วีดีโอ

Can you suggest some best stains for mahogany?

I have these exact same cabinets. They are original from the 1989 build. Are they antiques at this point?!?

High Volume low Pressure

- Watching videos about this topic and everyone else talks about shaking the container for 20-60 seconds while the carbonation is going in to make the cold water absorb it. You're the 1st to say to leave it on for 3 days sitting still. I guess I could just shake this jug and do it the faster way? Any thoughts as to why I shouldn't do this? I don't want to make any mistakes :) - I like the set up here with the dispenser handle rather than having to unscrew a lid every time I want to pour a glass.

You could have just not broken the top seal, and just opened the tap. That way, the beer will last longer as you're not letting oxygen in, and there still enough priming gas in there to dispense the beer.

Excellent video. Very clear, linear presentation. Incredibly helpful. Thank you.

This man is amazing

GOOD Grief I was thinking about this too hard! Thank you for such a clearly explained and demonstrated video!

Thank you!

Hmm its seems only 50% smaller than a baton 3.

I got the pet deluxe version and the water was only coming out a little bit. Ended up I had to disassemble the whole main machine to find that the water tube was pinched up in the inside casing. taped it down so it couldn't go back to the pinch spot and put everything back together, now it works fine.

You’re amazing, thank you for sharing!

I just wish he showed a bit slower for us girls who aren’t as handy as he is. I’m gonna have to watch this like 5X to throughly get how to use my Shark Stain Striker.

THANK YOU, I just bought it and was like there is no way it's broken.

good !

Thx for reviewing this. I used this for 2 area rugs and wasnt impressed. One is 8x12 and has been cleaned several times before by a pro. After raising a couple puppies with their ocassional accidents I had moved & did not know a reputable cleaner- so I got this. I am not impressed bc the carpet still smells like dog, and the machine itelf leaks a bit when I stop moving it to sweep away carpet fibers or turn it off to change electric plugs. The other rug is only 4x6 and it too still smells- I doused it in baking soda and essential oil so we shall see if that works. I think I will take this back & try the next more exp Bissell. But not sure of the difference except the next one is like $279 and keeps water warm.

Thank you so much for this, now I've seen where I was going wrong.

Maybe use less as you can add more if needed?

When you are waiting 12-24 hours, do you put the whole apparatus-including the tank-in a fridge?

Your lucky! I can’t find this vest anywhere:( I’m sold on the front pockets!

Mine worked with a couple of punch

Thank you so much. I was about to return my vacuum, but came across your video to troubleshoot it. All I did was take it into the bathroom and put it on the counter press the trigger into the bathtub and it instantly worked.

Does it pickup dust why is throwing my dust out help me pls

De-grease/light sand/primer/very light sand/two top coats of BENJAMIN MOORE ADVANCE (VALSPAR not a good choice)

This thing was the biggest waste of money I ever bought.

if you get it on the heating element can't you just wipe it down?

Bro, nobody could ask for a better step by step video than what you made right here!!! Excellent job making this video!!! Thanks for the video!!!

Thank you for this video! I'm replacing some of my windows and the workers are tracking dirt and mud on my bedroom carpet and the rest of the house so this is very helpful!

Also I need to say, I have a 29-year-old autistic son that is in love with anything vacuum or shampoo and he absolutely loves your calm and informative voice!!! If you're wondering why you're suddenly getting so many views, it's because I put this on his playlist. Thank you so much

I just got the Bissell turboclean pet XL. I just unboxed it today and me and my autistic son that loves vacuums and shampooers was going to use it. However, we got it all together and when we started it had put down so much solution right where it was sitting that I thought it might be leaking then we just go ahead after we tried to suck as much up at that area as we could. We go ahead and I had flip flops on so I was just trying to spray as much carpet as I could between 4 to 6 ft area and that way I could let him suck up any water that went down.. however, it just kept spraying behind. Every time I would use the trigger my feet would get wet 3 to 5 ft away from the back of the machine. Then when I went to go empty it as it kept doing the float thing. After 2 in and bubbles, I went to go dump the bubbles out. And thank God I was walking through my kitchen because the water dumped out from somewhere. I don't even know how it came out. I did not flip it sideways. I just tilted it.. so I have had it in the kitchen for about an hour and a half full of water and it's not leaking.. but I do not have that liver that says Max clean or light clean or whatever you just said to where it would spray less down at a time.

If anyone is having the problem where water leaks from the bottom on the machine, specifically the side where the clean water is on. Take out the black cap where that clear straw is attached and really jam it into the black cap. Make sure it is in there snug. Mine was attached but after pushing it in good it magically stopped leaking.

Some multimeters have a battery test setting which provides a load test.

AA battery has 1.5 volts, not amps.

Just bought his first voltmeter?

it's ok to do that, better to check the battery under a load.

ignorant

Mine won't screw in for some reason. Fun times.

I recommend filtering the paint from can. If there are clumps in the paint from the can, it will affect the flow ratio. Plus, it is good SOP to filter the paint from each container as it will ensure clean paint for spraying, especially on the smaller tips.

I just got mine from Amazon and for some reason when I turn off the hose start leaking, so I had to remove all the tanks before turned off 😢

Reads voltage. Does it read power?

Great detailed demo. very helpful. thank you so much

I followed this guy and my job turned out perfect,,i had water latex and i mixed 1 quart water to 3 quarts paint,,it was perfect,,the gun demo is perfect too, it only took me 1 time to set it up with this guy direction//thanks sir!!!

Can you use it just to vacuum, without using any water or cleaning solution?

What if I sprayed the heat element by mistake, but tried to rinse it the best I could after realizing it. Will my house burn down? And after how many hours can I use my oven again after the cleaning?

Ecellent explanation. thank you

This is the nastiest asmr video on TH-cam

Easy and clean video, tks

Pillow protectors.

infuriating excuse making for this grotesquely overpriced "waterweld." ($9 at Lowes C'ville) I had two straight fails, of it not getting hard after several hours, after kneeding a "slice" thoroughly, then applying the "putty" to a (perfectly dry, well prepped small hole in a brass pipe).... where does it say to wait 24 hours to be fully cured? The product literature directly indicates it would be just an hour.... but instead, still more soft putty, showing now signs of getting "hard" or sealing anything. As for "mixing well," I sure as .... h*lll did that twice.... Idiotic to think that we're to go to the center of the $9 stick to find a few slices that just "might" (or might not) mix right.... what a waste of time and $. Product does not deserve to have you making excuses for it.

Thanks a lot, nice work.