วีดีโอ

My front carpets are wet. Could be the same issue?

Very new to A/V…so, I tapped into the four wires (all correct) in the car amp. Next, I bought a subwoofer w/ built in amp. Ran ground wire, 12v, and REM from LOC to the new subwoofer/amp. Started the car and LOC isn’t gettin power. Stock speakers still work but no power to LOC or new subwoofer. Any thoughts? Am I missing anything? Do I need to run power to the LOC or should me tapping into the existing amp speaker wires power the LOC? Appreciate the video. Very helpful.

As these are metal will they not rust as well? Sorry just read that they are stainless steel. thx. Done this today, mine where good so just glued the sleeves in , pleased.

Love it. Will have a look at our L405 but can tell you that this happens on all cars with sliding sunroofs, the design is pretty much the same from one manufacturer to another. We have a '93 Range Rover Classic and it leaked from the sunroof tray - basically the metal pipes were completely corroded - removing the rubber pipe just caused the remaining metal to crumble. So it's great to see a repair like this on the L405 before it becomes an issue. Thanks for posting !

What size insert did you use?

Thank you for such a great video. It really helped me with my decision to either go 20 mm & 25mm or your final application 25 & 30. I love content like this with real world comparisons. Your side by side comparison is very informative takes the guessing game out of this application. Until your video, I may have gone with what most recommend 20mm & 25mm. I just bought a 2016 Granturismo Sport with factory trident wheels that had stock tires up front size 245/35/20 and rear 285/35/20. Normally I buy new wheels that fill the entire wheel well and are flush with the fenders. For this car I love the stock wheels, added Formula Dynamic lowering springs and Formula Dynamic wheel spacers 25mm front and 30mm rear, because I wanted the wheels/tires to be flush with the fenders. I even went further with your application and mounted brand new wider tires: 255/35/20 & 305/35/20. I achieved the look I wanted where the wheel wells show a perfect fitment for a true sports car. DM me if you want pictures. I believe I pushed this application to its limit and there is no rubbing that I've noticed. Cheers and thank you.

Excellent tip thanks will check and do this on my L405

Please, please, please don't do this. I had a colleague who crawled under a vehicle with the air suspension stuck on high. He gave the height sensor a knock and it came down on him. I'll spare you the details.

my god that weed wacker noise would drive me crazy if I had to live with that. Those things are banned where I live.

Great video, thank you for doing the comparison as I was not sure what to go with. Definitely 20/25 is the best option for me, cheers!

Definitely don’t do that. Good way to get crushed when it auto balances or drops for safety.

Thank you very informative, however ever are these the only two? Are there none going down the A pillars?

Nice fix! How long incerts did you fit?

Ford have the similar problem, the outside cover spins leaving the studs still tight.

Just paid £120 ,to get one locking nut off took all of 5 minutes start to finish just got normal nuts on it now

More and more JLR rubbish.

Aliexpress makes a repair kit now

Many thanks for this, I’ve been meaning to do this since buying my L405 a year ago knowing that it is a real problem. Please keep any repairs you do on the L405 coming because it always great sharing any knowledge 👍

Well done

Thanks for this. Living in the west of Scotland, this could be a godsend 👍

I need this upgrade asap❤

Just got an MC and it’s the first thing I’m thinking of doing. Can you not do 25mm all around? Personally I think the rear is too far out at 30mm.

Thanks for sharing. Looks great. How is it weathering? Any issues staying in place?

I asked the company about tests on the aerodynamics of the set, or customer opinions. They have nothing. Can you tell me if you noticed a difference in handling at high speeds? And the worst thing is, didn't it get louder in the car than the noise of the air?

Looks badass Maserati 😊

Wait until you see my maserati when its done maybe in 2 weeks... I have carbon everything including a proper diffuser and carbon side skirts... Im on maserati forum posted a few pics there car is being wrapped matte lime green witn naked carbon all around will be a 1 of 1 when im done... My listing on the maserati forum is under super granturismo..

Nice to hear a fellow Welshman talking about this car. I am from south wales but live in Arizona. Have a 2013 gt, in grey with the same wheels as you!

Got the exact same car except my wheels are silver, love it but all the little things I want to do to make it perfect always lead me back to your channel 😂👍 Keep it up mate, yours looks smart

Okay so this is a really important question instead of putting these spaces on the car can't you just put a wider wheel on the car does that not make more sense

I have the same MC Sportline as well but I ordered a CF diffuser that straight covers the lower half of the back bumper, I always thought it's gonna look tacky and afterthought so I'm planning to color match the diffuser to body but leaving the center diffuser bit CF. Hopefully it'll be alright, would have been easier if I just go with your style

77mm

Very helpful

Link to purchase the spacers?

Thanks for the video. On the website, I don’t see a 20mm option (25mm looks to be lowest without going custom). Also, did it require any vehicle modifications by going with 20mm on front? I thought I read somewhere 20mm may not be thick enough to fit the spacer over the factory studs. Appreciate the insight.

Still waiting for a review on the GT!

Thanks for posting your GT videos! Does yours have the MC Sportline package?

every one should be having/driving maserati, public transport should be driven by masersati buses, trsain only delivery make -should maserati be, all of us, all population be should maserati boyfriend or girlfriend famili

Congratulations on "spoiling" the elegant timeless lines of the car with plasticky bits and making the wheels look smaller in the process!

Have the same GT but white. Where did you get the rear diffuser and side skirts from. Love your car nice upgrades

I came here from reddit/maserati. I will subscribe to any GT content that's for sure. Did you mention the year? I have a 2014 that is the same color but with bright yellow calipers. Nice looking car and the kit looks good.

Did you have to shorten/trim the original suds, for the 15mm spacers to fit the wheel on?

Is the rim width the same for standard xjr? I think those rims are wider, that.s why it.s possible to fit 295 on them Don.t you find the setup wobly?

What's the overall ET on that rim with the spacers? 35?

Is that 255/40/20 oem all around ??

What is your rim set up sir , beautiful video

Wish I’d known you can do this before I purchased a new set recently. I’m forever kerbing the wheels with this big brute! Thanks for sharing.

Looks great 👌

Have you lowered your car my friend? I have the same car only on red and yours looked lower than mine. I bought 25" spacers all around, would it be wrong or ok?

🍀 'promo sm'

www.bonoss.com/vehicles/iii-02-12/ Here’s where I purchased from. “KyleM” got me an extra 5% off.