วีดีโอ

¡Hola! Puedes ponerte en contacto con nuestro servicio postventa para que te ayuden a solucionar el problema. service@yeehung.cn

Hello. You need to turn off the switch that uses the original Bluetooth channel. This is because once you turn it on, you must use the original Bluetooth to connect, and if you don't, you will experience what you are currently experiencing.

You're too meticulous. Try to keep the original sound for future videos.😊

There is no LCD dashboard adapted to this car yet.

Thanks for the support!

This car was used for testing and the top cover was previously broken. Be careful when removing it. Otherwise it will break like ours. You have observed it very carefully.

Friend. I know you purchased mine not our dashboard. Because we don't sell it yet. I can answer for you. Each manufacturer has a different decoder for their dashboards, so if you need the ability to cast the screen, check with the appropriate manufacturer to see if they have it. You most likely will not be able to use our decoder for screen casting. Because it's paired with our dashboard is used. Hope this helps.

Ok friend. The person I purchased the dashboard sent me this video to show how to install this why I thought it was your dashboard. I installed the MS9120 app and also fitted the dashboard following these instructions. The only part I am stuck is I do not have the tickbox option for Screen cast

@@DQJLONDON Friend, it's okay. Screen casting function requires a DISM box, this is the manufacturer to equip you with, if they do not support, that is no longer available, you need to connect a box, you see our video inside the connection to this box. One more thing, only Android screens support this feature.

Yes friend I have new 12.3" android screen install with the new digital dashboard. I have looked at this video and I have everything the same. All the cables and also the HDMI to USB adapter etc. Everything I have is the same. Even the MS9120 app is the same. The only thing that is not the same is the Screen cast tickbox 😥

@@DQJLONDON After connecting the box, you have to press the steering wheel button to the navigation position shown. Inside the dashboard function, check the navigation function and press once to use the Projection function. That's why you don't see the cast screen function. Hope this helps.

Works with the new 685 chip Android screen. Here's the link: www.pempcar.com/products/w205-x253-digital-cluster You can check it out first.

Hello! You can watch the after video. We use a harness adapter to establish a connection between the motherboard and the LCD display.

what time ? because it seems like you juste lay of the motherboard of the original dashboard inside the new cluster with no connection betwin them

@@abdelkaderboussaid2297 7:12 This is the time to start removing the stock dash cable jacks and replacing them with the LCD cable jacks to start the docking process. The principle of their transmission is via cable adapter. After swapping the sockets, the original cable goes directly to the socket on the new LCD screen's socket, and then a portion of the adapter goes to the socket on the original motherboard. Is this explanation understandable.

This is up to your preference. You can put the USB cable inside the armrest box on the right side of your vehicle. The cable is long enough.

Hello! You can send your question back to our after-sales service. Please rest assured that he will be able to solve your problem. service@yeehung.cn

1. If you have the original camera, set it up. Steps - Reversing Settings - Camera Type - Select Original Camera. 2.There is no protocol option for Linux screen, the protocol is directly adapted with NTG5.0. Hope it can help you!

@@YEEHUNGElectronics I already did and in addition I contacted Amazon (that's where I bought) they told me unfortunately I have a malfunction and that it often happens with Linux. I'm going to send it back and get an Android. Thank you anyway

You're welcome.

As long as the original car worked before, it will also work after installing the Android screen.

Look this: [FEATURED FUNCTIONS] Blue Anti-glared 1920x720 HD screen, 12.3" oversized display, multi-point capacitive touch function. It adopts 11 nm Qualcomm Snapdragon 662 8-core High-speed processor, 8G operation memory and 128G memory, with faster reaction speed. Bluetooth 5.0 supports playing music while navigating. After connecting to the network, it supports online voice control function. With a 1080P AHD reverse camera, you can get the HD reversing video. [MORE FUNCTIONS] Retain all functions of the original car. Support wired and wireless Carplay, Android Auto and wireless Mirror Link function. Support factory and aftermarket and 360 Camera, keep your original car radio, amplifier function, factory knobs control, original rear view Camera and reverse trajectory and so on. Support Bluetooth music and call, it's built in Wifi, USB ports. Support split screen, multitasking run 2 apps at the same time. Support Google Play and multiple languages.

Yes, you can, you just need to prepare a picture with 1920x720 resolution, change the format to png. you can only put one picture at a time in the USB flash drive, then plug it into the USB and it will switch automatically.

You send us the dynamic picture of the desired effect to our after-sales service, make the firmware package, and send it to you for replacement. Both static and dynamic are possible. Dynamic logo replacement method: logo compressed package into the U disk, start the car, directly into the device USB, will be prompted to import successfully, restart again can be seen. Static logo replacement method: prepare the picture, we will make the corresponding format, create a new folder, and named OEM, put the picture into the last inserted into the USB, in the factory settings inside the click BOOT LOGO, click on the import, and then go to the PAGE2 you can see the picture you imported. After selecting it, reboot again to see it. I hope it will help you! service@yeehung.cn

The one in the video is 10.25 inches, the one we currently sell is 12.3 inches, check it out if you're interested!

This is a hexagonal screwdriver, T20.