วีดีโอ

Solder temperature was low at the beginning! The solder must reflow unto the tip for optimum result. Use solder paste if available for faster reflow. Always clean the tip of your soldering iron of solder gunk for best results. A long five seconds solder reflow is safer than multiple 2-3 seconds applications. And don't use electrical solder lead which has high melting temperature but use a rosin filled 60-tin/40-lead solder or better low-temp electronics kind. Also apply heat and solder at the terminal at the same time. Let the solder melt and flow at the terminal before removing the heat.

Try cleaning the solder iron tip. I use sandpaper or a fine metal file.

Will this same method work for denon dra800 H AV reciever? Seems to me that its a common problems with display going on Denon recievers? Not good really especially as the equipment is quite expensive!

Sir u are brilliant. the intro was more than enough to make me keep watching. your humor is impeccable, i applaud u.

Your soldering iron probably not getting hot enough for non-lead based solder

This hurts to watch. I'm no professional but do work on quite a bit of equipment. You need a much better solder gun and use a smaller diameter solder.

do you have a link for the fuse?

aw man rip as soon you got the mp5 again then there was power outage i give you follow as your offline

🌸 'PromoSM'

Hey, quick question. How did you do a factory reset on the receiver or remote to make the remote work again?

Please make it a series my dear friend :) It was so super epic and so wonderful to watch :)

What the flux is going on here?Seriously tho thank you very much for taking the time to post, you saved my junkyard receiver. Pro tip, watch some yt videos on soldering, I did and I'm much better at it now, although you'd still laugh at me. In any event, major props for saving my junkyard find.

where are chapters 1 to 3?

Talk to match in idiot

We need more flux! xD

I have never seen the need for a lot of de soldering tools. Every time I have soldered if you spin the iron after you get the solder hot it usually takes the solder with the iron. Have I been crazy lucky or???

Never use lead-free solder it is crap and for a novice, it will just make things that much harder. Also never use a solder designed for pipework it has acids that can ruin a circuit board. yeh so if you had used the correct solder you would have had much better luck, live and learn I guess.

*Video is better than other receivers⤕>**lnfo.help/Amplifier?ч ** I’ve had in other rooms, and sound is good, although sometimes you have to crank it to hear the broadcast. For what I paid, I’m quite happy!*

Thank you very matsch👍

I love that giant pipe solder - this is hilarious, but thanks for the information!!!

FLUX FTW

Hi i've watched through tear stained eyes! the minimum you end for soldering is... a good quality iron ( which you have) a ball of brass wool, pcb flux pen And solder wick to draw off the old solder You are attempting to solder with everything dirty.. you need to heat the iron then wipe it clean in the brass wool then the tip will be shiny. then start afresh WITH FLUX hope this helps.

🤣😂🤣😂🤣😂if you dont know how to use a soldiering device leave it to profecionals, because trying to work with those ridiculous gloves, just getting in the way . I do this every freaking day for 35 years and never burn my finger like that.

On you second setup, that pin is a comparator, it's waiting for a known value +/- to stage an operation.

Это жах!!!

Your big mistake was a 30w iron rather than a 60w. Same price! And use flux core solder. But your video was a big big help to find where the fuse was.

Thanks for posting. You gave me the confidence to try my novice hand at soldering. Fixed the display, hope it stays that way. Thank you!

FYI that mask will do nothing for you, “O” donut, zilch. That’s a particulate mask not a vapour mask, and the smoke would be a ... Bueller, anybody... a vapour. Good for fine dust or someone coughing on you etc... Just if your going to encourage viewer to wear PPE then you might as well do it right. Cheers

Just a quick tipp form an electrician, no hate just some advice for next time, soldering isn't about dripping the tin on top like you are doing, you really don't need really much. You should rather try and heat the contact with the iron and hold the fresh tin strip on the contact, then let it flow through the hole by itself. (The whole procedure should be done rather quick to avoid heating up the components to far.) That way you get perfect electric contact, because 100% of the remaining and the new tin get melted and merge, which leads to a smooth structure without any interfering spots within. That way you will achieve the same looks as the factory solder spots! The way you are doing it, it is called a "cold solder spot" which is not optimal because the electric contact is limited, which leads to malfunctions because the spot gets heated up by the current and the fuse triggers. The solder spot is more vulnerable to mechanical stress to. Practice with a wire and some old electrical rubbisch or something, you will see the tin easily flows into the contact by itself, generating a perfect contact and the whole thing is done in a few seconds. By the Way, soldering tin has got some "flow-boosting" substance in it, which gets boiled away when soldering, so the longer you fight with a soldering spot, the more difficult it will get and you will need to add more new tin to "keep it creamy". Anyway thanks for the video, helped me a lot to fix the display of my X1100W!

hey man, I just found your vídeo, it's been about a year now, how's the Receiver? mine is doing the same thing, the 200mA fuses (yes, plural) i've tried lasted only a couple of days, tops... I'm really thinking on doing the direct link

Did this exactly. Worked for one day. Display out again. I hear Denon service replaces a capacitor as well.