วีดีโอ

One side to the negative bus bar and for the hot it's on the nav / anchor light which are attached to each other by jumper. I didn't want it on all the time and figured if the nav lights were on it'd be good to have the camera running.

@@myrondmorrow love the idea just wondering how you attached it to the switch. By jumper did you get an adapter to attach to the switch ??

@@jaredzeno Oh I gotcha. I clipped the original connector and then wired both wires together with a new connector. Works great. It's a low voltage item so power wise it was totally fine to do.

Awesome thanks !

You bet. It has vertical adjustment within the housing. For left / right, I would recommend not tighten down all the way until you hook up to the MFD in case you need to put a little pressure one way or another. There's enough play there to get it perfect. We have a ton in stock so feel free to get with us as soon as you're ready to pick one up. www.nightvisionoutfitters.com/products/sionyx-nightwave-marine-night-vision-system?_pos=1&_sid=c56c5f7f4&_ss=r

It's definitely worth having, especially with radar. Just the other night we went to eat supper at another marina across the lake. Coming back we had a boat anchored with no lights and a no wake bouy that the light was burned out on. The radar picks that stuff up, but that bouy was in some chop and really didn't paint on the radar much at all to notice. It was plain as day on the NW. In the grand scheme of it, it's a really cheap safety feature and worth having. I like lumitec UW lights on my boat too and they're nice for sure, but I would do the camera first if it were me. We don't use the underwater lights all that often, but they are very cool when you do.

This is great- Thank you

I believe it will. It appears the 1833 at least has video input and if so no problem. It'll hook up to any chartplotter that has the ability to input and display video.

I think you can change it within the settings of the Garmin. We can double check next time we're down at the boat.

Correct. You can fix it on the sionyx app, or on the mfd display. Common issue though for sure.

Thanks for the question. They don't specify and we did some research and were not able to find that spec. With that being said it is very low draw and uses a thin gauge wire. We have not had any issues with battery drain on our current boat, and with leaving it on for long periods of time.

@@nightvisionoutfitters Thank you sir. I have not been able to find that spec either.

At slower speeds it should work very well. I might add one to our hunting jeep and give it a try. It doesn’t pan and tilt like the night ride thermals but purely for getting around I think it’ll do the job fine.

If you're referring to the M250 XR with the 60mm lens, then no it won't work due to the large lens. It will work for all the regular size Patrols though.

@@nightvisionoutfittersllc2069 it's 19mm. I want to buy your product and the Trijicon but have less than two hour battery time is ridiculous for a product that costs almost $10,000.

Personally I would chose the NOX. Cheaper, adjustable focus, onboard rechargeable power, lighter weight, longer warranty. There's really not a true reason to choose the Trijicon over the N-Vision.

7001 is the green laser and 7005 is red. I the red is discontinued and I think the green one too pretty soon. Someone on Amazon and eBay is fire selling the green one for $99.99. I picked up two. I was pleased with the build quality of my first one.

@@trollzone1 Hello Troll Zone, The Laser Sight that you got from eBay, bo they have the 2 Black Screws ? or do they have the 2 Silver Screws with separate squared witness lug ? Please let me know ASAP, so that I can make My decision to buy one. Thanks again, Allan

@@allandonguines5991 mine are silvery in color but not as silvery as the box. I wouldn’t call them black.

@@trollzone1 would you please send me a picture of it ? I highly appreciate. Because I think the Silver Square Screws is the one that will Fit in to My Taurus G2C Pistol. Thanks so much, Allan

Steiner products are built in the USA and in Germany. Not in China at all.

Not made in China.... Great news! I ordered one today. Even though I think I would have preferred 700-800 Lumens. I hope 350 Lumens default to brief 1 minute 470 max Lumens will be right choice for home defense if ever needed.

Well that's a start. So where is it made then??

@ no avail: I read China. So instead I got a Steiner TOR Fusion Laser Pistol Sight with White Light and Green Laser #7001 made in Germany

What makes you say that?

@@coyotehunter8226Ambiguous wording on the Washington state website. Got any info?

It can be powered externally. AGM can also service the internal battery.

If it lasted a whole day then it's working correctly. Sleep mode still drains battery, just not as much as active operation. Any 5V usb battery pack will work. Anker Powercore 10000 is a good, reliable one. As far as the internal battery goes, it cannot be replaced at home. It would have to be sent in to AGM for them to swap the internal battery.

Not that I'm aware of. Your best bet, since you already have the G24, is a wilcox modular bridge. That way you're only getting it on one side and effectively creates a dovetail to dovetail J arm.

Hey Jesse. Currently we would not recommend the Breach. Flir is no longer offering products to the market and no longer supports them. Wouldn’t be a good choice currently. If you’re wanting a head mounted thermal then it’s best to save for an N Vision Nox18. If looking for just a spotter then we’ve got plenty of comparable priced options to the breach. Shoot us an email at sales@nightvisionoutfitters.com and we can help.

@@nightvisionoutfitters Is this statement still correct considering its for sale on their website currently?

@@tikityler1386 Yes we stand by it. They can still be bought sporadically, but FLIR is no longer serving the commercial market and support is non-existent. There are much better options from other manufacturers currently.

This was a prototype/pre-released NOX35. The production unit is same image but a little more refined overall.

True. We do not carry ATN products.

@@nightvisionoutfitters Well, if I plan on getting something else, will keep you in mind.

@@williamgaines9784 thank you sir

No, they are not exportable.

@@nightvisionoutfittersllc2069 Thanks for reply, Do airlines let it ship?

Not on the NOX. This footage was done with our phone adapter. The new HALO-X series does have built in recording though.

@@nightvisionoutfittersllc2069 what phone adapter are you using?

Yes sir, that's correct.

That’s great, What’s the make and model of the drone?

@@lukeweaver1002 It's a custom 3DR Robotics Solo with a FLIR Vue Pro 640 camera. We built it in house. It's since been sold and we're currently running the new Autel EVO 2 Dual and will soon be testing the new DJI Mavic Enterprise 2 Thermal. For the price point the DJI is very attractive. The Autel though is 100% USA built and supported, but is a little more expensive.

Very cool! Appreciate the comment. We've got quite a few of them in stock so good chance you put some of those together.

Hello There, I noticed that there's a couple Models of this Particular Laser Sight and Light Combo. One is the Steiner eOptics TOR Fusion 3R Laser Sight/LED Handgun Light, and the other one is the Steiner TOR Fusion 7001 Model. So, anyone can tell me at your earliest Convenience if what's the Difference between the 2 Models ? and which one is Better ? Thanks in Advance, Allan

Hello. I love this product but the screw was lost first shot which is right-left setup screw. And I did not find. I send a e-mail Steiner customer service and I am waiting.

@@allandonguines5991 ones green laser ones red

@Tyrone Buggums and red is discontinued

Not really. Take a look at the N Vision Nox 18 for that purpose.

Yessir. They shift left and right quite a bit.

@@nightvisionoutfitters Hey ! I just bought a Bobro Pulsar mount from you guys :) Mayor Fuglycool

Right on! Thank you sir. We’ll get it to you as soon as we can!

@@nightvisionoutfitters Thanks guys ! Love the site, gonna have fun with my Trail 2 LRF XP50 in my next videos :) Mayor Fuglycool

michael ochirbat they do. In fact an even better one. Check out the new NOX 18. www.nightvisionoutfitters.com/products/n-vision-optics-nox-18?_pos=2&_sid=56999256c&_ss=r

Yes sir, no issues. Ultimately plan to change the barrel on this one and put a can on it.

no sir, it's a handheld only.

Hi Maggie you ordered the incorrect mount it sounds like (not from us obviously or we would have given you guidance). A standard B300-200 won't work with a Thermion because of the issue you mentioned. You needed the Bobro Thermion Mount. Bobro is a far superior mount design so far as return to zero in compared to ADM. Many independent tests have confirmed this. ADM is a good mount, but for the thermion or any other 30mm thermal scope, you do not want a cantilever style mount. Here's the correct mount that you should have purchased. We have mounted at least a hundred Thermions in these mounts so far. www.nightvisionoutfitters.com/products/bobro-engineering-pulsar-thermion-qd-mount?_pos=1&_sid=0846f0ba2&_ss=r