- 65
- 116 948
Whites Performance
เข้าร่วมเมื่อ 22 เม.ย. 2014
Big Turbo SRT-4 Takes On A Procharged 4.6 Mustang GT
Having some fun with a buddy of mine. car was turned down to around 22psi around 450whp. The mustang claimed 550whp, dont know how true that was but power to weight helps alot. Also his car sounds insane!!
มุมมอง: 1 416
วีดีโอ
Clutch Masters FX400 Didn't Like 500 Plus Horsepower
มุมมอง 1.9K3 ปีที่แล้ว
I've only had this clutch for about 2k miles and it already broke. this clutch is "rated" for 480whp and we made a little bit more then that. the clutch has been through a lot launches, burnouts, ect. We will be upgrading to either a clutch master unsprung clutch or a act g6 clutch to handle a lot more power!
Jarod White Blew The Stock Bottom End Record Out Of The Water!!
มุมมอง 1.8K3 ปีที่แล้ว
Jarods car is insane. We all have no clue how his car is performing this well not only with a COMPLETE stock bottom end but also a hurt head! He just reset the record to a 9.95 @151. Lets just say this record isnt going to be reset for a very long time!
Big Turbo SRT-4 vs Bolt On 10R80 5.0 And V10 BMW
มุมมอง 2.8K3 ปีที่แล้ว
finally was able to get street racing in over the weekend before I head south to C-bus for import face off.
Shaved Off 100lbs From Carbon Fiber Parts!!! Also Gapped A Hellcat.
มุมมอง 1.5K3 ปีที่แล้ว
Long video but i honestly like making these. I somehow managed to shave off 100 pounds with me in the car and it weighs lighter then what i thought.
Fully Built ACR Comes To Life!!
มุมมอง 1.1K3 ปีที่แล้ว
Its crazy to think that im slowly building my dream car day by day and im able to share it with everyone. Not only can i always go back and watch what i did but it also helps anyone looking to build theirs as well. Now that the car seems to be running smoothly after putting a few hundred miles on it. I think its time to start chasing after that 10 second pass again!!
Installing Lower Rear Control Arms Pt2!!
มุมมอง 1.8K3 ปีที่แล้ว
Installing Lower Rear Control Arms Pt2!!
Installing Rear Adjustable Control Arms pt1
มุมมอง 9863 ปีที่แล้ว
Installing Rear Adjustable Control Arms pt1
Didn't Think Carbon Fenders And Hood Would Look This Good!
มุมมอง 1.4K3 ปีที่แล้ว
Didn't Think Carbon Fenders And Hood Would Look This Good!
ACR IS DOWN!!!!(sent it alittle to hard)
มุมมอง 6703 ปีที่แล้ว
ACR IS DOWN!!!!(sent it alittle to hard)
Taking Friends For A Ride In My 500 Plus SRT4!!
มุมมอง 7K3 ปีที่แล้ว
Taking Friends For A Ride In My 500 Plus SRT4!!
Taking My Acr To Its First Test N Tune!!!
มุมมอง 7023 ปีที่แล้ว
Taking My Acr To Its First Test N Tune!!!
Project ACR Part 4 Porting Ebay Manifold(New Clutch For The Drag Car!!!!)
มุมมอง 9393 ปีที่แล้ว
Project ACR Part 4 Porting Ebay Manifold(New Clutch For The Drag Car!!!!)
A Subscriber Sent Me A Mopar Short Throw Shifter!!
มุมมอง 6643 ปีที่แล้ว
A Subscriber Sent Me A Mopar Short Throw Shifter!!
First Sponsor, Melted Head, Billet Tone Wheel Install!
มุมมอง 7033 ปีที่แล้ว
First Sponsor, Melted Head, Billet Tone Wheel Install!
Project ACR Part 3 (short block tear down)..4 Broken Ringlands!!!
มุมมอง 5733 ปีที่แล้ว
Project ACR Part 3 (short block tear down)..4 Broken Ringlands!!!
Project ACR Part 2 (kirkey seat,harness bar, and racequip 5 point install)
มุมมอง 8244 ปีที่แล้ว
Project ACR Part 2 (kirkey seat,harness bar, and racequip 5 point install)
Project ACR Part 1(Shell Walk Through & Cylinder Head Tear Down)
มุมมอง 5324 ปีที่แล้ว
Project ACR Part 1(Shell Walk Through & Cylinder Head Tear Down)
Finally Picked Up One Of My Dream Cars!!
มุมมอง 7224 ปีที่แล้ว
Finally Picked Up One Of My Dream Cars!!
Ebay Turbski Or Big Wheel stock Setup?!?!
มุมมอง 2.3K4 ปีที่แล้ว
Ebay Turbski Or Big Wheel stock Setup?!?!
I Bought The Cheapest Running & Driving Nissan 240SX!!!!
มุมมอง 2854 ปีที่แล้ว
I Bought The Cheapest Running & Driving Nissan 240SX!!!!
Taking Apart My Fully Built Motor For Better Parts!!
มุมมอง 3594 ปีที่แล้ว
Taking Apart My Fully Built Motor For Better Parts!!
DNA Exhaust Gets Turned Into A Side Exit!!
มุมมอง 1.6K4 ปีที่แล้ว
DNA Exhaust Gets Turned Into A Side Exit!!
D.I.Y (How To Build A Drag Wing For Under 100$)
มุมมอง 2.7K4 ปีที่แล้ว
D.I.Y (How To Build A Drag Wing For Under 100$)
Track Day With The Daily Neon Didn't Go As Planned...
มุมมอง 6744 ปีที่แล้ว
Track Day With The Daily Neon Didn't Go As Planned...
Hey bro , what size spacer do u need for those wheels ? Front and back I wanted to pick some up but the offset is nowhere near stock
We have been running Clutch Master’s Clutches for years street driving and track fx400. They do great, you may have just reached the limit of that particular Clutch have you actually talked to Clutch Master‘s to see what that FX 400 is capable of handling?
Awesome dude!!
Awesome dude!
My v8 is whisper quiet. I love it.
My favorite video sound soooo good
Str8 Fartin
Meh that one wasn’t funny at all. Try again
That car looks hideous 🤮
Come get gaped by it sweetie😘
Is that a neon?
I wish lol
No it aint... lmfaooo
Says who?
Bro smoked 5.0 on spray dannnnnn
Remember when legacy auto gave a damn about the average enthusiast? Pepperidge farm does
that wasnt very funny try again
@@whitesperformance1402 its a 20 year old joke so that's fair
That is an exhaust leak and a leaned out tune
Hood exit try again🤣 and on base map so you are correct on that one
Super lame car!
You must have gotten gaped by one of
Thats because it has a miss and a bad exhaust leak
Easy there ghost rider lol car was on a base map with a hood exit. Not supposed to chop that hard but continue to be a TH-cam mechanic you’ll learn one day🤣
When I leave the choke closed on my mower.
🤣🤣🤣
sounds like my lawn mower after i leave it out in the rain lmao. how does it feel to dump money into a car i can beat with my stock v6 mustang lol
lol easy there killer. I would say let’s run for pinks but I don’t wanna take your mom’s yard ornament away from her.
No replacement for displacement
Chevy HHR SS panel van.
yeah thats a negative sir
That cam tho!!!
Nice sounding snowmobile
lol this actually made me laugh
That's how my 35yo 2 stroke idles when the carburetor needs cleaned.
you should get that sucker fixed lol
What have you gapped tho.....
come find out
Sounds good Devin!
Clean ass whip😮💨💙I have an 03
If I unplug half of my spark plugs I get the same chop you got.
lol you should try it
@whitesperformance1402 I'm kidding. Your car sounds great but I'd think a built 4cyl would have more chop considering half as many fires per revolution.
@@olliea7805 car was on a base map so cleared up a lot more once it was fully tuned
Does not sound, or look good
🤣
Must have received a gap from a SRT4 in the past
Cap
Is it though?
Probly should tighten that spark splug. Sounds like it's miss firing....lmao.jk
What cams
Bc stage 4, cam on base map. Shouldn’t be chopping that hard at all
@@whitesperformance1402 im on same cams mine doesnt chop that hard either. Was curious
Question I just found a crack in my exhaust manifold and Im under boosting, target boost is 23 and im only hilding 15 is that the issue ordered a new one already was just curious btw bad ass skittle
that will be most of you issue, also go though and do a boost leak test as well
@@whitesperformance1402 I appreciate it fam I'll let you know how it goes
Dam straight brother
My boy is lackin on the videos lol. Man whats the deal on the new rust bucket brutha? Waitin on that update 🫡
ive been sick all week on top of the heat in our shop not working so its been single digits the past couple days.
Hear me out: swap in a 1.9 or a 2.0 TDI with the full awd drivetrain from a golf or a TT. If you didn't wanna deal with the rear diff from VW, you could maybe use one out of a late model STI or something. Call it the DRT-4.
Nah😂
I miss mine. I'm driving a Focus RS now but still remember the good old SRT4 days before I crashed mine last winter. 250k miles and still ran perfectly.
It's 2024, you can identify however you choose. It's your truth.
False
Does your interior raddle? Any chance do you know a solution to fix that?
in this car in particular no. Ive had cars in the past rattle but never figured anything out to stop it or even look into it.
Meh. I like my jeep wrangler better.
yeah thats gross bud
Neon looked like ass but it was quick
quick piece of ass*
No bro no...hell no ugly as hell evo all day
2nd Gen Turbo MR2 for me
ditto, rwd and two door coupe is always better. for a fwd sedan, the neon's not too bad though
Love it make me wanna walk to garage n see my baby parked for winter it’s and 04 with 294k I bring it out spring to fall still runs like a campion all of my friends love the car
Put a G6 on that pony.. And not the Pontiac 😉 ✈️
Man.. havent heard of a srt4 in awhile... those things were DEADLY on the streets for people ballin on a budget. Would actually like to own one
There's a neon out there, Julio pjbwerkz made a 1006hp on his srt4 build. Pt6870 gen 2 420a head. You have to ask yourself if you're going to do a swap why do it? Whats the cost and benefits for that cost.
yes i know exactly who that is, talked to him plenty of times about the 420a setup. is it cool yes, does he make 1000hp yes. but you take the time and money to build a k series you will get the following 1. way more companys out there that support the honda platform. 2. off the shelf parts on a motor that has been proven to make 1000hp reliably. 3. the option to run a awd setup or not. 4. stronger transmission. the list goes on lol
@@whitesperformance1402 you will have problems from K20's as well nothing lasts forever, something will give from the abuse it's a given. I cannot tell you how many of my friends said the same shit going to an LS setup and "oh it'll make more power and less shit will break"... Got in the same hole and it was more expensive to get out of this time... There's a lot of guys out there that have made big numbers reliably relative to the abuse that was seen, Zoe zhp has built quite a few 750-830ish cars, Julio pjb same built a lot of high hp cars, Nigel BST, pumpking srt, Bradley Dillon, the entire DCR team. Theres another dude out there that recently went 8.50 on a Hpattern 420 setup. Bradley Dillon did 8's on a really simple lot of stock parts setup. There's a decent amount of people who have done it. Using stronger transmission as an argument is not a good one because Liberty the same people that make the bad ass Honda transmission dog boxes also make the SRT dog boxes. As well as ragetek. The problem is there's not A TON of people out there that really know how to make a neon reliably go fast, and I do understand the support for Honda's goes much deeper than the SRT. The support has grown over the years and continues to grow at a slow pace I will say but it's there. Fairly recently they released more EMS systems for the platform and before all you had was Diablo and AEM EMS. The AEM was WAY AHEAD OF ITS TIME!!!! it's still being used and it was released in like 08 I think... but I will say if someone can make a RWD srt4 with an srt4 motor. You can do anything you want with that platform it's just up to you and what you want to do with it and what you plan to achieve and accomplish.
It’s crazy to think that a K series can make 1000+ hp. Like bro that’s 300 more thsn a hellcat
Thats be kind of crazy
no its not the eve was
eve? no such thing
@@whitesperformance1402 lol got me there buddy stupid auto correct lol I meant evo🫵🫡🫡🫡
Bruh!!!! Get ahold of me! We have so much srt4 stuff to discuss bro…. Nohomo