วีดีโอ

Where did u buy the plastik gear u replaced?

But how to change the gearbox filter from inside?

Bagus

my gears are fine but the shaft is binding. Not sure if there's corrosion on the bushing or what. I'm unclear what's happening when you drive out the shaft. My non-gear side has a metal cover or seal over where you'd drive out the shaft. Does that have to be drilled out? And then what about the shaft bushings, spaces etc.? Is it as simple as it looks in the video? Can all those parts be reused? Than you!

Good job 🎉

Ey man I'm trying to locate that chamber in my 2015 RENAULT Megane and I cannot find it anywhere

i have 406 coupe 3.0 liter with this transmition automatic and gearbox not changing second gear and suddenly car stops all wheels blocked what can be the problem i change the oil 10k kilometer ago please help

what happens with the torque convertor?you dont fix?

how easily should the valve move? I thought it can be pushed VERY (this "VERY" is important here :D ) easily by hand and after disassembling my faulty valve i found that i have to apply quiet a force to move it. It opens/closes smoothly, i can feel and hear the mechanism inside how smooth it is, i just have to apply a lot of force to move it. Is it normal or is it a sign of fault? Is it possible to measure the motor somehow if it is good or not? (by multimeter on the pins?) Thing is that i am not a mechanic. But mechanic had to replace this part in my car (he did not play with it since he does not have time to play trying, he just replaces and goes on) and since its quiet expensive part i took it home and just cleaned it, removed a lot of carbon stuff and wanted to inspect if it could be repaired - or maybe the cleaning was enough, but i cant try it in any car (since i am not a mechanic and dont want to mess with my car). I have removed the four screws but its still holding near where the black connector is. I was afraid i break something but its the same valve as yours and according to your video there are no other screws so i might have to try harder :)

Can anyone help, where is transmission oil cooler located ?

good day, can you help me, my car PEUGEOT 307 Automatic (AL4), when i shift gear to drive or reverse it doesn't move, instead it write " INFO PLACER BOITE" i don't even know the meaning of that, can you advice me

IS THIS SCENIC 1?

If u replace the throttle body do you need to recalibrate it?

gde se moze narucit zupcanici

gde se moze narucit zupcanici

Where I can buy the repair kit?

Hello I have the same gearbox but I have a problème where is the filter of the gear box thank yoy

Schade, dass nicht so leicht w212, e250 man es reinigen kann!

A rimettere il tubo di gomma che da impazzire 😂

De cuanto es la resistencia que debe tener los solenoides o electroválvulas?

What were the symptoms of a damaged gearbox before the replacement?

hi hope you can please help me i have a 2003 citreon 1.6 automatic with the AL4 box on only done 33,000 miles and has passed every mot i was getting a slight nudge when selecting reverse or drive an auto specialist garage said needs a range switch and input sensor and recalibrating at cost of £600 ? but also said this may not cure it and may need a new ecu which you now cant get ? i had the oil changed and the oil was black but with no contaminents in ? this seemed to improve the box however once you drive say 20 miles im now getting a clunk when going from 1st to 2nd rest are smoothe changes but theres quite a clunk and nudge worse than before ? theres no fault coming up on dashboard and does not go into limp mode !! Acompany called 3d transmissions said over the phone i will need a reconditioned box at a cost of £3000 plus vat which is way out of my budget as im retired and on disability benefit due to long covid i really want to keep car as its just passed mot had a full service and had the timing belt and water pump replaced so if any one can help me with advice i would be truly gratefull i enjoyed the video thought it was very informative please help thankyou regards terry

Looks amazingly!!!

Very nice work Guy's!!! I percibe needs colimate a little bit 🙏🙏🙏🙏

PLEASE ADVISE. I replaced the solonoid as per this video.firet try I haven't done manual valve properly.started no gears. Then I re done with manual valve. Now gear enters and then engine stops when realese the breake. Can you please advise any cause?

Really not the good process for repaire a Gearbox

Mine A5 2,7 went into LIMP mode, and have this P0638 fault code - and some others. Can the Throttle body fault resault into the Limp-mode? Tnx

Thank you very much.

Hello, it's possible to interchange the AL4 Peugeot 406 automatic transmission with a more reliable automatic transmission?

Bom dia amigo qe lente é essa

th-cam.com/video/9ZpmSW7Ak_E/w-d-xo.html

How many time did you spend?

Hello, is the oil for the semi-automatic gearbox permanent or does it need to be replaced and does replacing it cause a problem

is this for faulty codes like P1710, P1167. I have been with a jerking, blinking of S, * in dashboard plus alarm sound, then, ENGINE WITH LACK OF POWER. pedal to floor and does not accelerate, the only solution at the moment is to shutdown and restart engine. I did a scan at the moment when this happened to me, and the faulty code were the P1710 and P1167. thanks

I had issue with solenoid valve pressure regulator and at the garage at Preston they declined they can change just valves. Sold me a whole block, which appeared is refurbished in French factory charged me 750 pounds for the refurbished block and 150 vat, 900 in total and didn't allow me to keep my old block as they had contract to return them to be refurbished or if I need keep my part the 750 was to go more..

Excellent thanks for the help

How long did the fix last? Cause I heard the problem came again after 50k till 80k KM

Thanks You!!!

Thank you so much. Great job, greater guy. Thumbs up. Both hands.

Какое сопротивление должен показывать соленоид

I have a problem after replacing the solenoids, the car goes forward in the R position. In position D it also travels forwards.

Does not the oil have to be checked at a certain temperature? How much degree does the oil have to have? Muss das Öl nicht bei einer bestimmten Temperatur geprüft werden? Wieviel Grad muss das Öl haben?

Sir I have vw ameo car there is a same problem can you repair my cars throttle body how much money it cost to repair

Thanks exactly what i wanted to know!!!!!!

I need to know where can I get the soninoil

Telephon i have one problem

Before starting work, the battery is disconnected and the transmission lever remains in P or N, thank you, you gave us excellent help.

And, what about Filter?

3:22 Anyone know where I can source a replacement valve return spring?

Is the plastic gear available after market or at company outlet ?