- 47
- 286 998
Jordy Builds
United States
เข้าร่วมเมื่อ 30 เม.ย. 2021
I like to build stuff
Razor MX500 Build Part 2 - Jordy Builds
Hey guys! Today we go over the razor mx500 for part 2! We go over everything on the bike so far and do some riding.
Here’s a link to all my socials and contacts🤟🏻.
linktr.ee/jordybuilds
Here's a Parts list of everything mentioned in todays video. If I missed anything please let me know!
For the batter email Allen@amorge.com or
WhatsApp is the best point of contact
+86 134-2899-9880
My battery size is 7.5'' Long 6'' Wide & 8'' Tall
Motor 48v 2000w no bracket: shorturl.at/C8tFX
Plastics: a.co/d/dtSihYS
brake kit I'd recommend: electroandcompany.com/collections/brakes/products/razor-4-piston-hydro-brake-kit
Other Razor parts: www.amazon.com/shop/jordybuilds/list/5GDTAD6VYAOA?ref_=cm_sw_r_cp_ud_aipsflist_aipsfjordybuilds_NRGY3HQYBM78QDDPRRBF
(some of these parts are affiliate links which means i can make a slight % if purchased through the link! Thanks)
Here’s a link to all my socials and contacts🤟🏻.
linktr.ee/jordybuilds
Here's a Parts list of everything mentioned in todays video. If I missed anything please let me know!
For the batter email Allen@amorge.com or
WhatsApp is the best point of contact
+86 134-2899-9880
My battery size is 7.5'' Long 6'' Wide & 8'' Tall
Motor 48v 2000w no bracket: shorturl.at/C8tFX
Plastics: a.co/d/dtSihYS
brake kit I'd recommend: electroandcompany.com/collections/brakes/products/razor-4-piston-hydro-brake-kit
Other Razor parts: www.amazon.com/shop/jordybuilds/list/5GDTAD6VYAOA?ref_=cm_sw_r_cp_ud_aipsflist_aipsfjordybuilds_NRGY3HQYBM78QDDPRRBF
(some of these parts are affiliate links which means i can make a slight % if purchased through the link! Thanks)
มุมมอง: 1 868
วีดีโอ
Razor MX350 36V Overvolt Kit Install & Test Ride - Jordy Builds
มุมมอง 27K5 หลายเดือนก่อน
Hey guys! Today we Overvolt a customers Razor MX350 and also go over installing the Jordy Builds 36v Overvolt kit! It came out great and im super excited to be able to offer this kit to you guys! Here’s a link to all my socials and contacts🤟🏻. linktr.ee/jordybuilds Here’s a link to the 36v Overvolt Kit! jordybuilds.co/products/36v-800w-overvolt-controller-with-throttle Here’s a link to a 36v li...
Razor Bellezza 48v OverVolt Kit | Jordy Builds
มุมมอง 2.4K6 หลายเดือนก่อน
Hey guys! Today we start my Razor Bellezza build and also go over how to install the Jordy Builds 48v Overvolt kit! I’m sure the build will change over time but I’m super stoked to start this build! Here’s a link to all my socials and contacts🤟🏻. linktr.ee/jordybuilds Here’s a link to the 48v Overvolt Kit! jordybuilds.co/products/48v-overvolt-kit?ToPasteboard Here’s a link to a 48v lithium batt...
Razor MX500 Build Part 1 - Jordy Builds
มุมมอง 2.2K8 หลายเดือนก่อน
Hey guys! Today we start my Razor MX500 build! I’m sure the build will change over time but I’m super stoked to start and commit to a full build! Here’s a link to all my socials and contacts🤟🏻. linktr.ee/jordybuilds Parts list: Forks: amzn.to/3TDqMQF Fork Clamps: curbhoppercustoms.com/products/45-48mm-triple-clamp-kit-v2 Shock (190mm) : amzn.to/49Wz0cn Brake: amzn.to/4afFqDd Plastics: amzn.to/3...
How to Install Disk Brakes on Razor MX350 First Gen
มุมมอง 4.1K9 หลายเดือนก่อน
Hey guys today we go over the install for the Matric Disk Brake adapter kit for the first generation mx350. Message Matt here to order disk brake kit: matric_cali?igsh=ZDNlZDc0MzIxNw He also makes them for the pocket mod, newer mx350, etc! Brake and rotor used in video: www.amazon.com/shop/jordybuilds/list/15X29J8TTIMP9?ref_=aipsflist_aipsfjordybuilds (this is a affiliate link) Ch...
Crazy Cart XL Voltage Gauge Kit
มุมมอง 5369 หลายเดือนก่อน
Hey guys today we go over the install for the NEW battery voltage gauge for the crazy cart XL! If you are interested in buying a Gauge kit, they are listed here. jordybuilds.myshopify.com/products/crazy-cart-xl-gauge-kit?variant=47592419131706 If you guys have any questions please feel free to comment or on my website there is a contact form as well! Follow me on Facebook to stay up to date on ...
How to Weld your Razor Freewheel | Jordy Builds
มุมมอง 1.7K11 หลายเดือนก่อน
How to Weld your Razor Freewheel | Jordy Builds
Crazy Cart top speed adjuster for Jordy Builds controllers
มุมมอง 78711 หลายเดือนก่อน
Crazy Cart top speed adjuster for Jordy Builds controllers
How to install 48v Jordy Builds Controller on Crazy Cart XL
มุมมอง 1.1Kปีที่แล้ว
How to install 48v Jordy Builds Controller on Crazy Cart XL
Crazy Cart Battery Gauge Install - Jordy Builds
มุมมอง 2.5Kปีที่แล้ว
Crazy Cart Battery Gauge Install - Jordy Builds
Installing RSF 650 Wheels and Zoom Brakes on my Razor MX500
มุมมอง 3.6Kปีที่แล้ว
Installing RSF 650 Wheels and Zoom Brakes on my Razor MX500
Electric scooter 48 Volt upgrade - Super Turbo 1000 Elite
มุมมอง 4.7Kปีที่แล้ว
Electric scooter 48 Volt upgrade - Super Turbo 1000 Elite
Crazy Cart Controller & Tool Battery Adapter Kit Install - Jordy Builds
มุมมอง 4Kปีที่แล้ว
Crazy Cart Controller & Tool Battery Adapter Kit Install - Jordy Builds
Razor SX500 Build Part 1 Vevor kit & Paint - JordyBuilds
มุมมอง 1.6Kปีที่แล้ว
Razor SX500 Build Part 1 Vevor kit & Paint - JordyBuilds
How to Wire a 48v 2000w Vevor Kit - JordyBuilds
มุมมอง 15Kปีที่แล้ว
How to Wire a 48v 2000w Vevor Kit - JordyBuilds
How to Trim Razor SX500 Plastics - Jordy Builds
มุมมอง 1.7Kปีที่แล้ว
How to Trim Razor SX500 Plastics - Jordy Builds
Razor Crazy Cart XL running on drill batteries (Milwaukee) - JordyBuilds
มุมมอง 7Kปีที่แล้ว
Razor Crazy Cart XL running on drill batteries (Milwaukee) - JordyBuilds
Milwaukee powered razor mx350 top speed test - JordyBuilds
มุมมอง 44K2 ปีที่แล้ว
Milwaukee powered razor mx350 top speed test - JordyBuilds
How to make a Razor Mx350 run on Drill Batteries - JordyBuilds
มุมมอง 81K2 ปีที่แล้ว
How to make a Razor Mx350 run on Drill Batteries - JordyBuilds
JDM TYPE R Front End Swap Acura Integra 1994-2001
มุมมอง 7K3 ปีที่แล้ว
JDM TYPE R Front End Swap Acura Integra 1994-2001
AEM short ram intake install - Acura Integra GSR
มุมมอง 6K3 ปีที่แล้ว
AEM short ram intake install - Acura Integra GSR
How to install coilover on a Acura Integra ( 1994 - 2001 )
มุมมอง 4.8K3 ปีที่แล้ว
How to install coilover on a Acura Integra ( 1994 - 2001 )
Thank you I just ordered the kit and the 20ah 36v battery
What charger do you use to charge the battery
Battery comes with a charger
How long before you have to re charge it
and can the battery be a 36v 360w lithium battery?
does the controller work good with the stock motor or will it explode or something over time?
Works great with the stock motor there’s always a chance of it burning up eventually when over volting but not common at all with the crazy carts
Batteries? Whats Your opinion, durability, etc, etc. Been considering one..72v. Suggestions? Thanks
I want to do this exact upgrade plus the battery gauge but your store is out of 2 pins Milwaukee adapters will the 3 pin and 4 pin work I’m not understanding what those options are for?
I’ll updated stock now
@@JordyBuildsthe 2 pin option is the one used in video correct?
I see now it’s an option on the controller too I just sent in an order thank you brother
Thank you boss!
Please tell me the tire specks
WHERE U GET THE BATTERY I CAN RUN MY FLIPSKY TO PROGRAM MY MOTORS WITH OUT BLOW THE BRAKER THATS 32AMPS ON MY BAT WHAT SHUOLD I GDO MY CONTLER WAS 25AMPS BUT THE FLIPSKY SAYING 60AMPS IS GOOD FOR WHAT MY MOTOR IS BUT THATS TO MUCH FOR MY BAT IF ITS ONLY GOT A 50AMP BMS SO THAT MEAN WHAT IT CAN ONLY PUSH 50AMPS RIGHT OR NO IDK ITS 52VOLTS IT RAN TO 1000WATT MOTERS
what motor is that and is all those part stock
Watch my newer mx350 video
Top speed on 36v battery with the 800 watt controller (250 watt motor)?
16-20mph pending weight, terrain, tire, etc.
@ ok
any chance you are restocking the dewalt plug and play verson of this??
Just did !
Which battery kit would work for the mx350
Check out my recent mx350 video it’s a black bike! It goes over full kit
It did not work I did everything and it didn’t work maybe I should just charge it?
Almost never have any issues. Check that you put adapter on both silver pins of on/off switch.
Just to follow up. We purchased the 48 Volt Controller upgrade. Not the battery adapter. Installed by watching the video. We have power to the on off switch. We plugged the three pin connector into the accelerator (not using the bottom 2 pins). Nothing happens when you push the accelerator
What do you mean you have power to the on off switch? The light should not light up.
What 48v battery do you have?
We made our own 48 V battery from a TH-cam video that has very good reviews
Thank you.. very useful info...
I sell full kits now. Check them out!
hey do you recommend a charger for my mx350 cause it’s 36v 800w but i don’t have a charger yet cause i didn’t buy the caomm battery😊
I’d buy a battery with matching charger. Don’t cheap out on battery or charger
@ i have already but would a 42v charger work?
Yes for a 36v lithium battery get a 42v max lithium charger. 30v is dead and 42v is full
@IanSims-i1i I would charge battery directly
@ how do you do that?and would you have to take it out every time?
Could you put a link up to get the battery you have
Check out my TH-cam video on the 48 V crazy cart build. I should have some battery links there.
@JordyBuilds thank u I'm about to look
I just got my 6 year old son and mx350 for his bday. He is already needing more power i have a ton of tool batteries will this give you more power?
Check out my newer mx350 videos and check description! I sell full plug and play kits now
Will this rotor work on a newer mx350?
Should
How much would this cost?
Really not all that much and it’s good that it’s all plug-and-play
Thanks dude. Great video
I sell full kits now check them out 👍🏻
Sir your under arrest for having to sweet of a bike
Hahah thank you ! 🙏🏻
Hey Jordy builds I was wondering if you could send me the link on what battery you used so I can make this build Ty bro🔥
Is the link in description not working?
Crud…. I bought the Mx 650 throttle and controller. Now my connectors don’t hook straight up… and idk anything about cutting it up to make it work
Check out my new videos I sell plug and play kits for this reason
@ turns out it is a mx500 throttle and controller. I’ve seen your kits but I’m a brokie.
Will it work for a 48 v 20 amp
Yep! The ah is just how long battery last!
Will it work with 1000 watt mottor
@ThongchaiMoua yes if it’s brushed
how do you charge the battery?
Because i have a battery that has one plug only a xt 90
And my controller from vevor has no charger port
Come to va sometime we can ride my town there’s some others on razors out here as well
Man I’d love to! Do you have a instagram or something? I’ll follow you
@ no I’ll def work on that!
How fast were you going
About 22
i have that one
Clean build. Hope to see updates on how it does
Thanks! Will have a full TH-cam video up on installing the new KR5V motor!
do you sell them prebuilt or no
Bikes or the kits?
@ bikes i know the hits are
kits”
@@IanSims-i1i if you’re in southern Ohio I can
cleannnnn
Thanks Ian!
Where did you get the wheels at I found as pocket mod in a dumpster dive it works just need batteries but I don't like the small wheels it comes with
This is a bigger model
What about the charger
Will any battery work cause the cauomm is not sold anymore
It’s on Ali express or eBay Are the links in description not working? Cao comes with charger
@@JordyBuildsyeah but will three 12v ones work too or do I have to buy a cao obe
One”
That will work as well
Can you make a throttle that has modes because my son wants it to go 20 not 25
I sell speed limiters! On website!
@ how much money?
would this work on a razor rsf350
Yes
Do I have to do on my own or could send it to I heard you say customer so how do you you do these build for other people if you do I was wondering how you could do mine and how much would it cost
Gotta be local to southern ohio
@ oh nm then
Thats a cool kart. Fixed it up for you if not you can always sell it.
True!
Build it up for yourself! seen one of these on marketplace for cheap.
I’ve seen the all suspension ones so I’m tempted to find one of those !
So the only thing you changed other than the speed controller is the over volt kit and battery? If that’s it I’ll buy it from your shop as soon as I get confirmation.
The over volt kit you get a controller and throttle, it’s plug and play with stock motor. Then you just have to buy battery ( make sure to choose matching battery connector for over volt kit. Ex: cao mm battery is dean connector). If stock motor ever burns up there some replacements & upgrades but 9/10 times stock motor last awhile especially for street riding! If you have any other questions feel free to email me at jordybuildsyt@gmail.com
Is it good on bicycle?
Is your 36v available?
Yes, a couple days out to ship but it’s available
@ ok thanks
Can you use DeWalt flex 20v/60v
Nice bro!! any way i can put a controller to make it go in reverse for a go kart build???
For a go kart build, I would recommend going with a brushless set up!
@@JordyBuilds ok i see , but what controller do u recommend that has a reverse ? I made a small go kart from the mx stock just want to put bigger battery and male it go in reverse
Ruining the sport children and idiots are riding these things mental in the city! they will be banning them soon because of to fast modifications I just hope class 2 e bikes that are legal for us elders Don’t get banned to!
If nobody has bothered you to elders yet, nobody is going too
Out of stock… wating for restock
Restocking now
@@JordyBuilds yessir also I’m buying a kit for my sons mx359
350”
@IanSims-i1i sweet!!
How much money is the whole kit
Link in description!
May i ask how high u are for refrence?
5 foot 10
Do you know anywhere that I can get a motor that will handle a 48v for a 350?
amzn.to/3NgjSgd motor here and adapter plate here www.ebay.com/itm/305726673023?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=TYHCODIJSdG&sssrc=4429486&ssuid=N8Aide5TT9-&var=&widget_ver=artemis&media=COPY
What battery did he use
I linked everything in description
Watch the damn video