก่อน
2024 IXCR Mission Impossible, AM ATV, Row 1, Warrior/Front line class. Struggled all week with a medical issue and came to the race dehydrated. I did the best I could to stay hydrated but fell on my face in the 4th lap. Completed the race on the lead lap and ended up 4th in class. I didn't check the overall sheet before I left the race because I was just too tired to walk over to the results.
TRX450ER Third Rebuilding Update
มุมมอง 156หลายเดือนก่อน
Third rebuilding update for the 2007 TRX450ER. Wasn't running correctly with the jet settings from the previous carb build. Got it running with a 175 main jet, 48 pilot, 55 leak jet, and 2.5 turns on the air/fuel mixture screw. Added some more parts, just waiting on the suspension to get finished and I'll get it all put back together to race it.
2024 MWXC - Pioneer Village, AM ATV
มุมมอง 567หลายเดือนก่อน
Mike Zajdel #79, Midwest XC racing, Pioneer Village, AM ATV, Row 7, 4x4 in Rosedale, Indiana. 1st in class and 15th overall. There was a crash on the 1st turn and luckily I wasn't involved!
2024 IXCR - Battle under the bridge, AM ATV
มุมมอง 691หลายเดือนก่อน
2024 IXCR AM ATV race called "Battle under the bridge" located in Brazil, IN. Mike Zajdel #79, row 1, Warrior/Front Line class. Ended up 2nd in class and 29th overall for the day. Damages noticed after the race: rear passenger flat tire, leaking front differential, broken exhaust around the tail pipe.
2024 MWXC - A&TV's Hideaway, AM ATV, Row 7, 4x4.
มุมมอง 490หลายเดือนก่อน
Mike Zajdel #79, Polaris Scrambler 1000, AM ATV, Row 7, 4x4. Ended up taking the WIN! 1st in class and 19th Overall!
2024 IXCR - The Real Rock Run, AM ATV
มุมมอง 1.4K2 หลายเดือนก่อน
IXCR AM ATV, Row 1, Warrior/Frontline Class, Mike Zajdel #79 is the racer on a 2018 Polaris Scrambler 1000 4x4. Track had everything you would expect in a XC race. Ended up 2nd in class for the day.
TRX450 Second Re-building Update
มุมมอง 532 หลายเดือนก่อน
It's been about a month since the last video. I wanted to give an update of where I'm at with this re-build. It's getting closer to the finish line. Still quite a bit of work to do, but when it's done, it will be like a brand new machine.
2024 IXCR - Pleasant Ridge, AM ATV
มุมมอง 6602 หลายเดือนก่อน
Mike Zajdel #79, Polaris Scrambler 1000, racing at IXCR Pleasant Ridge in the adult AM ATV race. Row 1, Warrior / Frontline Class.
Murphy and Daddy on Hellbender Mountain Coaster in Gatlinburg, Tennessee - Anakeesta
มุมมอง 373 หลายเดือนก่อน
Murphy and Daddy on Hellbender Mountain Coaster in Gatlinburg, Tennessee - Anakeesta
Murphy and Mommy on Hellbender Mountain Coaster Gatlinburg Tennessee - Anakeesta
มุมมอง 713 หลายเดือนก่อน
Murphy and Mommy on Hellbender Mountain Coaster Gatlinburg Tennessee - Anakeesta
Honda TRX450 Gusseted and Powder-coated Frame, Subframe, A-arms, Swingarm, & Front and Rear Bumper.
มุมมอง 773 หลายเดือนก่อน
Honda TRX450 Gusseted and Powder-coated Frame, Subframe, A-arms, Swingarm, & Front and Rear Bumper.
Race Season Update: New Race Quad Build
มุมมอง 2634 หลายเดือนก่อน
Race Season Update: New Race Quad Build
2024 IXCR - King of the Mountain, AM ATV
มุมมอง 2.1K4 หลายเดือนก่อน
2024 IXCR - King of the Mountain, AM ATV
2023 MWXC UTV PRO Hill compilation - Liberty Falls
มุมมอง 1.6K10 หลายเดือนก่อน
2023 MWXC UTV PRO Hill compilation - Liberty Falls
Can-am Maverick X3, yard darts, and barrel rolls off creek jump during race.
มุมมอง 383ปีที่แล้ว
Can-am Maverick X3, yard darts, and barrel rolls off creek jump during race.
Looking good! Good luck this weekend.
@@701racing6 thanks! I’m sure I’ll have a blast!
I honestly wouldn't mind riding these trails long as those dang sxs are not in it😉😉👍👍
@23MikeJ22 the ATV's and SXS's run at different times and are not on the track at the same time. Adult ATV's follow Red arrows, white background and the SXS's follow the Black Arrows with Yellow backgrounds. We do sometime ride on the SxS track but it's mostly Red arrows. You can see the arrows in the video stapled to the trees.
They should probably send everybody one at a time with a minute Gap in between and race the clock
How is this a race if you can't pass anyone
You clearly have no idea how XC racing works.
Man, those looked like some tight unkept trails to be racing on in some sections.
@@robertwest4299 sometimes the race track builders use virgin trails which is nice at times because it’s smooth and not rutted up.
I just finished building my 07 trx450er and added Glann Innovations dual fan set-up that uses two settings thermostat to engage fans at different temps with engine running. I also use a Shoria battery that is super lightweight and has 210 CCA. Hope to see more about your build.
@@j.need4qlife483 great idea! I’ve been thinking of replacing the stock fan with an oversized fan. I’ll take a look at the Glann innovations fan. Question: does it illuminate the red overheat light if it’s tied in with the ECT sensor? I’m trying to not mess with the light so I know when I’m overheating. I think the issue with my cranking is a result that the clutch side didn’t have oil in it and it was sticking. I haven’t tested that theory yet as I just added oil to it and haven’t started it yet. I have a rekluse CX autoclutch that will be installed but I think I’ll get it all set up first before replacing the clutch pack.
Man this is why I don’t race anymore, so competitive I’d do that on purpose but hate watching them get slammed into by the slow guys in border cross 😂
Tough tight track and your doing good brother never give up and keep the throttle pinned!👍
Thank you!
@@Zippy7901 I used to watch Bob Sloan race as a kid th n id go home and run the guts out of my Mojave lol then when I got a 250r things really came to me..this is like a look back in time for me ... haven't got to race so when I see you giving it all your love out there I got to go into pit crew mode and cheer you on brother 👍💯
@@MikeyMetz-pt1yn I’ve been racing since 1998! Motocross 1st, then started XC in 2008. I’m 49 years old and going to keep going as long as I can! I’ll be in the super senior class next year!
Can't be a nice guy and let everyone around, make em work for it lol
I don't mind letting them by so that I can run my own race. Sometimes letting them go by makes me go faster too. I'll pass them back if I catch up to them again or if we are running about the same speed in the woods.
Is there a water truck around?
There was a water truck wetting down other parts of the motocross track and the main drive to keep dust down in the parking area.
Dust sucks!
@@mikebates2050 yes! It only sucks when you’re not out front! lol
Mustard does work for cramps...
Mustard??! That's a first! LMAO
@@JVoss-ny2xg I know, right!?!? lol
💞Wow🤍💚💚💚💚🤍💚💚
I didn’t mean to be shitty when I revved and yelled at you I just had dudes on my ass. Great footage.
It’s racing and adrenalines are high. I don’t hold grudges. I was trying to recover from my crash and that off-camber was kicking my ass! I’m pretty good about moving over and not holding up racers behind me.
Race it!
What place did you get
2nd in class, 28th overall
Good job 💯 @@Zippy7901
You're knocking out the races this year!
There are about 20 more for the rest of the year! Lots of videos!!!
🎉🎉🎉😮😮😮😮
Bein kinda douchey to the spectators there when you went around that first bottleneck
what up zippy! good race!
Thanks! I still need to do some work on the suspension. It’s still a little off. May need to go aftermarket Custom Axis.
I was the one that was passing on the left when it happened. It was like slow motion watching it go back. Luckily it didn't smash you.
I think there was 3 4x4's total at this race today and one of us eats dirt, crap.... I'm the big guy on the tan renegade. I love how your machine was setup. It looked fast and by this video I could tell your going way faster than me. I am the slowest guy on the course but I manage to get 3 to 5 laps a race unless I do what you did. Dude, when I saw you come off the bike,,, I'm sitting in my chair going (oh shit - oh shit)!!! My renegade is 800lbs and I think yours is similar. If that bike would have hit you while you were rolling....?☠☠☠ I did something similar at the round #4 race this year. The guys behind me said the renegade was standing on my chest with 4 wheels in the air at one point. It slammed into the bottom of that gully hard. My chest and under my left arm had heavy black bruises, may wrist were jammed, and I saw stars when I blink for the next 3 days....
My machine shouldn't have had any issues with the little hill. I just had my suspension valved and I had them set way to soft. It was causing my rear end to squat too much making my front end way too light, so when I was going up hills my front end kept lifting. Just a bent steering stem and, yes, you don't want these machines to land on you. If you scroll through my videos, I have one where I was on a Renegade and front flipped it.
th-cam.com/video/LFn-sTU17GA/w-d-xo.html
You jumped right back on it.... I just might have wanted to call it a day after that. At your up coming races if you see a guy that is just to big to be racing and he is on a renegade with the number 885, come on over and say hi... @@Zippy7901
How did this bulletproof kit work out. I need to get one
Yes! It worked great!
i would have done what u did on the hill just keep going they shouldnt have been on the track
That was epic! Good job not hitting him on the other side!
I was committed to the jump, so when I landed, I steered to the rear!
W
“Go daddy, go, go!”
Too much power for bundy hill 😂
Stage 5 throttle response was super sensitive. Sometimes in tight woods conditions, it was just too much. Stage 3 had a good response in the woods. Depending on the track layout I could switch stages as needed. Stage 5 would be ideal for open woods or short course racing.
Great video. That diff had you breathing hard bud 😆
Good video zippy!
Are you running aftermarket assassins exhaust and blow off valve too??
Yes
@@Zippy7901 sweet thanks cause I just ordered that exact same setup can’t wait!
Very nice
Thanks Binh!
Very cool idea I was gonna wire a toggle on the bars from the battery to the fans which would work the same but this is lots cleaner my only concern is might it pop the fuses for the lights with the extra draw from the fan and update would be very cool 😎 thanks for the info
Put some anti seize on there when you put the new axle in. That will help them come MUCH easier next time.
Yeah, these were really dry. Probably the original axles. I usually put grease in there to keep them from getting dry.
.🏆🏆🏆👍🙏. Subscribed Thank you for sharing
Thanks for sharing 🏆🏆🏆🤗🙏
With the high beam off/low beam on, does work normally
No. This wires the fan to be on all the time which is what you want on these machines. They tend to run hot especially if you don't have a capped radiator mod.
Ouch, must have been on the brakes?
the camera mounted there instead of the helmet you can really see how bumpy the track was.
I won the C class championship on those tires. I run maxxis rzr II's now.
Those tires have NO tread, you need ITP GNCC tires if your gonna do harescrambles.
yes. made me a faster rider because i didn't have to mess with the clutch. could concentrate on turning without worring how much clutch to give. And no more stalling and makes uphill climbs a breeze. If you do decide rekluse, get the whole thing. Z-start Pro with rekluse friction plates and clutch basket.
I like them...they are CST Ambush tires...they hook up good and still allow you to slide into corners if needed. These tire also took me to a Championship title. I have not run any other tires to compare other then the stock tires and the stock tires suck.
@DerbyDriver20 I'm going to move up to B 24+ for 2011 and try to win a new title against the younger guys. Besides, I'm turning 36 this year in March and wouldn't be eligible to race in this class anymore. Thanks for watching my video. I am extremely proud of what I accomplished in my first full season of racing quads.
so do you have to move up to B now or get to come back and try to defend your title?