วีดีโอ

I wonder if the high setting on a blow drier would do the same?

Best video ever. Going to try it on wood stairs where I took up old carpet. Should I apply foot traffic protection like polyurethane afterwards? Thank you.

Can hear some woman screeching in the background and this guy gabs too much

That's not clean.

Yep. Used my lawn blower. It looked like a dust storm outside!

Nope nope nope. Over 2 minutes in and you STILL have not started telling how to do it

What should i do if i don't have a vacume cleaner?

The problem isn't so much taking out 20 or so screws and taking it apart, it's putting it back together again. Thanks! 😊❤❤❤

to be sure I understand this correctly this is dish soap?

Great, now I have to purchase a strong vacuum blower.

I use Dawn dishwashing soap so I will try to clean my floors with it using your method. Thanks for the video!

Bro I can’t hear what your saying

Since purchasing it, th-cam.com/users/postUgkxQuBMI30VhO6fDed6NOsYftsoNa8x0UZ5 this fan is a trustworthy companion during the hot nights in Texas for me. The sleep mode is really quiet and gives you smooth wind to cool down. At full speed the fan is quite noisy but also very strong.Only weird thing is that if there is a draught from another fan, the sleep mode would speed up occasionally (getting a bit louder, probably to level 2 out of 4). This never happened so far when I used only this fan though.

Thank you so very much. My laminate floors looks new. Zep wood cleaner made the floors looks muddy.

So annoying; could have been done in a minute.

What kind of soap are you using ?

Thanks 10000

I have been doing this for years. Mist people don't have a powerful blower though. It's pretty handy.

Definitely going to try this at a client's house with OdoBan as my soap. Their kitchen floor has the same texture and regular mopping (to me) is not getting the floor clean enough. I've got knee pads, soap, a brush, and a bucket. I'm ready! 😄 Thanks for posting!

Your fan looks absolutely disgusting. How old would you ever let it get so filthy in the first place?

Babbles too much and doesn’t get to the point fast enough

Thanks for sharing how to clean my Tower Fan.

Using compressed air and desinfectant works better for me but not everybody has an air compressor

Should have been a 15 second video

This scrub brush doesn’t scratch because I’ve been wanting to do this but keep searching for a wood floor scrub brush that won’t scratch but can’t find a specific one and was afraid to use the hard brish

Thank you

I would take a shop vacuum and get up the dirty water

This video is nonsensical. There is the same amount of dust in the device as much as you see on the outside. Hence this cleaning w/o unscrewing the back cover is not complete.

Thank you! A mop with a brush on the end like your scrub brush will make this much faster and easier on you.

Can't hear or understand half of what he's saying

Brilliant! Thank you!

Awesome, all I need is another uncommon appliance.

We just took the brush attachment off vacuum and brushed down side and back dust fell on floor swept up the front was harder to reach so we vacuum dust

I use an electric leafblower on the lowest speed from a few feet away. Have cleaned expensive Gaming PC's the same way for a decade. With Gaming PC's just do it elevated so little pebbles and rocks don't get in there.

So you need a vacuum blower for this method….got it!

That’s the lazy way to clean it! You should have vacuumed it or take it apart and wash it ! don’t be lazy!

This was a lucky find. That is my exact same unit so things worked or perfectly for me 😅🙌

Why would you blow all that dust through the tower? Vacuum the dust first and then use the blower. Finally the back of the tower is still dirty get a soft brush attachment for the vacuum and finish the job.

I agree this is a great idea for dust bunnies but when you take that cover off you will be shocked how dang coated on the dirt is on the inside spinner. I'm not a smoker and I don't live in a dusty area and it was D-I-R-T-Y! Took me a few hours just to clean the inside spinner. Outside was easy because I just hosed it down, but the inside is attached to the motor and I didn't want to take the whole thing apart. Although next time I will. I'm sure it'll save me a good couple of hours. And to tell you the truth I still am not satisfied with the cleaning job. There's so much more stuck on there that could come off, but the dang mosquitoes made me run for cover with fan in hand. They're gnarly this year!

Anyone know the water/soap ratio?

Use a leaf blower

Great idea! Thank you! So glad I found your video!

This is ok for fast small clean but you really have to open in up and clean the long tower blade that spins. That blade inside is about 4 feet tall and it's rounded . There is so much dirt gets caked on that blade, the blade is most important thing to clean. Take it from me , I'm an electrician 😆

Where you get scrubber from?

I have a move out clean and floors are natural wood this will be tried. Fingers cross it makes these floors amazing they are in bad shape

I put a pantyhose on mine and cover it

Thank you. I need to clean a few worn patches before reapplying the varnish. I would have never thought cleaning it was so easy!

Life saver thank you 🙏🏾!!!

Oh wow !! use the shop vac discharge !! Genius... wait.. no not really... does this really need video ? I only clicked cuz I thought it was something better.

i never get why people are btching about tower fan hard to clean? just vacuum the damn thing every now and then so it wont clot simple