- 19
- 23 207
The Quadstop Adventures
เข้าร่วมเมื่อ 12 มี.ค. 2022
This channel is about the building, maintaining, and restoring Off-Road vehicles of all types. I'll give you some tips and tricks along the way, and maybe bring you to a race or two, and throw in some trail rides.
HOW TO: INSTALLING OIL COOLER FAN KIT TRX400EX ; Lower your engine temps!
Today we install the MaxCool oil cooler fan kit by Jay Epperly for the Desert Conversion on our 2002 Honda TRX400ex. This is one of the best ways to lower oil temps and keep your clutch and internals operating properly.
Switch is available here:
www.rockymountainatvmc.com/parts/tusk-universal-handlebar-rocker-switches-p
Fan kit available here:
m. 1780786693/
Switch is available here:
www.rockymountainatvmc.com/parts/tusk-universal-handlebar-rocker-switches-p
Fan kit available here:
m. 1780786693/
มุมมอง: 701
วีดีโอ
PROJECT RAPTOR FINISHED!!!! Bonus sneak peek at the next project too!
มุมมอง 1.7K2 ปีที่แล้ว
So we finally get Project Raptor finished up after a bunch of setbacks and delays. 2002 Yamaha Raptor 660R 686 big bore Carrillo 12:1 piston Monster Pipe dual exhaust Port and Polish cylinder head Titanium Cylinder and Head studs Hot Cams Stage 2 35mm Keihn FCR dual carbs Alba Beadlock wheels SunF 21x7-10 front 20x11-9 rear Elka tuned suspension American Star 2 up1 heim joint a-arms YFZ450 Dual...
OOOPS!! WE DID IT AGAIN
มุมมอง 8702 ปีที่แล้ว
The subscriber that bought the Dumpster Fire TTR wants us to build him a quad, so we found the worst one in Florida..... ROUND 2!!
DUMPSTER FIRE TTR....Worse than we thought
มุมมอง 562 ปีที่แล้ว
As we delve into the TTR we discover that sometimes you should just say no.... We uncovered major engine issues and more. Special shout out to RTR Wheel Lacing in Lutz, Fl for coming in clutch with some custom made spokes. rtrwheellacing.com
Yamaha TTR125 DUMPSTER FIRE....Can we save it??
มุมมอง 1032 ปีที่แล้ว
We have a new project in the shop. This is a 2006 Yamaha TTR125LE that was a theft recovery. This is absolutely one of the WORST bikes I've ever seen. Let's see if we can make something out of nothing. Join us on this journey of insanity......
Project 300ex is COMPLETE!!!
มุมมอง 8K2 ปีที่แล้ว
We finally finish up our project 300ex that we bought from one of our subscribers. It came out super clean and is ready to make someone very happy. It's ready for the trails!! Parts list: All OEM parts - www.rockymountainatvmc.com Clutch - www.rockymountainatvmc.com/parts/tusk-competition-clutch-kit-p?s=1197240 Graphics - www.brmoffroad.com Handguards - amzn.to/3ORX1q6 Safety Tether - www.rocky...
Cleaning up the wheels on Project 300ex
มุมมอง 5222 ปีที่แล้ว
Today we get the wheels cleaned up and we install our handguards.
Part 2 of Memorial Day 2022 trail ride
มุมมอง 952 ปีที่แล้ว
This is a part 2 to our Memorial day ride. I do not own the rights to the music in this video Opening song Artist: Bentvalve Song title: Feel Nothing Remaining music th-cam.com/video/9EYati7Zs9A/w-d-xo.html
2022 Memorial Day trail ride on a 400ex LTZ400.. Part 1
มุมมอง 2092 ปีที่แล้ว
We head out to our favorite trails on my friend's property we call "Camp Charnisky". This is part 1 group ride and part 2 will be some solo LTZ400 and 400ex footage.
Installing Strong-Made Floorboards on our Fourtrax300
มุมมอง 1.5K2 ปีที่แล้ว
We install some new Strong-Made floorboards on our 1999 Honda Fourtrax300 4X4 and have a story about how I acquired it. strongmade.com/5008-floorboard-for-honda-fourtrax-300-strong-made.html
WIFE'S SECRET SPOT EXPOSED..... on her TRX250ex
มุมมอง 1162 ปีที่แล้ว
Mounted a Go-Pro on the wife's helmet and she shows me her secret riding spots on an old golf course by our house. She's riding a 2007 Honda TRX250ex
DON'T BUY NEW A-ARMS......Until you see this
มุมมอง 7652 ปีที่แล้ว
Bad unserviceable lower ball-joints got you looking for new lower arms? Don't trash your old ones just yet. We show you how to convert to Heim Joints on a TRX300ex. (will work on 400ex as well)
TIGHTEN OR REPLACE YOUR OLD ATV OR DIRTBIKE SEATCOVER
มุมมอง 1522 ปีที่แล้ว
We show you how to tighten or replace your ATV or Dirtbike seat cover
300ex project build we bought from a subscriber. Let's do a budget Hare Scramble Quad!!!
มุมมอง 4.9K2 ปีที่แล้ว
We picked up this 1994 Honda 300ex from a subscriber. Let's try to do a budget minded entry level quad that can be used on trails and a few Hare Scramble races in the FTR (Florida Trail Riders)series.
How to assemble Hinson clutch basket for a Raptor 660
มุมมอง 1.3K2 ปีที่แล้ว
Been getting some messages on how to install the gears on a Hinson clutch basket. Come along as I show you how to do it. hinsonracing.com/p13691-billetproof-clutch-basket-2002-yfm660r-raptor
The Project Raptor 660 gets the arms and hubs installed!
มุมมอง 1.3K2 ปีที่แล้ว
The Project Raptor 660 gets the arms and hubs installed!
Beautiful brother
Hey what’s the size of the fuse holder for this kit?
Cool info
how many degrees of heat does it drop?
That 660's a beaut! Are them shocks and a-arms standard or long travel?
Did you need to cut the plastic heat shield?
I just installed them on my 300 that little bolt is a b**** but you just have to put the nut in a ratchet wrench and wrench it one while holding the front of the bolt. 🤙 So much better than stock foot rest.
Hey what did you do with the rear shock? Im 170 and when I sit on my 300 I feel like im scraping the floor. Think I may need an aftermarket spring
Idk why I clicked on this but I'm glad I did. I think this is a really good looking build
I have the 2x4 version of the exact same bike...it has Strong Mades on it from when it was new... one drawback is the little hole the shifter is in...hard to get my foot under it...rear brake is no problem, it's always being pressed down, but the shifter is pulled up as often as it's pushed down, so I made a jockey shifter for mine... problem eliminated...
Very pretty. Make sure to check the weather report so you don't get it dirty.
How Much did all of the stuff cost total
Where did u get those pegs covers or gaurds
Underneath the cone washer, there is another flat washer. This is the second video I've seen that didn't use the second washer. I'm not sure if it makes a difference, but it was designed that way for a reason. You can see it in the video. When I took mine apart, all of the old oil was making it stick to the basket, and I used a pick to get it off. If it's designed to have two washers, then I would use them both.
Just how loud is that tap from the engine,
where can you buy these floor boards
Website in the description... I also have these, they're great...& tough...
Hey did the levers and all work with the 1 1/8 bars okay i wanna get those but i dont see levers that size?
Hey, yeah the levers work with 1 1/8 bars. Most bars taper down to 7/8 at the controls
I just bought this quad a couple months back off marketplace!
We had a lot of fun building it for sure!
Amazing happy I found this page!
What is the torque specs on those bolts?
88-90 fp 0r 120 nm
where did the shifter come from?
Link is in the description
What did this sell for?
$2300
Good stuff bro got my own 300ex I need to fix ball joints on for my son. Thanks and keep the videos comming my dude.
Those grinders with no throttle and no shield scare me more than Someone pointing a gun to my head. One time the disc broke and hit my in my eye socket, luckily I had safety glasses on. If it woulda hit my neck or something that could’ve been bad
Just subscribed.
TY for the sub! More content coming soon. Trying to prep for a long distance move.
Very nicely done sir and it's absolutely a beautiful quad!! What yr is this and what kind of motor work did you do btw? Thanks for posting👍
It's a 1994. Previous owner did a 330 big bore kit so we left most of it as it was. We did end up having to replace the cam, timing chain, and rocker assemblies
That's Jay Epperlys kit, I know his kits by heart
Hands down, the best add-on mod you can do to a 400ex or any air cooled ATV for that matter.
@@thequadstop8873 yep, they are the best
Where can you buy this kit ?
I love your content as a atv tech my self. You don't edit everything out like alot of atv youtubers. Your very helpful to those that don't have knowledge about quads but want to work on them
We all screw stuff up and I think it's important to show the bad stuff too. Always remember, there's nothing that can't be fixed. Don't be afraid to jump into a repair.
Awesome job. If I rode quads, I would try to buy it. How's the ttr coming along?
The TTR is finished and I should have a video up soon
Looks bad ass bro! Glad your back in the swing of it! You do great work!
Awsome job man
Any updates for the Honda build?
yessir, video coming soon. Just had surgery so editing is slower than normal
i love the vids keep up the great work you should do a 2001 yamaha blaster build next thats what i got
We may be able to make that happen once we get moved out to Arizona
Man I hear that I pretty much am rebuilding the entire quad I just bought two weeks ago.. not completely thrilled on it but it is what it is.. also it had some damage like there's some casting repairs I have to make from someone using too long of bolts in the head and it blew the bottom casting out under the head. Also the entire harness was hacked to hell and I sorted that out but I ran into issues with the reverse inhibitor unit which is the smaller box that looks like the cdi some people call it a rev box but it wasn't completing the ground circuit internally so I had to make some adjustments to complet the circuit but I don't have any of the parts to use the reverse anyways so hopefully that only is for the rpm limiter for using reverse. But I can't wait to watch the rest of these videos keep them coming.
I go into all of these as if I am going to have to rebuild the entire thing. Sometimes you win but, more times than not, it ends up being a ton of work. You can bypass the RIB by grounding the circuit. You can still get the reverse parts on ebay for a decent price. I have a cable mod you can do that eliminates the lockout cable so you can run aftermarket clutch perch.
@@thequadstop8873 ya thats what I did was just grounding out that circuit for now.. I ordered a new harness and a key switch for it so that way I'll have a safety protocol from my kids but the wife wants me to add another fail safe that we use to do when we lived back in Florida but on our cars and motorcycles.
what size lightbar is that?
I believe it's 6.5". It was on there when we originally got the quad.
I got a 92 250x nice
Those are great quads. Identical to the 300ex except the electric start.
ive heard so much people saying that this wasnt possible.. next time ill send a link to this😅 great vid!
It takes a little work but, it is worth it in the end.
Amazing video💪🏼
Thank you 🙌
I saw the turd raptor, lol 😆 😂 🤣
What's the part number for these joints? And did you do the upper arms?
They are 3/4 heim joints from American Star Racing. They don't list a part# but if you call them they can get them to you. I only did the lower arms. amstarmanufacturing.com/
You will also need to get the vertical pins to attach them to the spindle. They have those as well
Ok thank you
Love the video, video looks way worse than the pics did
oh man, this thing was a pile..... update vid coming soon
Where in florida
New Port Richey area
Can't wait to see it complete! Your definitely the right guy for the job!!
Cool bike project
It should be a fun one
Good luck
might need some miracles too! lol
Great video.
Thanks, we’ve got more coming so stay tuned!
Beautiful bike man! Can’t wait to see it ripping through some trials!
Thanks man. It should be a great quad for someone.
THE RAPTORRRRRRr
Looks Great!
I need help with my bikes and I live like 10 mins from you
i think it was you that needed a shock right?
I sent you a message
Yes
@@patrickwhite3703 I have sent you 3 messages and no reply. I'm happy to help but I need you to communicate with me.