วีดีโอ

your method is interesting and helpful, however your videography made me sea sick!

I have been designing and drawing live aboard sailboat designs for a while and am now creating a scale cardboard model. I’m coming up to doing my IGCSEs. I have found it difficult to find where to go free my A levels to get into sailboat naval architecture. Do you have any tips I could have for where to go next?

Could have been shorter.

hi can i try this on printed canvas ?

Best way is remove the radio and the immobilizer is right there to plug it Its just right behind the radio

Stop waving the camera around, very distracting, had to leave.

Stumbled on your site... skimmed about 18 of the vids... excellent basics with honest comments as you learned and learned. I have to go to bed, but will be back soon and watch all. It is the concepts and details about building that shine through. Thanks for having the determination to hang in there with the efforts to share you experience. By now you have learned to trust you hands and eyes for making sure of fair curves and swells; two of Gods greatest inventions. As with all creative work you have learned to trust in so much about your mechanical skills! Oh, one more thing, get a lapel microphone so we can hear you ...

Yes overfill and sand to shape.

How important is it to mount your print onto a textured canvas? Thanks

Very useful but... the nonstop moving of the cam irritated at least me a bit too much.

Cool. How did you get the paper to not wrinkle when you glued? All of my tester paper is wrinkling... What material did you glue the poster to? I was thinking about using a foam board. What paper thickness was the poster? Lastly, was the clear coat sticking to the glossy paper? I tested both matte and glossy and the modge podge I used was not sticking well to the glossy... in fact, after it dried, I could peel the modge podge right off the glossy, but the it stayed in place with the matte finish. Thanks

Coming along! You’ve got more patience than a neurosurgeon. Are you reserving a bay in your dads future garage. Looking fine!

People actually pay for enhanced prints. Maybe you found your calling☺️

That was awesome I think sir. 👍 worked out well with a little patience. Now it looks like you have an actual painting. Or at least a gicleē Where did you get your prints?

My question is, what will you use to stop it from flaking off later and t protect it. Maybe mod podge as a final coat.🤔

Thanks for the progress update. Looks like it should do the job. A very well articulated explanation of the rationale for design reconfiguration.

Interesting I don't remember discussing these hatch details. Hope it works out well for you.

Nicely done, it is looking awesome!

I used a plastic bag to make the texture. First, i used the plastic bag and did texture all over, then I did my deliberate strokes on certain areas to make it look painted…and finally did another plastic bag texture.

Where can I find a frame like that

I will try this but using a textured roller instead. Wish me luck!

Getting it out was easy Getting it back in took me a couple hours. I was able to get it inhours later synched it up car wouldn't start because the time it took to get it in i drained my battery, so i took it out thinking it didnt work waited for the weekend and it took me all but 15 mins to get it in because i devised a tool

If you sprayed it again with a matching finish to the gel, maybe it would lessen the white spots.

very interesting. audio is out of sync though

I wonder if I could take a faded print and add color back to it first by hand... Let it dry then do this?

Good job! She looks like new.

I have 1 poster fixed/glued to a frame, do you think this process will still work? I worry that the paper gets dettached from the frame

Question, what kind of foam did you use? How would you rate it and would you use it again. I want to build a small boat, but the cost of plywood is outrageous. But so is this so called marine foam

Write years always Tnx

Thank you so much bro I just got the same car I had to subscribe

Pada menit 6:21 ada terjemahan "topeng" yg menurut saya kurang tepat karena kata yg diucapkan adalah "mast" yg berarti tiang layar.

I just binge watched and got caught up. Interesting project. Looks better than I expected. I was a car painter for 30 years, faring is very much like body work, and the sanding never seems to end. I think you would have better results with a plastic bondo spreader instead of a putty knife. Also, at this point I would be giving it a coat of primer, so it’s all one color, and easier to see defects, then mist a light coat of black spray paint over the primer. When you sand the primer, the black will stay in all the low spots, and you will see everything. Hope this helps. It’s probably the least fun part of the project, but worth taking the time to get it right. Good luck.

Nice work, you put into video form, how my mind works when I’m thinking about a project. I love it.

Great job and video. A lot like painting a car. You can spend hours improving voids but finally you get fed up and just spray it. Then you see what you didn’t see. She’s coming well and you’ll never be sorry for the hours spent. Wishing you the best of luck in the completion and years of enjoyment. Grandpa

Wow, I've just found you. This is fascinating, thanks for sharing your process.

I appreciate you for showing us this, Please continue to do videos!

I’m surprised there are no comments. This is my first video watching you and I gotta admit it’s very interesting. I’m doing something similar on a project boat of mine, but I’m turning mine into a motorboat. It’s the same design as this one. It was originally an 8ft row boat. But now the problem I have are those fiberglass bench seats. It’s not an optimal position to control the outboard. I’m gonna watch some more of your videos on this build. I’m excited for this project of yours, lol. Maybe I’ll just copy what you’re doing and Ditch the motor idea.

It's a good thing we're not interviewing as a shipwright

Taking shape nicely. It will float because even a concrete boat floats.

Taking shape nicely. It will float because even a concrete boat floats.

Did you custom install that radio? I'm looking to put something like that in my Chrysler

This looks great! I’ve experimented with impasto gel - it exaggerates the texture and thickness of paint.

Excellent. Keep up the good work.

Thanks for the update on progress made. If you keep adding glass and resin you’ll need additional outrigger flotation. Looks like your plan is coming together. Good father son project.

Great job Logan. Now will you get the Jaws of Life to extract your 79 year old grandpa from under the dash.

Are you still working on it?

What design was it originally?

Does everyone know how flucky different and weird artists really are! I'm talking about myself and other artist friends I've had throughout the years... I've seen this quality with all these videos created by artists.‼️O:-)

me: YES! FLOAT, FLOAT, FLOAT!! YESSSS! also me: PLEASE LET LOGAN TIP OVER INTO THE WATER.

Great seeing the process from design to tangible form, thanks for sharing!