Awesome ! Works for us in digital mode. In mix-mode we didn´t quite got it. (We us FreePBX running on a Raspberry Pi to handle Radio IP-clients only sitting on the very same LAN as the repeater).
Tried to get it to work but the repeater will not show up as an extension. I have the same pbx as you show running the latest firmware 1.7 I thimk it was off of the grandstream site. I am using a rd982 running 6.005.004 which is current. Phone to phone no problem but no repeater lookup. Is there a feature licensing I need for repeater or ....
Hi, from Spain. Very Thanks for demo. How to assign sip extension to rd625 repeater? In the demo, the extension of the repeater is 21500. But where I have to assign the configuration of the repeater. Thank you very much. I hope more video demos Hytera configurations. Greetings from Spain.
Hi Joaquin, Configuration Steps as below: Step1: Upgrade the firmware of terminals and repeater to latest version R6.5, the firmware can be get from distributor; Step2: Configure the extension numbers and password for portable radios and groups in the PBX configuration panel, extension rules should follow the guide in the image; Download the image here: drive.google.com/file/d/0B8Dvct2GFASJZVBHTzVsVERlSWc/view?usp=sharing Step3: Start the CPS software and connect the repeater with computer, read the repeater's configuration and go to configuration directory : Conventional->Phone->Phone System->Phone Call, write all the group call ID and private call ID which will be registered to the PBX system. More configuration details please follow the Hytera DMR Conventional Series SIP phone gateway to Simultaneous calls application notes R2.0 document. (Download Hytera_DMR Conventional Series_SIP Phone Gateway to Simultaneous Calls_Application Notes_R2.0.pdf here: drive.google.com/file/d/0B8Dvct2GFASJQ3pFUlpzckU2TEE/view?usp=sharing) Notice: The configurations of RD98X/RD96X/RD62X are the same in SIP connection field.
Very excellent. Can you contact the owner of the content, please?
Is there a way to make this work on radios which have a DTMF keypad but don't seem to have a Telephone config option in the CPS?
ottimo
can we install GSM gateway to mack call
Can the SIP project be done WITH OUT smart dispatch? HYT wants three thousand US for smart dispatch.
Did you ever manage to get this to work?
Hi anybody can help me hytera PD 788 cps jamalsaid092@gmail.com
Has anyone gotten this to work with the latest firmware? Both repeater and UCM?
Bill Holesworth No
I had to roll back firmware on the ucm. Got it working.
which version you used in UCM ? and what version in RD ? i've RD985
Bill Holesworth: do you have contacts ?
i will check my notes on versions and get back with you. Was a few months ago I set up a multi site sip system up. But I have all my notes.
I done the setup like you said, but it not working. What I need to do at the phone Call list ?
Rudolph Britz Same probelm
I made it work. I will give you the info for what I done.
@@stoneice100 Can you share how you got this to work?
Good afternoon, can I call the PD 565, and be caused by SIP protocol?
Awesome ! Works for us in digital mode. In mix-mode we didn´t quite got it. (We us FreePBX running on a Raspberry Pi to handle Radio IP-clients only sitting on the very same LAN as the repeater).
Got this to work one way only, the radio can call the phone but not the other way around. The repeater seems unresponsive... Any tips?
Tried to get it to work but the repeater will not show up as an extension. I have the same pbx as you show running the latest firmware 1.7 I thimk it was off of the grandstream site. I am using a rd982 running 6.005.004 which is current. Phone to phone no problem but no repeater lookup. Is there a feature licensing I need for repeater or ....
Hello Bill Horchak, you need firmware lasted, is version v6.5 no the 6.005.004.
Please. Can you send me codeplug or configure the repeater and walky?. Please. Very thanks. My email is quini7620@gmail.com
Please. Can send me archive codeplug the repeater and radio? Please.
Very Thanks.
Hi, from Spain. Very Thanks for demo. How to assign sip extension to rd625 repeater? In the demo, the extension of the repeater is 21500. But where I have to assign the configuration of the repeater. Thank you very much. I hope more video demos Hytera configurations. Greetings from Spain.
Hi Joaquin, Configuration Steps as below: Step1: Upgrade the firmware of terminals and repeater to latest version R6.5, the firmware can be get from distributor; Step2: Configure the extension numbers and password for portable radios and groups in the PBX configuration panel, extension rules should follow the guide in the image; Download the image here: drive.google.com/file/d/0B8Dvct2GFASJZVBHTzVsVERlSWc/view?usp=sharing Step3: Start the CPS software and connect the repeater with computer, read the repeater's configuration and go to configuration directory : Conventional->Phone->Phone System->Phone Call, write all the group call ID and private call ID which will be registered to the PBX system. More configuration details please follow the Hytera DMR Conventional Series SIP phone gateway to Simultaneous calls application notes R2.0 document. (Download Hytera_DMR Conventional Series_SIP Phone Gateway to Simultaneous Calls_Application Notes_R2.0.pdf here: drive.google.com/file/d/0B8Dvct2GFASJQ3pFUlpzckU2TEE/view?usp=sharing) Notice: The configurations of RD98X/RD96X/RD62X are the same in SIP connection field.