วีดีโอ

Glad you enjoyed it

The brackets came with the seat swivel that the seat is attached to. Good question, I should have included this info.

Thanks for watching! We love Canada and the USA so much beautiful scenery !!

Glad you enjoyed my videos. I nont know if it was a good reason, but we had so many attentive servers and some that only cleaned the table. Not sure if the tips are split. The beach was beautiful. The pools were beautiful. The return pickup time was arranged by the folks there and was a bit early because they picked up at other resorts also. Went fairly smoothly. Hope you have a great trip !!

We could have ordered a room with a Jacuzzi on our balcony. We chose not to and just enjoyed the ones on the property. I must say though, I was envious of the swim up rooms. When purchasing the room we decided it was not really needed , we would just walk to the on site pools. BUT, after watching people enjoy their swim ups, and then they walked to the bigger pools. I wished we had a swim up for early morning, late evening swims.

Very thick hard plastic. So far, the screws are holding fine.

Hope you enjoy it !

Thanks for your suggestion. My old girl does not have a fancy switch like that. Too bad. But I did find a solution that seems to work well. That is in another video. Have a great day!

Truthfully, I do regret taking on this project. One big downfall was I do not have a winterized garage to work on it. So it only leaves me summer time. And in the summer, I want to do all kinds of other things, like fishing. I am not worried about the cabin, it is pretty solid. But each year that passes, it is getting older along with me. Want to buy a boat? Ha Ha

I Hope you have a wonderful stay. !

Glad you enjoyed it!

I wish you well. Do you have a building to work on it during winter? I sure wish I did.

@@ourtbay it is covered with a carport. Do you think it's worth it to go with an inboard? Or should I just switch to an outboard? There is nothing left of the motor or outdrive.

A carport should help for sure, walls help even more. I did look into using outboard vs inboard when I was at that stage. I am by no means an expert, With an outboard the weight is behind the transom of the boat, like a lever and fulcrum. This puts a lot of extra weight on the back of the boat. I cannot remember the name of the device, but it is like a large metal float that is fastened to the transom, the engine fastens to that, this helps support the extra weight. Seems like it would look ok, and work, but is a big decision that I am not able to help with.

Once the shuttle is moving, it takes about 30 minutes, depending on how many other resorts it stops at.

@@ourtbay Thank you, my wife and I are thinking about going in September. Thanks for putting out the video.

They had coke with no sugar, three time the caffeine, not labeled as Coke 0. I find that tastes way too syrupy. I prefer Diet Coke or Diet Pepsi, but they did not have any. All the resorts have access to a set of off resort adventures. We chose to just stay onsite for our time there. If we were to go back, we would sign up for horseback riding and fishing.

I hope you have a great trip. Our final trip video from this trip is coming out later today. Hope you enjoy!

@@ourtbay thank you so much! Can’t wait to watch it ☺️

There is a sign outside each restaraunt defining the dress code. Casual Elegant. This includes Sneakers/ tennis shoes or dress shoes, dress shirts with short sleeves or collared shirts. No sleeveless shirts or flip-flops. Long pants required for men. I have seen some guys wearing shorts and no one said anything. I feel since the restaraunts are trying their best to offer high end service for us to enjoy, and we are trying to show our partners that we care enough about them to dress up a little, for them, why not pack a pair of long pants and a shirt for these events. During the day you can eat at the barefoot grill, or the market grill in your shorts and feel right at home. Hope that answers your question.

Glad you watched our video. There are a few more videos coming out to finish off our trip. I tried to not video too much of other travelers on their adventures. We did not partake of the offsite adventures, but there are a few that looked interesting. We just wanted a break with sand , heat and plenty of food and drinks. I hope you enjoy your trip !

We love that lake. My wife knows her stuff, however, I do make sure her line ends up passing over the fish holes. But she knows how to catch them .

Thanks for watching ! The sand was in the six inch walls to prevent bullets from passing through.

Thanks for watching! Yes the sand was to slow bullets down if someone was shooting into the room.

@@ourtbay Thank you

Hi, I totally agree about not trusting the oar mounts. However I think that if I am a long way from my truck and the electric motor conks out, I need something to help get me back. I hope I never have to find out! This spring/summer I want to go SOLO up a river , through hopefully easy rapids into a lake I never fished before. my fingers are crossed !!

@@ourtbay What I have done is to sit up on my knees and use a single oar to paddle the boat in. I had a motot break on me in the middle of the lake. If you are waiting to use the paddles the way that you have them only if your battery/motor goes down, you will probably be fine. Enjoy your boat!

Hi, yes that would be a good solution. Those aluminum oars/paddles that come with the boat are not very strong. I could just carry a good quality paddle to help push out and paddle back in a pinch.

Спасибо за просмотр. Если вы прочитаете описание, оно пояснит, что история рассказана понемногу в каждой части, а всего их пять. если вы посмотрите до пятой части, вся история будет рассказана.

I kinda wish I had bought a large snow bucket instead of a blower. In the fall and spring the snow is too sticky to blow, my little bucket takes forever !! Thanks for watching, enjoy your machine!

@@ourtbay Thank You!

He is a good guy to have on an adventure ! Thanks for watching !

Cool video 😎

I am glad you enjoyed part 1, I hope you manage to stay until part 5. The story is fully told by then

standard flow , however when I first purchased my machine (used) it could throw the snow twice as far. Pump must be wearing out.

It is a nice project , but takes a lot of time.

Mine has the title. It has taken me quite awhile, since life has so many other interesting things to do. My wife tells me I should part ways with it, but I really really want to see it in the water.

Hi, I am glad you liked the video. We are in Northern Ontario, Canada.

Thanks for Watching !

Thanks for your suggestion. Have a Great Day !

Thanks 👍I can hardly wait till it is in the water.

Thank You for your very nice comment. It means a lot to me!

@@ourtbay My pleasure 😁

Cushing Lake resort is another one of the lake's many beautiful resorts. Thanks for dropping by!

I Sure Wish I had completed some work on my boat this summer. I am sorry to say, that I could not find any time to install my boat's controls. I am going to make that a priority in the Spring. I want that boat completed so I can fish on bigger lakes. The inside does not have to be completed before going out fishing. Thanks for asking about my boat.

Looking forward to seeing it on the water . As am looking for the same boat myself .

Just picked up a nice boat similar to yours. Going to restore it as well!

Thanks! Your channel looks pretty good also. I am now subscribed to your channel also. I like a feed of pike once in awhile. Walleye are my favorite though!

@@ourtbay thank you sir.

Thanks for Watching ! Yes it was a nice camp spot. A dirty road in, branches trying to scratch off the paint , but once there it was fun.

​@@ourtbayэээээ№

Thanks for watching ! Thanks for your tips. My ammo was fresh as far as I know. I agree if it was actually last years from the store, it could make a difference for sure.

Hi Mike, thanks for watching. I am glad you got a laugh from the video. We try and have a bit of fun when we go camping. Take Care, Glen

Hi, thanks for your comments. I know the little air conditioner is not designed for this. But for the amount of time I will require it, if I get lucky and get a moose, I am sure it will last. I ran it for six hours in my garage non stop and had no issues with it. the box stayed approx. 7 degrees Celsius and the air conditioner kept working. The design is so the unit can be broken down and reassembled quickly. A commercial refrigerator would not suit my intentions for this little unit. It simply would not suit my needs. Have a Great Day!

@@ourtbayunderstandable. And good luck and hope you get a moose!!

Thanks for your comments and advice. Not sure how much the stripped hull weighs. Another thing to remember is DO NOT use the Hull as your ground for wiring electrolysis will eat at your metal. I sure wish I had a big enough garage to work on this project in the winter. It would have been done by now!! Take Care !

Hi, Sorry, My snow blower is in my back garage. I can tell you that it is a Bobcat make and is 48 inch wide. Your 643 has a wee bit more power would probably throw the snow pretty good with it. When I get to it, I will add model to your comment. Have Fun !!

I have heard stories about when there were no bass in the lake. There sure is lots now!

yes in the early 80,s there were none then in the early 90,s brail lake and lacs flooded and thats how they got in the lake might fave been late 80,s but we started picking them up in brail bay noiw there every where. @@ourtbay

That is interesting to know. Thanks!

Thanks for watching. I always enjoy fishing this lake, always can find fishing action.

i stay at pine point know but i used to stay at maki bay that area has great fishing

We stayed at lacdesmille.com/ one year. It was a long way into the lodge, we had a motorhome back then. Fishing was not too bad. I think walleye are plentiful in all areas of this lake. This fall when we went, it was hot, and second morning we played in a bay that only had 8 feet of water. Hard to catch anything but pike. But it was great scenery.

Thanks ! Glad you enjoyed.

Thanks for taking the time to watch and comment. If you watch my other videos on my Bobcat, you will see why I was having an issue, and a good way to easily put on the hoses in this environment. If it was a new machine it would be so simple with the pressure relief valves, but alas it is up in years.

Hi, the only name I could find on the boat was Seascape.

Thanks for your kind words. Turned out to be a big project. I wish I had a garage to work on it during the winter. Summers are so short and so many other things to do. It will get done !!!

Thanks for your comment. Cedar sure is lighter than Plywood. My epoxy covered plywood failed big time. Money down the drain! Have a Great Day !

Thank You for your comment. I am glad you watched this story, rough part of my life, but it shows people can overcome hard times.