วีดีโอ

Thanks for making this video. Cheers!

From my thinking...if utilising 2 NICs i would prefer they are not on the same network in the first place this can cause Spanning tree loops and euin all network traffic. Instead i would prefer if considering segregation plug each NIC into a vlan capable Switch, and then "virtually" separating Dante and NDI/internet/other traffic that way. Having a seperate set of IP ranges and appropriate Layer 3 routing will alao allow you to control traffic across both VLAN segments, including blocking of specific ports if required. I avoid windows firewall at all costs and do in hardware (or prodominately in Virtual Sophos XG router sppliances actually...) You have definitely given me food for thought on using the Dual NICs in our vmix streamers though, because some testing tonight was getting a lot of poor audio and clicks and pops like you said...Not sure if it was NDI as we disabled that already...but could well have been any other network traffic, so gives a strong point for using seperate NICs for Dante regardless!

Thank you, boss. Can I use this setup to input any livestream software audio into vmix?

Hi!!! Thanks for your videos, they are really useful. I work in a chroma key room and I have this silly doubt about how inserting a PPT in vMix if the PPT has green colors. The green of the CI style of the PPT is very similar to the chroma background, so the colors of the PPT disappear. Thanks in advance!!!

Castr is mandatory? there is no connections directly between LiveSolo Pro and vMix or OBS knowing that both has enoceder and decoder for RPTM and SRT? please

Please do more of these. They are so good.

Thanks a lot!!!

tu peux faire pareil avec youtube

How did you setup your D300 to accept an rtmp stream from Castr?

how may switches are you using?

It is very primitive example. Could you explain how to send ANY shortcut from master vMix to slave vMix ? For example I press "A" shortcut on master PC, how to say this to slave vMix?

Can you connect to OBS too?

Amazing. Thank you..This is what i was looking for

Thanks, very useful videos. The one thing I cannot work out is how do you manage to get 8 NDI feeds out of vMix? I thought the limit was 4 NDI outputs?

I'm looking on the Castra website and I can't see which account you need to achieve RTMP Pulldown? Can you advise please?

Just found your video. Great job! I would like for you to expand on latency.

mark

Great video!! Thank you so much for the information 🙂 Can we add the Castr link into OBS? I don't understand the message below

Oi família eu sou um dantes

Oi amigos eu sou um dantes

Can a vmix caller use a Atem mini extreme macbook combo as opposed to the webcam on the laptop? I'm having frame rate problems with them. Their frame rate drops from 30-15fps but works perfectly if i have them unplug the atem and just use their crummy webcam. Can any one help?

Well, I’m gonna have to watch that about 3 more times to fully grasp everything. Great amount of info in there. Thanks much for all the laying out so much in a very short amount of time!

Olá, me ajudem na aquisicao de um material basico para lives alguem pode me ajudar?

Hi Jon! Excellent walk-thru!! I have a question regarding the return path out of the X32 and back to vMix using Buses E-G. You have eight callers and their paths out of vMix were: Caller 1 (A,L), Caller 2 (A,R) ... Caller 8 (D,R). On the return path for the Mix- you used only Bus E (Host, Caller 1), Bus F (Caller 2) and Bus G (Caller3). However, would you configure Buses E-G exactly like you did A-D? For example, Host-Caller 1 (E,L), Caller 2 (E,R), Caller 3 (F, L) ... Caller 8 (G,R)? Is my reasoning/logic correct if I have eight callers for a vMix show?

Thanks for the tutorial. Could the same be achieved on a switch level without messing with the Firewall? Some switch like Netgear AV line M4250 have some presets so that you can tell each port what kind of signal to expect (NDI, Dante, etc). Thanks for your valuable tips!

Is this usable for IRL streaming?

Can't tell you how useful this video has been! I've been scratching my head over this for weeks!

also, just a few mins back, I achieved switching the scene in obs with vmix on another pc, using the obs midi plugin along with the rtp midi , as you have revealed, thanks so much.

Hi Jon, I know this is an old video, but I just need to ask. Are you able to get a stereo program feed from the express up mini, or is it restricted to dual mono? Just ordered one, but in doubt if I can stereo monitor my program with it. 🤔 Love your setup and videos - it’s been to much inspiration! 👍🏻😊

Nice work

I don’t understand you

Hi, is that a Beyerdynamic headset you are using? Is it dynamic or condenser mic? Best regards,

Can't configure or midi doesn't respond to other machine though connected

How do I input desktop audio when VB cables cannot connect to spotify or to youtube? (let's say I want to stream with youtube video's playing in the background. Easy enough to get the video through desktop capture, but how do I get the audio?).

Out of interest, what make/model USB modems are you using? I've been using Huawei E3372, but found that O2 sims will not work, whereas Three & EE worked straight off. I put the same O2 sims in my phone and got full bars and fast speeds. Anyone else encountered this anomaly? I use this particular Huawei modem as it has 2 x mini antenna connectors (concealed in the side), which means I can use a Poynting 4G Omni LTE Antenna.

The problem with the Pull link is that it is very flakey. You need a solid signal. If you are in a poor signal area it will die very easily. What I do is stream to Castr and then out to Twitch. Then I bring Twitch in to vMix as a browser source. The delay is more obviously but it's actually far more reliable.

Surely it's pronounced Caster not Castra. As in broadcaster.

Great video - has given me some great ideas for the changes I need to make. Can you manage the ports on the Netgear switch from the DrayTek GUI?

Hi Jon, Thanks a lot for the video. What you do if you have 3 slidedecks and 3 speakers on different locations who wanna click their own slidedeck?

@Streamingtech - Could you please talk about your routing. I cannot seem to get the audio from the mix bus to the vMix input. Every caller input and VT input has audio and is working in the mixer. On my X-32, I have the user inputs on card, Inputs on card, and outputs both user and outputs on card. Where should they be routed? Also, the vMix audio outputs; Master Output I have selected as my local speaker in my monitor. I also had 15+16 and got no sound. I had to change that to 1+2 to get anything out. Does that mean I'm listening to the Dante channels 1+2? That's A left and right as I understand your video. I'm almost there with my audio routing, but need a nudge apparently. Thanks in advance.

Thanks for the awesome videos, very helpful

I have problem with Dante when it’s output to a zoom session, the sound will become buzzing sound after awhile

Can this system be use to overlays on different system?

Base on this video is your SRT cable link to a switcher or is it to a camera

audio is not exclusively used in windows

Hello Jon, great video. One question: what is the name of the intercom software you showed in the end of the video?

I think now you can select the Preferred NIC in NDI 5, the Acceess Manager provide this new feature in its Advanced settings.

John love your videos, please keep at it ! Also is it possible to use the X32 as a control surface (I know you use x32 rack which is not the same) to send MIDI commands over Ethernet using RTP-MIDI. I have tried this and can not connect RTP to the x32.

Thank you for this!

Have you tried with multiple solos simultaneous? I am thinking about it to do REMI and I wonder if anyone tried it. My guess is even if it has some delay it wouldn´t be that much would it?