วีดีโอ

when the test is finished it returns to its original state

2mm have a nice day

what information do you want for this model

Be always happy

hello check ntc and heater element

spread it I have many models

Be always happy

@@specialrepair I have other function HTE ITE and other in this dishwasher. Pleas.

The error code relates to a freezer fan issue, it is either faulty or obstructed by debris or ice

www.beko.co.uk/support/manuals

press the temp button and try other buttons, it's not the same on all models

Put grease on the springs

you will have to measure the dimensions of the door with the tape measure

thanks i wish a good day

do the test you see in the video

all good

if you need more technical help I have the technical book. in this book you will find a lot of information. if you want it, I am selling it, send an email for the price

ok

thanks too

change function

I don't understand the question

ΝΟ it's inside the door,follow the road that goes

​@@specialrepairDo I have to remove the door to get to the black wire?

@@Kiminoriumit's inside the door

how can I help you

@@specialrepair I am trying to sort out a machine for a customer she said it was only spinning for about a minute then stopping. I went to test it and ran it for at least 10 min with a wet dish towel in it. She says it is doing the same thing again. Any ideas?

@@paulb9769 if you want I can send it to you service manual for 10 euros You want it has all the information you want

I did not understand the question the test checks the peripherals accessories

if you want I can send it to you service manual for 10 euros .he will help you if you want

send an email to talk I got it service manual

thanks become a subscriber

check all sensor temperature

yes

You should take the test ,if the code continues to appear there will also be damage to the board

@@specialrepair Is it possible to enter service mode and activate the defroster manually? So I could see if it turns it on.

@@selimguclu625 YES

Do you have any instructions? Or manual for the key combinations? Thank you for the fast reply Sir.

@@selimguclu625 YES

what are you doing wrong? do what the video says

@@specialrepair I did the same steps as in the video but the homewiz network does not appear on my phone

@@abdesign24 there have been some problems with the connection in practice try downloading it again

@@specialrepair thank you for your help

@@abdesign24 😊😊

When you say it doesn't work,does not light or turned on and does not display the graphics on the screen

if the icemaker sticks check if ice has fallen,time does not change,check the water pressure,it can be in the back where it fills with water icemaker to have frozen

@@specialrepair I opened up the service mode. I can turn both trays. Manually. I also can manually fill both trays through service mode. I took the ice machine out and tested the 2 fans on back side of each tray and with a battery. They are working. I plugged it back in. But dang. The fridge is just not telling it to fill and make ice. Overnight I had like 12 small pieces of ice. In tray so it made a little. Suppose to be 11lbs in 24 hours. I checked the trays with finger. One has some water. Other had no water. And I was in there for 2 hours drinking coffee. It never dumped.

@@4rdzllayou will need to change the water valve, you have to check the rubber from the valve until the icemaker many times it gets clogged with dirt and gravel,the fans all work in the test

Hi. my ice maker unit makes ice but it suddenly doesn't turn to throw them down. so it fill it again with water making leak in fridge. do you know any way to reset or maybe force it to turn? thanks

Can I ask a simple question for u. My beko fridge/freezer. Freezer on bottom. Has settings like -9,-8,-7,-6,-5,-4,-3,-2,-1,0, 1, 3, 5. I had it on 3 thinking it wouldnt be as cold as 0. But even my ice cream is rock hard. Temp is maxed out with my thermometer at -20+. Am I going backwards meaning 3,5 is even colder? Should I go to maybe -1???

yes

YES