- 63
- 54 729
KAWASAKI MAD MAN
United States
เข้าร่วมเมื่อ 14 ม.ค. 2013
Videos of the evolution of a 2019 ZX 10 R from beginning stages all the way up to the finished product all the things it takes to drag race motorcycles and all the mistakes along the way
วีดีโอ
Radiator installed and new overflow reservoir
มุมมอง 28หลายเดือนก่อน
Radiator installed and new overflow reservoir
Transmissions in and inspecting clutches
มุมมอง 42หลายเดือนก่อน
Transmissions in and inspecting clutches
The difference between ZX 10 2018 and 2019 heads and transmission
มุมมอง 56หลายเดือนก่อน
The difference between ZX 10 2018 and 2019 heads and transmission
Quick tip on buying a lowered bike or lowering your bike
มุมมอง 2933 หลายเดือนก่อน
Quick tip on buying a lowered bike or lowering your bike
Final touches on the wiring harness for the ZX 10 Drag Bike
มุมมอง 1803 หลายเดือนก่อน
Final touches on the wiring harness for the ZX 10 Drag Bike
ZX 10 Drag Bike #dragracing #ninjazx10rlover
มุมมอง 1274 หลายเดือนก่อน
ZX 10 Drag Bike #dragracing #ninjazx10rlover
ZX 10 new fairings, nitrous and a radiator delete coming soon
มุมมอง 3906 หลายเดือนก่อน
ZX 10 new fairings, nitrous and a radiator delete coming soon
DME low pro oil pan installation ZX10R
มุมมอง 3956 หลายเดือนก่อน
DME low pro oil pan installation ZX10R
Carbon fiber, Hayabusa front fender, mounted on a ZX10R
มุมมอง 3727 หลายเดือนก่อน
Carbon fiber, Hayabusa front fender, mounted on a ZX10R
Kawasaki, ZX 10 R Drag Bike / street bike walk around
มุมมอง 11K8 หลายเดือนก่อน
Kawasaki, ZX 10 R Drag Bike / street bike walk around
ZX 10 R Strickland performance grudge tank review
มุมมอง 5318 หลายเดือนก่อน
ZX 10 R Strickland performance grudge tank review
ZX 10 versus Brand new Hayabusa with cam and head work
มุมมอง 9938 หลายเดือนก่อน
ZX 10 versus Brand new Hayabusa with cam and head work
Does Kawasaki just paint the forks gold where they're visible? Lol
Bro so fire
Bro them bad girls are sweet!!!!
Thanks bud
Are these from the 17+ gssxr or off a gen 5? The brake upgrade.
Looks good
💪
Hell yea sounds good!
Bro, I love the way that you did that that’s using the old KISS method 👊🏻
Can't wait to hear it run, you should do a first start viedo!
I also have a 19
Almost there bud ,looking good,spun a bearing last year and it was a mess,new rods and crank
Man , I hate you spun a bearing . Honestly I hope you do this… that DME oil pan , has a lot of O-rings in it , even ones you can’t see.. Those engines are really hard to mess up. They’re damn near bulletproof nowadays.. especially stock motor.. I would check of those O-rings in the oil pan to make sure you’re getting the right amount of suction .. if that bottom end is starving for oil , you’re gonna have the same issue with the new motor.. I would take that oil pan off, make sure all your O-rings are sealing .. I know this for a fact because Ricky Gadson toasted one of his engines because of that oil pan… I have the same oil pan and I made sure that it’s functioning properly.. good luck & Hope you found the issue. 🤘🏻😎🤘🏻
Yeah bro, I checked all the O-rings and made sure everything seated properly especially after I pulled the transmission out. I could look inside there and check everything. Seems like everything‘s good,I think I had some debris from my clutch or something like that block an oil passage, Because when I pulled my clutch out, it was smoked. I think it’s my own fault for not servicing my engine more. I was servicing it like if I was riding it on the road but now I know that when you’re dragracing, you have to service the engine three times as much as you normally would so from now on when I go to the track every two times I go to the track. I’m gonna drain my oil and check my clutch and also I bought an aftermarket oil filter that I’ll show a video later but thank you so much for your comments. I appreciate your input.
My man rocking the drag bike 🤑🤑
Where is that rag You were talking about to keep shit from falling in the engine 😆
Yeah, I didn’t use the rag. I just was really careful, I live life dangerously.😅
Does that radiator directly bolt up?
God dayumnn that's insane!! What tune are you on though?
What tune do you have?
Do you dump the clutch or slip it ?
Dude less talking more rev limiter
@@bmxpro273 🤣🤘🏻 agreed
Bro let’s hear it run! 👊🏻
Lmfaoo same
I like this guy. I could have a few beers with him and kick it in the back yard
Great tip man. Thank you. 🙏🏽
Finally someone else talking about this ! Good pick up man 🤘🏼
Point it up for more downforce 🤣
Красавчик
Sick video!!!!keep them coming
Yea got a lot less room than a car so you gotta be good with placement of stuff. Looks amazing bro
Looking good man!! The hard work is paying off! Keep up the good work
A big bore & port & polish on the head will give you truly what your looking for 💪🏾💪🏾💪🏾💯. Try a 44 tooth sprocket, it worked well on my ZX10
Whats the launch control that you have ? you seem to be launching with WOT !!
It’s an MSD launch master, you can set it at whatever RPM you’d like and then whenever you let out the clutch, it goes back to normal
@@KAWIMADMAN amazing!! But won't we flip out? Can we have the WOT and just work on the clutch release?
@@KAWIMADMAN Crazy What gearing are you running though? -2 +5? Coz I hear the bike go through 1/4 through all gears!
Where did you get those clips
dude sick build i love it!
That zx sounds good
Thanks
how long is the arm 12 over
You dry block now ? 😬
Dme
DME swing arm
Yessir💚💚💚
👍 "promosm"
Rob keep the awesome content coming brother
how long is swingarm
Hey what's up I'm kinda wanting to do a build a I would love to talk and see what ideas u have in making a 8s bike
Who won 🤷🏾♀️
What swingarm is that?
Lees performance in Charlotte is a excellent tuner. He's very under rated but extremely good 👌🏾👍🏾
How far is it stretched ?
Too far!
How to cut radiator delete
The Gen 5 are more comfortable than the Gen 6 model!
Love the seat. Who did it? And where did you get shifter buttons
I did defeat myself, but I got the pan from Schnitz racing and I also got the buttons from Schnitz racing
Radiator delete ? You’re gonna run a dry block ? I have a cut radiator & mine will get warm pretty quick , be cautious with a dry block.. the heat has nowhere to transfer to .. the temperature is liable to spike really quick..