วีดีโอ

AgOpenGPS its DIY

Solberg makes a lot of silencers, even the tin can ones like this compressor previously had. Its 65db @3 meters, filter is dual element.

Hello this video is really old, this is a old V2 board, I currently only use this board as an output. Most people are building the all in one now.

@@potatofarmer Thanks. I am also using V2.5 old board currently. I wondered if it is possible or not to modify mine without switching to new type V4.5 board. I just want to cancel IMU nano and connect it to steering nano directly. What do you think? Is it possible for stable running?

@@maxxus5572 Good to hear this method worked well for you. Using the cooler was a good move, it would keep the water hotter. This year I put in a 20’ submersible electric heat trace. Tired of the poop roulette.

@@HellTriX I use a subsoiler to make a ditch, then place the potatoes in them by hand, then use a home made hiller to close them up with an 18” hill. The hiller is made to fit the planter box inside, just have not got to it.

@@potatofarmer nice ty

I think you need to watch it again slower. You have missed whats happening completely.

You lucky guys, spent some time in northern Michigan fall was a beautiful time. Must be similar. East Central Alberta Nov1 lololololololol 🥶🤧

Chevy 6.6L gasoline engine @2200ft asl, it burns fuel “efficently”. Not even towing. My 2010 deleted 6.7l cummins diesel gets 11L/100km under the same conditions and weighs 4000lbs more.

Hello, good afternoon. I would like to get in touch with you. Do you have any contact information you could give me? Thank you.

Not much combining left, but of course big rain. Almost complete with one of the two farms I help. Motivated lol, more Delirious lol

The combines are the lowest priority to get setup. Did swathers this year

@@potatofarmer do like your Ace project, keep on the good work.

@@landlifem5872 Post Malone phoned and told me to stop. But I could barely hear him over the sound of the straw chopper.🤣😂🤣

Done a pile of "Internet Science Paper" reading, Yellow will attract wasps and bees. Apparently Blue is the best for attracting flies. It would be tough to be a New Holland at a manure pile. I think TPU is outperforming PETG because it more readily absorbs moisture, and subsequently absorbs the bait stench and fly pheromone sent and holds it. Also playing with different internal cone colour to prevent escapees, but have not seen any escape yet.

Ahhh your the source of all these lol! Still have a few tricks left to test. Going to try yet another colour and also switch up lid/cone colour.

@@Farmer1277 Ha! A stray cat just showed up out of nowhere, wife fed it, and now just follows me meowing non stop.

The hard part is if it was 100% ideal it would cost so much no one could afford it. It sucks but china is here to stay.

I use the most generic PETG available. I get it from either 3D printing canada, of hobby wholesale in edmonton. Before printing leave it in the dryer for 8hrs, then leave the dryer on while printing. The K1 max is stock other than a steel nozzle and a textured plate.

​@potatofarmer I have the 2nd gen k1 max that comes with the unicorn nozzle and different or updated bed. I rooted mine on day one. I jammed it with Overture PETG on the first try and it made me so mad lol.

@@Farmer1277 mine has the updated hotend just before the unicorn nozzle. Its all stock and has been pumping out PTEG prints pretty regular. Retired the sermoon d1 to TPU only. Both on steel nozzles, because brass just wears too fast making parts.

@potatofarmer interesting. The unicorn nozzle is a hardened steel nozzle. I plugged the nozzle twice when I first got it and jammed the extruder with PETG but since I rooted it and changed the extruder current I haven't had issues since. I push petg and abs/asa into the 300mm/s area

A cereal implements swather, just like a massey 220 but green.

@@wizardgaming669 Not sure, you could contact them.

@@robertmintz63 Dig 300 hills every year by hand, picking up is the easy part!

@@AgOpenGPSMagyarorszag You have an impressive number of installs and problems solved! Worth a shout out :)

Sure beats the Trimble turn on your own tracks method. These little levels are handy for so many things!

@@potatofarmer The trimble had no autosteer, sold it and the money finaced a full AOG kit with hydraulic valves :) Both tractors in that video runs AOG today

Think of UDP as a radio station, its just dumping the data out to anyone who wants to hear it. There is new data every 100ms, so no need to verify just keep streaming the new data out. If it was not received it was probably junk to start with.

@@potatofarmer i didn't realized that even MQTT can go over UDP, but that would be a little overhead

Directly from emlids website for the M2, the antenna was off ali express.

Im developing custom PoE boards, and enclosures. But the tablet is still the most expensive part.

@@potatofarmer Please tell me rough number of cost of all that.❤️

Nowhere at the moment, Drew it in Autocad, and the air filter adapter. The filter housing is a yanmar tractor filter from aliexpress.

Are you willing to upload the files?

Alberta, Canada

Once im happy with it and the electronics

Coming from you that means alot! Merci Beaucoup!

@@potatofarmer 🤩

Good thoughts, but what interference? Lol The survey antenna comes with a tin plate underneath fused to its pcb, under that is the Gps electronics card, the POE further isolates and filters the power, very clean power on the oscilloscope. I moved the neo magnets outside and they bite harder, the first design has them in TPU. Only thing that has to go the distance is the data!

The new one is survey, and also takes advantage of a new board for the F9P Micro. In a mostly open area performance was great solid hdop of 0.6-0.74.

The JD oil during the oil sale is the same price per litre as mobil 1 0w40 on sale at Walmart. Stellantis currently wants $24.00 CDN for a Mexican oil filter pre tax. The JD US made filters are $11.50 CDN after tax…. But had to buy a case of 12 for that price. OEM oils are of course outsourced to an existing refinery, but the OEM dictates the additives package added to the base oil. 👌🏻

Yes Emlid M2 base station has been running nonstop in an uninsulated shed for 2+ years!

Not sure what potatoes are worth its been so long since I’ve bought 😂