วีดีโอ

@@surajusuberu9297 Merry Christmas. I am not conversant with that. To my knowledge, every meter is paired with a specific keypad. You will have to visit the closest business hub of your Electricity Distribution Company for assistance.

@@omozgospel th-cam.com/video/buw9P5zJuJQ/w-d-xo.html

Oh. You would have to visit the closest office of your Electricity Distribution Company for assistance. All the best

@Sentang7 Do watch this video on how to change your prepaid meter keypad batteries because that is the main reason why the prepaid meter keypad can be blank... th-cam.com/video/UHHssBsXvvY/w-d-xo.html . If you do try this and it still doesn't work, I will advise you to visit the closest office of your Electricity Distribution Company for assistance.

Kindly watch this video ... th-cam.com/video/B8m5NyGy_-o/w-d-xo.html .If you still do not get a solution, do visit the closest office of your Electricity Distribution Company to lay your complaint.

@@rebeccaayegba glad to have been able to help.

@araromigbogboade2592 it usually says con error when there is no electricity. You have to wait for there to be electricity, you can confirm with your neighbours or if you have a house you normally use to check if there is electricity in the neighbourhood. You can also try to reload within sight of the meter itself. For Conlog meter, you do not need to press the # button but for some other Meters, you need to press the # or enter buttons

1. Check whether the units are displayed e.g 59.65kwh. 2. Check whether there is any strange/unusual error message on the keypad screen 3. Check that your changeover is on electricity and not genarator or solar. 4. Invite an electrician to take a look to rule out electrical malfunction in the house. 5. Visit your closest BEDC office to lay a complaint. Snap the keypad screen when there is electricity in your neighbourhood to have evidence of what's showing on it and go along with it. All the best.

@@victoryukeredi471 😄 kindly seek her cooperation on this as the kitchen is a woman's sacred place. Thanks for watching💜

@esomchiessence7910 not too familiar with Mojec prepaid meters but for the Conlog prepaid meters, you cannot use another keypad as each keypad is programmed to a specific meter. It's possible same is applicable to Mojec too. Best thing to do is to visit the closest business hub ie office of your Electricity Distribution Company for assistance either to repair the one you are currently using or to get a new one.

The meter and the keypad should already come paired. If you keep getting reject error msg and both can not connect, simply visit the nearest offices of your Electricity Distribution Company for assistance.

@@ivyludovic Thanks a lot. The keypad was disconnected by the landlord of the house.

@@femiabiodun4996 I spoke about this in the video. Follow my suggestions.

@divinefavourite817 you will have to visit the closest business hub ie office of your Electricity Distribution Company for assistance.

@Comfort_Fyanka @Comfort_Fyanka if its Conlog, try inputing either #100# or #4#. If it still doesn't work, you will have to visit the closest business hub ie office of your Electricity Distribution Company to lay your complaint and they will help you sort it out. Go with your keypad.

@succidogamingyt4311 go on google and type it in and it will show you their website and contact details. Just googled it and it showed up as www. Ikejaelectric. com

Thank you so much!! This means a lot💜

@amarachieze7589 Glad to have been of help. No I do not have one currently but will definitely look into the brand.

Thank you for the feedback 🤗. I anticipate further feedback 🤗

@@Glo-mary will definitely look into that.

@@Elromarvin kindly visit the closest business hub(office) of your Electricity Distribution Company for assistance. All the best.

@@disebomaine4299 kindly contact the closest business hub of your Electricity Distribution Company for assistance. All the best!!

@@meganfelix2583 what did they tell you exactly was the reason for their not being able to generate token for you? Invalid meter number? Pending charges?

@Heavypapa2 Glad to have been of help. Thank you sooo much too💜

How many minutes? You input all in quick succession as explained in the video. The first 20 digits kct 1 then the second 20 digits kct2 before inputing your 20 digits electricity token. I am not too certain on the expiration timeline of the kct codes so it's advisable to input them once you have them. All the best.

@@TinTin-c8x glad to have been of help💜

@PromiseChisom-jf6vl that very first prepping with lukewarm-hot water as described in the video is very important and is done only once before first use. Using hot water for first prepping spoils the flask. It won't last 2 weeks...before 4 - 6 hours, the water will no longer be hot again. You can take it back and see whether the seller is willing to change it for you. Or alternatively, going forward, stop pouring hot water directly into the flask, wait a few minutes before doing so. All the best.

@@ivyludovic Thanks.

@GlozySignature The Keypad (remote) has to be within close proximity to the meter and you must ensure that Power is on too ie that there 'is light' in your neighbourhood. As long as you are close to the meter it should not matter where you face the keypad. However, to be on a much safer side, please face the keypad to the meter. All the best.

No. This only works for brand new flasks. Those older ones that no longer retain hotness, nothing much can be done about them. You can repurpose those ones for use with cold water/ breverages or for almost immediate use when you don't intend to use the hotwater more than 2-3 hours after pouring into the flask.

@@ivyludovic okay thank you mam

@odmmedia2 kindly watch the video. It was explained in the video. Bottom line is that power is not getting to your apartment so you may want to change your phases if you are on a 3 phase meter or have an official from your EDC check that there is no loose connection on your meter(ie your meter is faulty) and maybe manually change the phase if you are on a single phase meter.

@Blossom_3 😁 thank you soo much.

Try it with the lukewarm hot water again tonight and see whether it works. If it doesn't, just repurpose the flask for use with cold water only and get another one for hot water.

@@reghaaghogho4791 currently no.

@okorodeborah2973 its called 'Baft' material. You can get it from the market or people that sell materials. Its what they normally attach to womens wrapper to make it longer or wider. Students also use it for home econs practicals. Its sold everywhere.

Thanks ma

@RabiatHassan-v5k that is very strange. It works everytime so It may not be same as mine. Check in the description box for the codes of the other Conlog meter. If nothing works, kindly visit the closest business hub of your Electricity Distribution Company for assistance.

@@ivyludovic i would have sap to to but had to return it to my landlord to fix it,thanks

No please. After you bring down the water from the gas, allow it to cool down for about 5 to 10 minutes before pouring into the flask. The water will still be very very hot and you will be protecting your flask from future damage. I have a more detailed video here... th-cam.com/video/7bFWdTFpGGE/w-d-xo.htmlsi=Ds9HpQ1tmmLzWueQ