วีดีโอ

The funny thing is when I was looking for splitters last year as an elderly woman the first video that came up showed a guy hammering the log into the other end then screaming how bad it was. I hadnt realized the name. Now Im wondering if he was just goofing but I never tried to find out what it was until this winter using different key words.

Please do not use music with your video

Hi i noticed you have a big hose clamp around the top of the pipe where he attaches to the ceiling adapter. Im cleaning my pipe for the first time and the installer didnt screw through the tailpiece, more like a set screw, but it bent in. And he didnt install screws in the other 2 holes at the top.

I want to buy one for myself. Any ideas on how and where? I'd like to order one.

If they are possums, you are lucky to have them. One of the best backyard critters to have. Don’t believe me? Look it up.

Thanks for your video. I had an old rocking chair that I had painted white 18 years ago for my daughter in law but she left it when she moved. It sat on the front porch for 17 years. After stripping all the white off, spindles weren't fun, I found 1 of the rockers was 1/2 way rotten where it made contact with the concrete. I thought I had to use wood patch knowing that probably wouldn't work. Then I found you! I just happened to find a piece of wood to get only 2 rockers exactly! Maybe my dad saved it for me! RIP dad. Thanks and sorry for the long story...I'm Italian! I could tell a story no other way! 😊 Thanks again! I'm going to go for it. Did you send on an angle on the inner rail? Have a great day!

that video gave me the info i needed for sure.. i was wondering how to do the rollers and brackets.. thank you

That sounds nearly identical to what Ive been hearing and came across the same fix. I bought the assembly and replaced the solenoid as well but to no avail it is still happening. Really thought I found the problem. Any ideas if there are any other components to this vacuum I may need to change or check? Not sure how to test if it is getting proper vacuum or not.

If you are experiencing this and you can’t buy a sink you can take a hot air gun and maybe get the drain fitting off by heating the fitting not the sink drain and maybe cut the fitting in a few places vertically on the fitting and slowly prize the fitting off being careful not the damage the sink drain the heat makes the glue come loose. I’ve done it before with PVC.

That is about as simple as it gets . You should also mention how important it is to have good help when installing the panels.

#armadillo

What's the conversion for propane BTUs to 9mm hollow points?

very nice Craftsmanship , do you buy kits or. Individual parts for all the Hardware needed? I’m a retired Professional Woodworker and I actually have a very large Extended Family and Networknof Freinds I’ve been thinking about building Several And give them away as gifts for Families to save on the expenses of the Funeral Costs that are IMO Outrageous

I'm planning on getting a couple of these. Except I'm going to be Lag bolting them to 8ft 6x6 beams then bracing with 2x6s because I am putting them on top of a seacan. Should keep everything together.

I have Similar Panels like yours from Sunpower But they are the 460w variant. (Bifacial) This is by far the Easiest Mount I've seen so far on youtube. Ive tried a few, Ecoworthy mount (it's the worst) EG4 Brightmount, It's really nice but there is a "LOT" of work involved to get them up compared to this. Thanks for doing the Earth Spike Method. It was something I was considering. Although I might just put rocks underneath my setup since the panels I have is Bifacial to try to get a little extra solar

I love what you did! My experience with ZIP Strips outside is the UV will make it brittle and break, maybe get some wire,,,

Welp I now know wth is digging these holes in my yard now. It’s most likely a opossum trying to find grubs.

Txs! (Barn-6 slidding wheels’s pamphlet is irreadable)

I'm putting up mine now. I have more in stock for purchase at NC Solar Electric LLC.

Well done vid, but what does one do when the piping goes directly into the tank? Waterless trap is used.

Good job

An update. Still works amazing! Hoof trimming, giving shots, milking - everything is a blast with this. Thanks!

Great video! It was hard to find a video that shows how to clean wood stoves with the ceiling close but you did it! Thank you! About cleaning the glass: we use wet newspaper with the ashes left after a fire and it works wonderfully and saves on chemicals!

How to drill if don’t have pocket hole

Nice system

Just installed a 10-panel array (395 watts) using this ground mount and it was super easy. Put mine on a small hill which did result in some extra leveling but nothing major. I enjoyed the video

alloy costs so much . i know it can withstand for decades even salty environments but i think stainless or galvanized and painted methods in iron will cost 1/4 .. or even less if there is local stock in market!!!! nice racking Btw

Great idea new EcoFlow delta pro 3 and EcoFlow delta smart Duo fuel Generator 4000 watts test it out on TH-cam video 😮👍

I was feeling very sad😢

WELL? ANY FOLLOW UP???😢😢😢

Thanks so much for the video. Mine are coming in next week and so glad someone did a video with the anchor spikes. That is what I am doing as I have a slope of about 6% where I am putting them. I checked with the IntegraRacks and as long as <= 10% and anchor spikes, should not be an issue.

I am considering this system. Great job . What was the the cost of your setup?

Look's good u 2....

I have one of these and I love it.

Very interesting and informative!

Where can I buy the hardware?

Just found your channel. Would love to hear why you left NC for NM. We live in Co and it is a challenge for me to garden here.

Have you had any issues with rot or warping using untreated pine?

We made two of this style and two Peterson and this style has been occupied while so far, the Peterson houses are empty. Great video Thanks!

Did you ever figure out what made the holes?

Could be Moles or gophers

That is a deluxe cold frame! Beautiful

Very helpful

Thank u I've been trying to find the name for these for an hour

What brand of hardware did you use?

How did you seal the peak where the pieces meet?

Woodchuck/groundhog. Signature crescent-shaped mound of dirt framing the hole 😁

How do you get the energy from it

I'm guessing most people are here because they searched DIY coffins, or something similar. Simple but beautifully done.

Nice box build. I noticed you used screws instead of brad nails. I have heard some people say they back out. Have you had this issue or you just happened to use screws?