วีดีโอ

In my lifetime, I've installed every shower surround material you can think of, including wood, arch panels, metal, glass, glass block, tile, rolled laminate, vinyl, PVC, and shiplap. But I've never installed them so poorly as this.

Have you ever pulled the safety bar back and shot it in the air?

You know that s**t is going to leak.

Amazing video sir. Thank you for running through it!

You’re supposed to do little circles to MAKE SUCTION SHARING THE WALL AND THE PANEL ( sorry idk why the caps lock turned on I didn’t want to delete it and retype lmao)

How does the suction power compare to the old version WD0139. I’ve had the older version and had fantastic suction power. I’ve used the Milwaukee cordless vacuum that’s the same style as the new Ridgid and I found the suction on that to be terrible. Just want to know if buying the new one is worth it

Did it hold up after time??

No fireblocking

brah, links??

I will be following this advice, cheers

My walls are squared but still have a gap on the edge , is that due to the 2x4 being crooked ?

Man after my own Heart .. Awesome Vid

Love rigid vacuums bought me 2 one for work and home corded

How much weight would you say a nonbearing wall can support? For example, if a client wants some heavy cabinets to be hung from the wall. If everyong is mounted into the studs, how many pounds can a nonbearing wall support?

I have the older style (the first one you showed). It was a complete waste of $. The motor is fine. It blows a lot of air but the compartment doesn’t seal so I get very little suction. It will pick up fine dust but anything with more mass just stays put. I just ordered the NXT one. I’m really hoping it’s much better

Jus think before you post

I love milwaukee tools but these guns suck. They break all the time. The ryobi gun is the same gun as the ridgid and cheaper.

"What do you guys want to do this weekend?" "I don't know...." "How about we go to home depot and spend $80 on a tool box, then beat the Sh*t out of it...." "Hold my Busch Lite..."

Jesus fuckin christ this is we todd did. Damn redenecks.

It's the only review I've seen with someone actually using it. I'm looking for 3-5day ice retention. I own tons of ridgid, and will probably buy this eventually. But it's Looking like the magellan 30qt is where its at.

It’s a new toy is why…lol

Men toys 😂

I own dewalt tools ,makita ,metabo,milwaukee they're all good but i love ridgid tools

Oh, by the way, the bags fit but don't work well cause there's not enough room to get around the filter.

I won't use a shop vac without a bag, so it's nice that this one accepts the bags. For my purposes, because the bag will catch so much, I would probably save some money with a the lower end filter if/when it comes time to replace the slightly more expensive blue one. Thankfully since you posted this, the came out with the Pro Gear attachment.

Hex-head washers not only look better, but you won't ruin the powdercoating around the holes of the bracket 😂

Suction cups are a great help.

Where you get this? The one i saw was corded

How many cans are needed? Need to do a 48 x 36.

Mid sand 4:1 mix spread it and forget it

I know about your company. TH-cam will help a lot in expanding your business as well as sales Can we do 2 min.. phone meeting?

I've been considering window and dior soray foam for a bed. You convinced me to give it a try. Even fiverglass bases are tough, if the floor is pretty smooth and flush with the base it probably would be fine with nothing. Ive demoed seceral that had nothing and were not cracked (this one had bothing and is cracked). Mortar sucks.....dry time, weight, mixing and clean up. Thanks

Tapcon sucks dont waste your time.

You forgot the hex head washer.

Massive thanks :-)

You must have hit mute about five minutes from the end because we couldn’t hear you.

You should've caulked the corners and base before setting your walls.

No double top plate?

Great job on this review. You set the best example of how a man can teach without using cuss words. Very professionally done. Thank you.

This is an absolute hack job. 😅😅😅

What happens when you need to get to plumbing?

treated lumber was used.its toward us and he slide it up. rest agree!

We just put an onyx surround in around a new tub. We have a bit of a gap in two spots near the front of the tub. How big a gap should we be comfortable putting color match caulk in? It's where the panel meets the top of the tub. Any other options trim wise to finish it off nicely? Waiting on 90 degree trim for the two back corners and thinking about putting a 2" x 3/8 inch flat trim at the top where it meets the ceiling. Also planning on using 3/8 in edge cap on the sides where the onyx meets the drywall to finish it off. Any thoughts appreciated!

There is an adapter for this to attach to the pro-gear boxes now

No stud on the right side of the window so far I noticed

My dude searching for good teeth on that blade sent me. 😂

But what did I purchase this expensive knife collection for then?! Giggles, mostly.

Lol And while it is useful to know this can be done in a pinch,... It is not the quickest, easiest or most effective and ONLY works with those kinds of bands. Meanwhile a knife or flooring knife works on all but metal banding. And snips work on all but the most pernicious of fiber cloth bandings. And either method is quicker than what is portrayed in the video.

What about the metal strap. Always b prepared.

it is sad how often i’ve had to teach this to new workers.