วีดีโอ

Ha, I just ordered a brand new trim motor for my Suzuki $98.

If you still have trim motor I buy the I need one

Why is it that all Americans, when talking on TH-cam videos, all sound like they’re talking to a classroom full of 5 year olds? 🤔

I’m getting ready to tighten my packing nut but if the leak doesn’t stop I’ll replace the packing. I replaced the packing in my driveshaft stuffing box while in the water and it was no problem but I am reluctant to do the same on my rudder as gravity and the weight of the rudder might cause problems, like the rudder might slide down or I might get too much water resulting in an unscheduled haul out. One thing you should do different is, don’t use a pipe wrench “monkey wrench”, a pipe wrench is for pipe. Always use two large crescent wrench’s when working with brass packing nuts. Save the pipe wrench for your galvanized pipe going to your house. Otherwise good video thanks 🥴

The easier way is to: 1. Set the motor on the “trailer lock” 2. Remove the cotter pin of the tilt pin. 3. Remove the tilt pin. 4. The whole trim assembly can now slide forward towards you so all you will need to do is remove the 4pcs 10mm bolts of the PTT motor.

Best way I found to cut the packing bring up a little 2x4 or 2x6 with you and a hammer and a chisel put the chisel on it and it with the hammer bam you won't get any of the strands peeling works out better

Thanks for sharing! Excellent instructions!

a źxzzplZLPZLŹSKz sz alLZ PL LZAA L ⁰ ☆p!⁹00

your video is misleading... your title state you are replacing the motor not the whole dang pump unit...

Looks great other than the engines. I though they were originally equipped with 225's and some went with 250's on upgrade? Curious how she preforms with those engines. Great looking boat!

very interesting video! I would't let this guy to work on our props. while in the water!!!

Will that tilt motor fit my 08 suzuki 140 df140?

no sealant for the screw holes? With lip down seems like you are inviting retaining water inside the rub rail.

in another video they bent the track around those tight rounded corners.

Use a wood screw and drive it into the packing. Use pliers to pull.

Is every accessory on this boat $400 😂

Is this boat still for sale?!

Pretty sure that switch on the bottom inside of the bracket is a ignition safety switch that doesn’t let you start the motor unless it’s trimmed down.

A 225 is too big for a boat like this. 200 is max recommendation

Gracias!

How much are you sale your boat sir please

Underpowered

I tend to not trust a mechanic using badly rusty tools but I guess that's just me .

thanks for the video. i am a first yr boat owner so this was a good starting point for me. I have a 2008 330 sea ray and have a leak on both rudders. Pulled boat out first wk of December. Against my better judgement I also used a pipe wrench that i cut 8" off the handle to be able to get a half turn on it. i pulled the nut off and found 4 full pieces in the packing nut. they didn't seam damaged but they were dry as a bone. Hope to finish job by next wk

You can remove the tilt motor on a DF150 2014 model by tilting the motor all the way up, then knocking the pin out of the tilt ram and the assembly moves forward enough to gain access to all 4 bolts on the motor. I just did both of my engines, tool an hour to do both. Not sure if the 175 is any different but hopefully it helps someone.

Haillll yes!!!!!

rarding to PACKING TOOL - prob. use somethng likea dentist Scrapper.

Made me nervous cutting on the boat

I’d place the Egret powered by a Yamaha at the top of the list of best flats boats in the world in my opinion

Very cool boat. The seats look very comfortable.

Please let me know if you have any other vessels for grabs thanks with price please thanks

Need to know the price for a boat about 15 years old to date am interested in purchasing one thanks

How much do you want for the boat

Hello frem Denmark. GREAT video by the way.....I own a sea ray 340 - 2001....and both rudders are leaking a lot, and can't tighten the nuts anymore. Whats the size of the greased packing, and did you tighten up the lower locking nut to the bottom of the upper nut.? Stig Christensen, Denmark

Pero cuanto es el precio plis

Please tell me this is a joke. If I brought my boat to get the rub rail replaced and they called me and said it was done and this was how it looked when I picked it up I would make them pay me money for wasting my time LOL . Do yourself a favor get a heat gun at your bends heat it up a little bit make your bend and then put your screw in. Have you ever seen another rub rail that looked like yours? The answer to that is probably no usually it’s one solid piece not 65 pieces cut up all together. And you didn’t fill in your existing holes 🕳! You realize behind those holes is a piece of wood that holds the top Cap of your boat on and that is now definitely going to be rotten very quickly

what could be the value of this boat

Hahahahah this guy needs to learn how to install rub rail before he puts up a video of how to install rub rail

hey Man what a job!!! I can't understand how Zuke got it so wrong, Yamaha's you can remove the bottom shaft and the all thing comes out. I need to replace the reservoir on a 150 Suzuki I will try without removing the bracket, too big work. I was replacing the swivel bushes and finished the second engine in the dark and got the tilt sender push arm from the swivel side that made a bad dent in the trim reservoir as I was lowering the engine back in place to install the swivel tube. Was too happy with my job so far having replaced the bushes on the swivel tube and the trim push rod bushes + replacing the trim sender (easy job with the engine pulled away and also re-tapping the steering column grease nipple and fitted new one. Now I feel bad having to take the all shit apart again I guess working alone without forklift and in the dark I was calling for trouble. Thanks for your video, was looking for this info as I did this job before on Yamaha's and the trim tilt assembly comes out without removing 1 side bracket and just removing the bottom shaft to one side.

😂😂

great boat

I would of used some 5200 on backside of track and on screw holes to seal.

Why is he eating his Mike?

for 1500 hundred hours they run like new

nice team, the fishing in south Florida is intense

Good Info

Just wonderful, I have been researching "where can i find boat registration number?" for a while now, and I think this has helped. Ever heard of - Siyichael Mysterious Smasher - (should be on google have a look )? It is a smashing exclusive product for discovering how to get a cheap boat title report without the headache. Ive heard some interesting things about it and my co-worker got great results with it.

My 1987 Wellcraft Tropez needs to be done as well. What size packing do i need? Looks identical to yours.

It's a very good boat..

Very nice. Who makes the T-Top?