วีดีโอ

Hi @sbs7396, Thanks for reaching out! The Tracer 800 is a higher speed wing than the Plasma 880. With the shorter wingspan of medium aspect foils such as the Tracer, these are build for speed, whereas a high aspect foil like the Plasma is unmatched with glide. For high speed, we recommend the Arc down 160 or 180 Stabilizer.

Hey @KiteFoilFlyer, thanks for reaching out! The preferred foil by our kitefoil team is the Tracer v3 650 with a 98cm mast. The Tracer 800 is also really good for kitefoiling, but for stronger winds, the 650 is the way to go.

Hey @tsoltysiak, thanks for reaching out! The anti-twist for the center of the V strap is only needed if you're using it with a single screw. Because the board has double inserts, two screws are used for the center of the V strap, and no anti-twist is necessary as the two screws will keep the strap from twisting. We hope you enjoy your new Compact! 😁

Hey Simon, we have just released the Nomad v2 today! The Active Carbon version is definitely suitable for beginners, whereas the Carbon Plus version is for the more experienced rider due to its reduced width.

@@AKDurableSupplyCo ok thanks !! I’ll look into it. Is it larger than 23’’ for a 115L ?

Hi@@simonlootzak8320 , the dimensions of the 115L Nomad v2 Active Carbon is 7’2” x 22” x 5.7”. The v1 is slightly wider and will therefore be a bit more forgiving for a beginner. You can find more info on the Nomad here: www.akdurablesupplyco.com/hydrofoil/foilboards/nomad-foilboard/

Hey Ron, thanks for reaching out. Most of the shops should have already received stock of the new Monocoque stabilizers. These will be up on our website in the next couple days. The Monocoque is currently only available in a 200 tail with 31.5cm fuselage.

@@AKDurableSupplyCo Hi there people at AK! Another question on that monocoque stabelizer: I suppose that now the whole construction is "monocoque" the angle of the stablizer is no longer trimmable. At what angle have you fixed it? How does that compare with the trimmable angles of the 'old' solution of alu fuse + G10 stab. (What range of angles does that one have anyway?) Love to hear from you!

Hi@@RonKolijn, the Monocoque has a 1 degree angle of attack, so it's basically like trimming the stabilizer slightly back.

Hi Elizabeth, Zane is using a 70cm mast in the video, which is the length we would recommend starting with.

Hi @RonKolijn, thanks for reaching out! Mast positioning and stabilizer trimming is usually more personal preference. The general rule, the more forward the mast, the more lift, and when the fuselage is trimmed all the way back, the more lift. The Tracer performs really well in the surf! When you're on the wave and the diving has disappeared, have you noticed if you're still standing in the exact same position or have you possibly shifted your positioning on the board that may have taken the diving feeling away?

@@AKDurableSupplyCo I stand same position, just let go my rear hand of the wing handle when riding the wave For now I'll try putting the stabiliser all the way back on the fuselage, before my next session

@@AKDurableSupplyCo I'm just of the water and can share with you that it really helped out to move the stabeliser to the furthest back position. Thanks for your help!

Hey@@RonKolijn, glad we could help!

Hey @yarivdori7256, we are so glad you are enjoying your Tracers! We have just released our Monocoque stabilizer, which is a full carbon structurally integrated blended tail wing and fuselage.

Im loving my tracer v3 1030!

Hey@@haldanemartin3642, we are so happy to hear that!

Hey, thanks for reaching out. We are releasing a Tracer Overview video at the start of next month. Being a high-aspect foil, the smaller size Plasmas will have more glide than the Tracer, but this is at the expense of speed and manoeuvrability. Personally, I've been riding the 880 Plasma for the last couple months, and I've found that it has lots of glide and good efficiency when pumping, and because the Plasma 880 still has a wingspan similar to the Tracer 1030, it still turns exceptionally great.

Hey @KiteBud, he is using the new Plasma v2 880, 160 and a 36L Phazer. I'll ask Adriaan for his weight, and I'll get back to you.

Hi Alain, thanks for reaching out. Most people like to use a foil that is at least 1600 or bigger.

Plasma v2 1600 🙌

Hey @carolinavensius2469, thanks for reaching out! To find your nearest shop, please use our shop finder: www.akdurablesupplyco.com/shop-finder/ Alternatively, you can contact our sales team via the contact form, and they'll be able to follow up directly: www.akdurablesupplyco.com/contact-us/

Hi Mamba, thanks for reaching out! The Compact v3 has already been released in Germany. To find your nearest shop, please use our shop finder: www.akdurablesupplyco.com/shop-finder/ Alternatively, you can contact our sales team via the contact form, and they'll be able to follow up directly: www.akdurablesupplyco.com/contact-us/

Hi Mamba, thanks for reaching out! Yes, you can buy the Compact v3 in Germany. To find your nearest shop, please use our shop finder: www.akdurablesupplyco.com/shop-finder/ Alternatively, you can contact our sales team via the contact form, and they'll be able to follow up directly: www.akdurablesupplyco.com/contact-us/