วีดีโอ

@@jeromequequesah3800 they really are game changers for broken bolts and studs! Anything that’s flush or even under the surface level, G-FORS extractors are your best fighting chance to get it out 💪

Dan has always been with Grip Tooling Technology. Before the launch of GripEdge Tools in March 2023, he helped get the word out on the RBRT line we manufacture. Since the launch of GripEdge, he has switched his focus to our in-house line of tools!

@gripedgetools oh ok

They were at SEMA...for real!

Very legit! You can check out the sets here: www.gripedgetools.com/collections/extractors-socket-extractors Professional grade, shipped fast and free straight to your door, and backed by a Lifetime Warranty 💪

We were! Always a great show at SEMA

We appreciate it! 💪💪

@gripedgetools I need me a set if these! Everytime I use another brand it goes back asswards 😅🙌

This set is $650 just for the bit sockets. If it had ratchets and sockets you’ll be hitting $2500 I’m all set. I can find equally effective extraction but sockets from ares and craftsman and save like 2k these tool companies are being ridiculous with their profit expense. This can’t cost more than $40 to make

We are launching a 3/4" drive impact hex set very soon that goes up to 1” SAE and 24mm Metric sizes. We JUST got them in stock but they are not live on the site yet. We can create a custom order for you if needed until they officially launch next month. You can send us a message on any of our social media accounts or email/ call us to speak with a team member. You'll find that info here ➡ www.gripedgetools.com/pages/contact

Absolutely! Ordering directly from GripEdgeTools.com gives you the same lifetime warranty a tool truck would and we also ship FREE on orders in the US over $99. You can find the sets shown in this video here www.gripedgetools.com/collections/new-releases

We have the T70 available now as an individual but it will be included in our Master RPT STAR (Torx) set that's expected to be released in Decemeber.

We appreciate you checking in with us and seeing the latest line of tools!

Got word from the team that they are in the works so we will have them! No set timeline just yet but stay tuned for more updates as we continue to grow the product line.

Our bits are made from premium S2 Steel and are backed by a lifetime warranty! If any of them become damaged, we'll get the replacement set directly to your door, free of charge. RPT, Rounding Prevention Technology, allows for up to 50% more torque on a new/ good fastener. This should help greatly for your circumstance! RPT pulls the material of the fastener inward, preventing it from stripping out. Our socket extractors could also work in your situation. They are straight-cut and are hammered on. This means they get grip even on button heads like you mentioned. Bi-directional too so you can work it back and forth. Check out our RPT HEX line here ➡ shorturl.at/vkaWR GripEdge Extractors ➡ shorturl.at/94B2u

They are in the works! Both ball end and straight. We don't have an official timeline for them yet, but they are coming soon!

@@gripedgetoolsespecially long arm ones.

Thanks for the feedback! Triple square can currently be found in our 132 pc bit set (➡️ rb.gy/68y06f) but we will also be releasing the standalone triple square sets in the future. Many more product releases are coming soon 💪

Sorry for the delay but yes! Our RPT Hex bit sockets come in 1/4" drive sizes. $89.99-99.99 for the short chrome sets. Professional grade, complete hex tool replacements, and backed by a lifetime warranty. You can check our the hex sets here: www.gripedgetools.com/collections/hand-drive-sockets-hex-bit-sockets?

These are the makers of them. MAC had the exclusive rights to sell them for a few years and now that deal is over.

@@ryanle1293 Currently that set is carried on the Cornwell trucks! We have a lot of sets and variations coming to GripEdgeTools.com over the next month or two. Stay tuned. We’ll be sure to post all of the new product launch videos, sets, and what’s included here on TH-cam as well as other social media channels

3/8* 😭🤦‍♂️

That was a user video submitted by @3seriesgarage we paid exactly $0 for it. The standard hex had a lot of wiggle room and with a stuck, heat-cycled, or rusted fastener, it's not worth the risk of rounding it out. RPT Hex are complete replacements for your traditional Hex tools. 50% more torque on new and up to 400% more on stripped, damaged, or compromised.

At this time we do not have RPT Hex Sockets available but we have a full line of tools coming soon! 8 new sets over the next few months and many more to follow. If you deal with a lot of stripped above-flush bolts, screws, and studs, we manufacture some excellent one-of-a-kind RPT Socket Extractors. You can check those out here ➡shorturl.at/WJpqS

Well yes and no, they do VERY well at removing stripped hex bolts but they're actually made to stop hexs from stripping. They work perfectly for non-stripped, non-rusted hex bolts and help prevent rounding but they also work as extractors if it is rounded

RPT = Rounding Prevention Technology. Not only do they prevent the damage from happening on good/ new installs, you will also be able to use that same bit to remove stripped, rusted, and damaged Hex fasteners with up to 400% more torque. They are not oversized and are a 1 to 1 replacement for your standard hex sets to be used the first time and every time. We have lots of demos showing our RPT HEX removing stripped fasteners but you can check out one of our more recent videos with Loctite on Aluminum where the standard hex strips it and we use our bit to get it out. It's on Instagram ➡ shorturl.at/gVLQF

@Colby-yg7nj You're right! Prevent the damage from happening when used the first time and every time but also remove damage as well 💪

They could very likely work on smaller Phillips if it's really stripped but we also manufacture dedicated extractor tools! G-FORS - For Broken, flush, or sub-flush issues ➡shorturl.at/kQLkW Socket Extractors - For above flush, bolt, studs, button head ➡ shorturl.at/Gkz0d

@@deskonosido1026 GripEdgeTools always has something for everyone! 🤘🏻 go shop around their page, and don't let prices fool/scare you, these are 110% Lifeatime Warranty, impact grade, exc, they are a true value to a true mechanic 💪🏻🔧

🙌🙌🙌

Thanks for leaving a comment and inquiring. If you check out 02:50 in the video, the Loctite is peeling off the fastener as it's being removed so when you see the close-up shot, there is less there than when we first applied it to let it cure. Next time we will film the application of the Loctite to assist with clarity. Check out our playlist of RPT HEX videos to learn more ➡ th-cam.com/play/PLT3aVa8rHgN8JpNu80H8YWBiH7-bHxDT6.html&si=CG83I-X5zKht7knd We also have a similar video that shows the application of the Loctite that you can watch here Watch on Instagram shorturl.at/SaqV8 Watch on Facebook shorturl.at/xAY87

Hey George! We relayed the message and Dan said hi and appreciates you watching! He has many more videos coming soon.

We have a similar video showing that it CAN remove the stripped one as well! RPT Hex gets up to 400% more torque on a stripped/ damaged fastener vs traditional standard hex tools. Links to that video are below Watch on Instagram ➡ shorturl.at/SaqV8 Watch on Facebook ➡ shorturl.at/xAY87

@@gripedgetools thanks

The purpose of the demonstration was to show that even under extreme torque with a fastener LOCKED into place by a vise, it still won't strip it like the traditional hex did. In a real-world scenario, it likely would have come unthreaded long before snapping the head off. Grip it. Don't strip it. 💪

Unfortunately, the negative reviews are not typically the fault of the GFORS Extractors themselves. The drill bits that come with the set are actually left-hand thread, which means you can only use them in the reverse setting on your drill. If you try to use them in the forward setting, they won't work and you might mistakenly think they are "dull". The other factor is that they do not slip like most extractors do. Since they do not slip, it's assumed you can apply more and more torque until the fastener breaks free. However, this is not always the case. If the torque being applied exceeds the diameter of the extractor, it could eventually break. You will be able to feel it bending and flexing before it snaps. If you feel that, you will need to switch to the next size up and add heat, or use other measures to assist with the extraction. Hope that clears some things up! Feel free to reach out to chat via our website, Facebook, or Instagram message.

We have plenty more in the works! Stay tuned 😎

Vs a standard E-Torx socket. Where a standard will slip or cam out, the RPT E-Star (torx) will grip and remove without slipping and causing further damage. No extractor is needed in most cases. Prevents damage on new installs as well 💪