วีดีโอ

Know this might be a dumb question, but if I used this antenna, I wouldn’t need the magnet mount if I used this off a balcony? Would I need a counterpoise? I am on the 3rd floor and get pretty good reception but what I have now is just a receive antenna. Thanks.

t1000e have a serious bug not receving messages 1 hop away - also when its turned on there is packet loss from nodes arounds .. too bad ..

I wish I would have seen this one sooner. I like that it has backlit buttons. I have three nice portable multi-band receivers and none of them can be easily used in the dark. Oh, and today there’s a coupon and Amazon has it for $60.

I made one a few months back using cat 5 cable cut to 33ft thrown up in a tree using a water for a weight (with water). I had a nano VNA for tuning it. I ended up cutting abt 2 ft off of it to get it at 1.2 in the 20m band at 1.4 on the edges. The 10m band was flat 28 to 29.7 at 1.1 swr. I tried using it at other locations and it would nut tune as well as it did at home up through the tree. And I did not want to alter it. But it was useable at other locations. It just liked my tree better. since I have put in an 80m efhw.

Thanks You.

Most urban interference is vertically polarized. It starts random but the horizontal portion strongly couples with the ground and gets attenuated. This gives horizontal antennas a noise advantage right off the ball. Next laying an antenna on the ground reduces the signal by about 100dB and the noise by about 140bB, increasing your signal to noise ratio by about 40dB (these figures were for a Beverage on the Ground) but the loop should be similar.

Unprocessed data shown problem is shown in wxtoimg while receiving the image then what is the solution for this

Excellent review. Radiodiddy has excellent customer service and I expect many more great ideas from them. I really like the G90 radio.

That poor guy. What a life. Drugs, spanking, screaming and jerking😢

What about GMRS? Similar properties to CB radio, repeaters can give good coverage for hand held radios, uhf antennas are much smaller than CB or HF ham, and a non technical untested licence covers your whole family.

Do you have a link from the Yagi antenna in this video. Thx

I will not contribute to the $54B man’s salary. No Tesla. No Starlink.

CB radios are now made using FM instead of the old AM modes. This makes the CB radios MUCH quieter than they used to be. Most of the hiss and pop and white noise is gone from CB now.

Great Stuff Danny - curious about the lantern radio

Thanks for the video. Now I know why I am not able to hear much here with S9 noise. Expected signal strength on most bands is S6-7. 73 Jon, VU2JO

So much of this is way over my head. Is a higher dbi antenna always better?

Your vid is short but informative! I saw another vid where a gent spent TOO much time on the manual!

Hello, I will give you my opinion on this radio which has good and bad. First of all, I know that when Amazon France delivered this radio to me, I had the unpleasant surprise of seeing that some segments of the screen were not functional and that the frequencies were difficult to read. So I was forced to disassemble the radio and by switching the contact product on the small pink bar and on the card, I was able to recover all the scripts. Here is my personal opinion on this radio which has to start with a very good FM reception and even better than my XHDATA D-808. I think that the Bandwidth function has a lot to do with it as on the famous Quodosen dx-286. Regarding AM (MW) I find the original reception awful but fortunately I found the solution to change the internal AM coil on a RETEKESS V115 and really, I have considerably improved the AM reception like the reception of TALK SPORT (1053) or CAROLINE (658) while I am in France. The AIRBAND is not too bad but I regret a huge background noise between each connection of the pilots. If you want to listen at high volume to the exchanges, you will surely be bothered by this. In France the VHF Band is of no use to me any more than the VB band. Like many of you, I would have preferred a good SSB. I also report a bug that I noticed, sometimes it is impossible for me to restart the radio and the screen starts flashing. I have to remove the battery to restart the radio. I also regret the absence of RDS because for a radio of this price, it seems to me that it was the least of things. the MP3 player is nice and the fact of recording the radio is good. I would also have appreciated a built-in microphone for the Voice and conversation recording function like on the Lijiani RD239. I also regret that during MP3 playback, it is impossible to see the titles of the songs and the name of the folders appear. In summary, I would say that it is a nice radio but still at an abusive price with certain defects like that of the screen or the low MW reception and the absence of RDS and SSB

The first example you used around 3:50ish sounds an awful lot like the Desert Oracle podcast guy...to me anyways.

Thank you very much for such a simple walkthrough bro, was doing circles trying to get these units to work by other means!

Feeney Knoll

Nice! Now, I want to get one.

You say "Veh-vor" I say "Vee-vor" let's call the whole thing off! Nice viddy!

Good video, might have to get myself one.

Cool product. Great review. Thanks.

Great video

Interesting- I’m thinking of all kinds of ways to use this.

Thanks Danny, great review!

very well done---like a professional

Thanks for the great review.

🔥Get your Vevor Ultrasonic Cleaner here: s.vevor.com/bfRebn Use Discount code: VEV5OFF

I couldn't get anything on mine I tried a V3 433mhz and a V3 868mhz

still wont work for me. Windows 10 RLT-SDR v4 and SDRuno 1.42. The terminal says the donggle is recognised but the software is not launching.

it would be good to have Meshtastic AND TinyGS on the same device and be able to send text message from Bluetooth phone to the private Meshtastic node into TinyGS, store-forward message via satellite to a similar setup at the other end or a simple web dashboard at the other end which is simple to use. This would be a great help as a very simple emergency message transmission to the other end from deep out in the field. Garmin have a similar paid for service but its propriety.

I think someone was talking but the generator was mic’d up well 😂

what it for? What does it do?

Would a chain link fence interfere with the signal?

Totally disagree on the price. Seeed it’s a really good product, ready out of the box. But if you diy your node for like base station. Definitely diy is cheaper. Just don’t compare seeed studio price with amazon prices. Cheap aliexpress prices

What's battery life on the T1E like? Havent seen anyone mention that yet

1081 Bethany Burgs

I get as far as flashing the unit and have a nice display that says to connect but iPhone does not see any new BT device. I have the Meshtastic app but how to connect and continue the setup?

Flasher

For lurkers, if you're on Linux and cannot connect using the web flasher, then its probably permissions to /dev/ttyUSB0

Na minha avaliação, os pontos consideráveis são... Pontos positivos: Tamanho compacto. Teclado iluminado. Som relativamente bom pelo tamanho. VHF/UHF de 25 a 999. Recepção boa, mas perde pro XHDATA D-808 por exemplo. Pontos negativos: Filtro de banda só em VHF/UHF e (FM, que não faz sentido nenhum ter). Muita interferência em FM, mesmo de emissoras com sintonia bem distantes. Consumo elevado de bateria (comparado ao XHDATA D-808 por exemplo). Knob de sintonia em uma posição ruím e com barulho incômodo. E o principal, o inacreditável, bem pior do que não ter SSB, ele tem squelch só na banda aérea, nem tô acreditando, se eu soubesse desse detalhe, não teria comprado!

Awesome sharing, thank you

I have the USB GPS working fine - is there any way to get sub nanosecond accuracy with the USB version or do u have to have the serial version?