- 69
- 111 209
Autopilot_Austin
United States
เข้าร่วมเมื่อ 5 ต.ค. 2015
This channel is dedicated to all those who love aviation! I am an avid flight sim enthusiast of many years, a professional pilot/ CFI/ elitist tailwheel pilot by trade, and lover of all things that fly!
Discord: autopilot_austin
Discord: autopilot_austin
Beautiful trip home from the Bahamas in the TBM 930
Take a ride with me on my trip from Stella Maris Bahamas (MYLS) to Fort Lauderdale Executive Airport (KFXE) on the way back home to Albertville Airport (8A0) in the Daher TBM 930!
Still learning a lot about the Insta360X4 and found some of my shots were a bit overexposed. I also think the AI stitching or the frame interpolation may be what is causing the artifacts in the time lapses. Sorry about audio, still don't have a solution for that!
Find me on one of my other platforms:
- Instagram: autopilot_austin
- Facebook: profile.php?id=100004606218573
Still learning a lot about the Insta360X4 and found some of my shots were a bit overexposed. I also think the AI stitching or the frame interpolation may be what is causing the artifacts in the time lapses. Sorry about audio, still don't have a solution for that!
Find me on one of my other platforms:
- Instagram: autopilot_austin
- Facebook: profile.php?id=100004606218573
มุมมอง: 645
วีดีโอ
TBM to Stuttgart
มุมมอง 287หลายเดือนก่อน
This is a compilation of clips in the TBM 930 that I shot with an Insta360x4. I am still learning how to get the most out the camera and have yet to get an audio solution that works but i hope you enjoy anyway!
DCS Sortie in the Soup
มุมมอง 739 หลายเดือนก่อน
A recent flight with my friend in DCS on Flashpoint Levant in the AV-8B-NA Harrier. Our BAI mission and the meteorilogical conditions presented us with poor conditions for VFR flying and target identification. Through use of the harriers FLIR and DMT we were able to complete our mission and decided to preform a RTB to Hatay airport, almost exclusively through visual references and dead reckonin...
DCS AV-8B Takes a Beating
มุมมอง 7639 หลายเดือนก่อน
Solo DCS flight on Flashpoint Levant in the AV-8B-NA. This is what can happen when there are no friendly CAP aircraft up to fight the red air. To add insult to injury the AWACS, Darkstar, was giving me BRA calls for aircraft 100 miles away while ignoring the closing red aircraft! #digitalcombatsimulator #harrier
Not All DCS Sorties End with the Greasy Side Down
มุมมอง 20610 หลายเดือนก่อน
A recent solo DCS flight on Flashpoint Levant in the AV-8B-NA Harrier. Really enjoying this aircraft and this server. There was also some very entertaining SRS rambling this night. Apologies for the transitional editing glitches and lack of own voice on SRS. I am still working out some issues with the editing software! Timeline: Startup - 00:00 Entertainment - 01:20 Takeoff - 07:21 Climb - 08:2...
Art du Vol
มุมมอง 287ปีที่แล้ว
Some Twin Comanche (PA-30B) and RV-4 formation flying en route to Triple Tree (SC00).
Very Poorly Executed Ready or Not Mission
มุมมอง 142 ปีที่แล้ว
Definitely all my fault lol. ft. Toxicsalmon24 and SubZer0
DCS F-16 Sortie ft. Cburks87 & Toxicsalmon24
มุมมอง 662 ปีที่แล้ว
DCS F-16 Sortie ft. Cburks87 & Toxicsalmon24
Piper Cub hop Guntersville to Albertville
มุมมอง 664 ปีที่แล้ว
Piper Cub hop Guntersville to Albertville
Barber Motorsports Dad's sessions 11/22/20
มุมมอง 404 ปีที่แล้ว
Barber Motorsports Dad's sessions 11/22/20
Morning SEAD mission with F-16's Feat. SlyGuy
มุมมอง 374 ปีที่แล้ว
Morning SEAD mission with F-16's Feat. SlyGuy
Limits were found, lessons were learned Barber 370z
มุมมอง 664 ปีที่แล้ว
Limits were found, lessons were learned Barber 370z
Barber motorsports park 370z hot lap 1:45.38
มุมมอง 1514 ปีที่แล้ว
Barber motorsports park 370z hot lap 1:45.38
Rooster's VTX range test flights 5/29/20
มุมมอง 364 ปีที่แล้ว
Rooster's VTX range test flights 5/29/20
Quad signals demonstration for TBS support
มุมมอง 124 ปีที่แล้ว
Quad signals demonstration for TBS support
Nice TBM
@@Hunterminez thanks! I wish it was mine but I’m grateful I get to fly it!
Awesome video. Seems like a dream flying the 930!
@@StruckHD thanks! I’m definitely still perfecting operating it. But it is a really neat airplane!
I can do that too. Years of GTA5 and I'm an ace
@@KevinDaUnicorn 😂
Love the euro dash
Euro dash?
great video bro, whats ur pc specs
Thanks! It’s a 9900k 5ghz all core, 3080ti with a light OC, 64gb or RAM, and NVME SSD.
British techonology when it actually has to compete with other countries:
"Buzz we missed the truck" "I'm not aiming for the Truck"
Great!
That twinkie needs a belly rub!
Sounds good I've got a wrx hatch 510 hp with a quad cobra sounds very similar
In the bonus content, your buddy wiped out on that jump b/c he landed with his tips. When you jump, you gotta land with your heels.
The power makes up for it being a narrow body
I grew to like the narrow body. If it’s not all garbaged up with visual mods it’s very clean!
I still got mine. The rods are playin a drum solo tho lmaooo
That’s funny bro! Yeah mine held up till a little over 90k miles for me and then the new owner blew it up within 1000 miles! If you’re good to them and run them on E85 they’ll last a loooong time.
@@Autopilot_Austin in NY so e85 is hard to come by. Porbably just swapping in a ej20x and save some bread. Definetly would love running some light anti lag though lmao
Hot damn son! 4.44 gearing?
I think it was 3.54 or 3.60. It was a R160 paired to a STi trans!
@@Autopilot_Austin wow, that anti-lag makes a huge difference in throttle response. You were rowing them gears and with a 3.60, lol. Thats a brave driveline matchup🤘. Whats the setup? You got the "rocket pipe" 😈 or just a butt-load of boost?
0-60: instant
does this shift feel as hard as it sounds like it does lol
Lol yes! That was a few years ago but that car was the best.
@@Autopilot_Austin How did you like the Fortune Autos?
@@okseby I realllly liked them. Really nice compliant but sporty ride. Having had experience with BC’s they were better all around. I heard Feal products are great too but I went with fortune because of a sale!
18:57 Murray Moment Rippy dippy
23:09 When you play too many fps games and your reaction times murders your game score
Do the gears sound like that because of the swap? Sounds really sloppy
Sounds like a sequential.
I was just flat foot shifting for this clip so the revs were jumping around a lot. The engine, trans, and diff were all on shock bushings so there’s a lot of slop there but the trans was trans was solid. Not so solid it felt unrefined but just slightly compliant!
what are we supposed to hear with that annoying sound in the background? ¬_¬
Made this when I was 16 lol. But I’m sorry it’s such a inconvenience to you to occasionally find a free but imperfect TH-cam video 😂😂
@@Autopilot_Austin No thanks I've heard anti-lag and I hear quite often just wanted to know what the hatch sounds like. No worries there are many out there.
@@Spg-93 well if you don’t know the Q300 for the hatch sounds basically just like the Q300 for the sedan and the sound comes down in large part to the type of headers and if the system has any catalytic converters or not. There’s another video on my account of specifically exhaust sound.
@@Autopilot_Austin I'll check it out! thx
how much hp is it making
It was around 420WHP!
It's satisfying shoosting people with combat sniping tho
But I do agree mortars is annoying
XD
Is stock internals?
yes!
Brutal torque
how to method ? this is ded ? platform is moving ?? Tilt & Rotating ?
Do you have Instagram ?
Yes
great driving. Your Z sounds amazing!
Thanks!
Next time you fly to Auburn let me know. I have a kid down there now.
Hell yeah man will do! Let me know if you ever do wanna go down. I don’t do it frequently but if I had a reason I’d go more often!
@@Autopilot_Austin I don't really have a reason other than to see Leroy and I really enjoy being in the air.
Did it plug in where the old board did or how did you power it. Looking to do the same
It operated completely independent of the quadcopter 👍🏻
That mod list is longer than my college transcripts but it sounds awesome
Niiiiiiiice haha
Nice correction lmao
Thanks lol. How’s the ride man?
Cool, can you tell me about your car setup, power etc? Heading there in a month for first time.
hell yeah you will have a great time! The car is lightly modified overall. 75-100lbs of weight reduction, two piece rotors, carbotech pads, nismo gt pro LSD, bf goodrich slicks, some aero work, 3" brake cooling ducts, a lot of coolers.. ie two massive engine oil coolers and rear differential cooler. Thats mostly it! For us its been all about keeping everything cool enough to run full length sessions to really get our moneys worth!
@@Autopilot_Austin thanks for sharing.
what tires is the black one running ? they seem like they rub, it`s stock height, right ?
Gotdamn that rumble 🤦🏿♂️
Funny you mention it. I miss that rumble every single day lol.
What rumble ?
How did you mount the run cam
If I remember correctly, I mounted it with a 3D printed part I found on thingiverse for the runcam! I velcroed it to the top of the nose cover right behind the camera near the CG!
was it the two screws on the rear of the motor that holds the shaft. dey tend to come loose. put some blue lock tight on dem
yeah that has been a problem for me on bkb motors but ive actually never had that problem with torqueboards motors! This failure was actually due to magnets detatching from the can as well as cracking!
Is this track in GA
yes it is! Its generally in the Savannah area!
wastegate?
No external wastegate! Blouch 440 internal wastegate 👍🏻
Looks like you guys had your hands full! I enjoyed driving with you and meeting your Dad before the last session. Tell him I said Hey! I have some video of you posted on my channel... it's in there somewhere... several of them. I hope to see you out there soon! - Blue Camaro #1 (2:02).
Awesome thanks! Yeah the car was weird but i also think it was the surface at Roebling too, it was a new experience for sure! I'll tell him you said so! Will you be at AMP?
Several drivers complained that they thought the track was a little slicker than usual. I'm not planning on AMP in May but maybe in August and maybe Barber in June and of course Roebling again in November. I want to do Road Atlanta again sometime this year but my schedule is not cooperating!
@@MikeDirth I feel that! Hope to see you next time!
Chill out, don't panic!
LOL I mean to be fair, if I was paying for the damage when it switched ends I might not feel as ballsy hahaha
@@Autopilot_Austin Here is some video of your car starting at around 3.00: th-cam.com/video/nH9uzMuaZtg/w-d-xo.html
@@steved0x sorry i didn't see this sooner! thanks!!
yeah that looks like dad driving! Hoping next time you can work with us on the line. Also planning to try some re71r's or something next time!
Are those aftermarket taillights?
+Cyrus Stites nope! Just vinyl overlays! You can find them on rallysport direct!
hey i have this same issue i think, i bought the pro3 conversion kit on diyeboard.com and both motors have had that retainer thing come out, so does glueing it actually work cuz thats seeming like a good option right now condsidering i just bought a third motor of the same type(190kv 6374 torquebords motor) and it still has the same problem, retainer came loose the same day i got it and it makes a horrible sound ad mid speed
yepp im beginning to think the tb motors suck. im on my third and my roommate just got a new one thats noisy AF. Yes the gluing works if you use the right stuff. but fix it before the magnets come loose too. once that happens theres not a lot to be done.
wow yeah that sucks... thanks for the reply, what do you use to glue it in and is it easy to take the motor apart? also have you tried any other type of torqueboards motor? i have only tried 6374 190kv, i wonder if they all have this type of issue? You would think the motors would atleast last some time before this happens but this has happened to 3 motors in the same week for me
no problem! I have tried 2 6355's for a friends build and one of them had a slight clicking since day one.. so ive lost my optimism! I use loctite superglue ultragel control but im sure there is a better option! Check the esk8 builders forum for advice on adhesives! Feel free to give me a shout if theres anything else i can help you with!
okay thanks so much will do
Hey how did you get the motor apart to put the glue in lol, we are having some serious trouble getting it open, do I have to take out the 4 tiny Alan screws too?
I had a similar sound in my motor. The magnet retainer ring spun and the magnet fell out of place
Yeah unfortunately I had like 5 magnets come loose lol. And another one of those motors just died on my the other day for the same reason. Likely switching to something else soon!
Saw the flame and thought there goes the cat. Then I read the mod list. 👌🏿
LOL thanks dude. yeah this thing is my baby!
Questchaun a little late 😂 but if you have a high flow cat further back that’s metallic based it’ll eat the flames and be fine, the ones that get all fucked is the cats that are right off the turbo/ oem ones
Hey man, awesome build - 1 question tho - did you had any issues with rod knocks, piston slap, oil issues or anything engine related since you've bought it ? I keep reading about those engines going toast or atleast the 1st batches (few months) of the 09 production year. I'm asking because I'm on the look for a 09 subbie for 1/4 racing and track use. Also - could you give me any hints/tips at what other issues I might expect with this vehicle ?
hey man, im not gonna lie i have had the best luck of anyone i have seen and ive only had teh car modded for 50k miles and there are 100k miles on it total. Truth be told, your 5 speed WILL die if you intend to actually use it for road course use or drag strips or auto x. If you want to have a little bit better experience get an STi.. but honestly my car is for sale right now becuase i am considering moving into an evo x lol. It doesnt have any oil issues at all but because i had to make a makeshift reservoir for the coolant sometimes it will push out the res and need to be refilled.
RiSER DimitroV haha no problem man, far too many youtubers are too lazy or too good to respond! Ya know, there is nothing perfect in this life, but I guess in actuality the WRX has been pretty fuckin good to me with all things considered! Be gentle on the transmission and run a softer clutch and don’t waste your money on blast plates for the trans. I had them. They’re a gimmick. But man be good to her and have fun and she will be good to you too! Let me know what you decide to do!
Aye, I'll have to give it a good thought - there's one currently for sale near me, 80k miles done, 09 year - magnesium rims (te37 look alikes), mint interior and service history. It's a tempting offer, just not sure if the engine won't shit on me if it's from those 1st batches where they had rod knock and other issues. Car is June production date. Thank you kindly, again, for giving me your outlook on things.
Of course! Truthfully if you feel equipped monetarily or have the experience, you should really consider just dropping an IAG or comparable pre built shortblock into it if it dies. If i keep mine that will be the plan.
what was your top speed?
ya know im not really sure. my telemetry had problems so i couldnt implement it in this video. i would say maybe 115?
Austin Murray good stuff! Are you going out there 28th?
Ron Inscho thanks! We had hoped too and finished some oil cooling related mods for the car earlier this week but I believe it is going to conflict with a vacation :( I am also not familiar with nasa and how their events are structured. What’s the procedure with them vs just track it?
Austin Murray you are probably solo qualified. I am not sure. This will be my first time so I have to have an instructor. I have to show my ability before being allowed to solo. I've driven Talledega once at 160 and many dragstrip races in a Z06. But, that doesn't count for them.
ahhhh I see. No actually this event was my first time driving a road course lol. No one needs to know that though haha. My dad has raced barber for a few years and I've been on the course numerous times so it was kinda just like clockwork once I got out there! But I'd love to see you at an event soon. My schedule is about to get crazy because of college but if you would like to send me a friend request on facebook, we could communicate and try to find an event that fits with both of us! I would like to start working my ass of to get to instructor status in a few years. Seems like a legit gig. Give me a shout though!
Were you in the green group? Was wondering if you caught a Blue RX-8 sliding in front of you on Sunday.
on saturday we were intermediate and sunday green. I cant say for sure but your car definitely looks familiar!
i have to wonder how you even found this video lol im not exactly a popular youtube channel lol
Lol i searched barber like a week after the event
Gotcha! You planning to be at road Atlanta July 21-22?
Good run, guys! Those were some smooth laps, Austin
Thanks!
Sounds sweet mate im loveing my 2009 wrx narrow body im thinking of getting a new exhaust for mine keep up the good vids
Thanks dude! yeah if you have any questions about exhausts please just ask! I have a video really showcasing the invidia quad tip q300 that is on this car if you haven't already found it! Also be looking for a 370z track day video I will be posting in a few hours! I laid down some strong lap times for a first time event!
Austin Murray thanks pal drive safe bro much love from the uk
@epilepsy