วีดีโอ

Hi, the engine oil used on the particular model is Mannol Energy Premium Fully Synthetic SAE 5W 30. It is on the video and there is a link in the description. Make sure you order the correct oil for your vehicle especially if there is a slight model difference from the car in the video. Hope this helps. 🙂👍

Hi, it will bend them but may also kink the pipe or flatten it at the bend area. You can buy pipe springs which you can insert into the pipes which will help retain there shape. Hope this helps.🙂👍

Thank you, I’m glad you liked it and subscribed to my channel. 🙂👍

The manifold absolute pressure sensor monitors airflow into the engine, which helps the vehicle’s computer calculate the air and fuel density levels entering the engine. So it very well could be your issue. The symptoms are many, it can cause lean or rich fuel mixture causing rough idle, poor fuel economy, slow acceleration and a strong smell of gasoline. Surging, stalling, lack of power, hesitation on acceleration, backfiring through the intake, and overheating. Unfortunately many of these symptoms could also be caused by other defects. There is a lot of information online which may help. Hope you find your problem. 🙂👍

Thank you 🙂👍

Thank you, I’m glad you like it 🙂👍

Hi, do you mean when you carry out a diagnostic test.

@EverydayWorkshop yeah ..only the body control module communicates...

Not sure why this would be, it may possibly be your scanner and you need to try another type.

@EverydayWorkshop update...removed the can bus wires from the new handbrake module and joint them together..all OK. Seems either the new handbrake is faulty or was damaged

@@barukkazhad8998 That’s great news. Another Disco issue to look out for. 🙂👍

Thank I’m pleased you like it 🙂👍

Hi Tom, it’s a TowTrust towbar. This is a link to an unboxing review: th-cam.com/video/Z4PV1BzrvJo/w-d-xo.html. Also if the you check either video description there is a link to the towbar from the supplier I bought mine. Hope this helps. 🙂👍

The main trick is using the grease to keep it central and then a sharp whack to enter the CV 🙂👍

Thanks, it is a lovely old machine ans a real piece history. 🙂👍

Hi Nick, sorry I haven’t replied to you before now. It sounds like yours is a newer model and has brushless motor. I am not an expert on these so can’t really help, if you haven’t already try searching on TH-cam for checking a washing machine brushless motor. Sorry I can’t be more helpful.

Yeah I angre they aren’t expensive, but if there is actually nothing wrong with it except being carboned up and it is cleaned in a few minutes. Why not. Made a video about it too. 👍🙂

Thank you, I’m very pleased you found it useful. 🙂👍

Why didn’t you tell me that before I repaired it 😉 (only joking)😁 I agree with everything you said, but it was the weekend I needed the vehicle and quickest I could get one was in three to four days. I had the weekend materials and ability to get the job done. I did contemplate all the issues you mentioned but opted to repair it. And if made a good video 😁. It was still going fine a year and half later. Hope you enjoyed watching. 🙂👍

@@EverydayWorkshop 😆.

Thank you, I’m pleased you liked it. 🙂👍

Hi, do you mean the oil filter housing?

Thank you very much. I appreciate your kind words, it makes it worth while taking the time making the videos. 🙂👍

Head gasket is fine, this is a temporary consequence of clean the DPF with special cleaning fluid.

Does look it. It’s DPF cleaning.

Thank you, I’m very pleased you liked it. To be honest I’m not sure but will try and find out and let you know. 👍🙂

That's the sim card location for Volvo's networking.

@@t.v5195 Thank you for the info 🙂👍

Thank you, your words are very much appreciated. 👍🙂

Hi, is yours the earlier model. 2017 is the model change year. It may be this one th-cam.com/video/1Nytbjna-A8/w-d-xo.html

Hi, it looks like it’s fuse number 11 in the engine compartment fuse box. Hope this helps you. 👍🙂

That's under the other fuses?? How you take itt of the complet top??

Hi again, I should have included that in my video (my bad🙂) Don’t have one of these vehicles available at the moment, but I’ve had a search and found this forum that seems to show the procedure quite well. Hope this helps. 👍🙂

Actually it honestly doesn’t at all, it’s turned out to be so useful. I now use the same space for my bench grinder and chop saw. 👍🙂

🙂 no to what exactly

Hi, do you mean does it work well, yes I can recommend it. If you mean where can I buy one sorry this isn’t for sale, although I am considering making them to sell. 👍🙂

Hi, I believe it’s 86mm. I think i put it in the description. Hope this helps. 🙂👍

Hi David, yes it should do, they cover around 60 car manufacturers, so if your car has an OBD 2 port I’m sure it will be covered. Hope this helps. 👍🙂

@@EverydayWorkshop thanks you ! :)

Hi Steve, yeah unfortunately it very likely looks like this.

Hi Conrad, thanks for commenting. If you watch the video you will see it is leaking at the top. It’s a well known Volvo fault on these XC60s. The video is showing how cleaning out the blocked drainage channel can stop the leak (water will take the easiest route) as it did in this case. Ultimately like you say the windscreen will need rebonding. You will also notice I only applied silicon on the sides not the top. Although this wasn’t really necessary. Oh and a year and half later it was still not leaking, so I was pleased with the result and it made a good video. 👍🙂

Hi Lloyd, thanks for your comment. Not really sure what you mean. Why would it be the wrong hole. The aim is to fill the oil filter as full of oil as you can to remove the air from the system, shortening the time it takes to build up oil pressure. As mentioned in the video it is a bit more difficult to do this with a side mounted oil filter. Hope this helps 👍🙂.

Hi, this vehicle is a 2014 model and should be the same on all vehicles from 2011 to 2018. Sorry I should have made it plain on the video description but forgot to update it 🙂. All Audi model should also be the same or similar. Hope this helps. 👍🙂

I agree Volvo could have done much better with this design. Not sure why they have made access so difficult. 👍🙂

Are you making the point that the oil isn’t being filtered? 🙂

Hi Mark, thanks for commenting. I have to disagree though, there are more likely ways to introduce contamination into an oil filter than using brand new oil out of a brand new sealed container. Your GMC with 424 oil changes is the main reason you’ve never had an issue. But if you’d like it to cover another 1.2 million miles I know this would be beneficial. I’ve done literally thousands of oil changes over the years and have heard that brief but excruciating sound of big end contact just before the oil pressure builds many times, especially in older engines. If you own your car and can shorten this period in my opinion it’s a no brainer, it will definitely be kinder to the engine increasing its longevity. Not trying to be argumentative just enjoying the discussion. 🙂👍 There is a very good video I found on TH-cam a while ago with proper test proving the value of filling your oil filter if it’s possible. I’ll try and find it and post a link if you’re interested.

Just found the video, produced by The Motor Oil Geek - th-cam.com/video/939WTeorBnQ/w-d-xo.htmlsi=iprqV9kmsPHMV1H- Great video and well worth a watch.

I don’t claim to be a expert, I am however speaking from experience. My dad was a professional mechanic who owned his own shop. He taught me to change my oil every 3,000 religiously. He explained that when you refill a paper filter made on mass production equipment, there is a better than average chance that dust from the cutting machine will be in the pleats of that filter. He said there was even a chance of metal contamination from the outer shell stamping machine. Now as to if any of that is true and to what extent… I can’t honestly say. But I can say that my GMC has over a million miles and the engine compression is still 178 lbs. and I never pre filled as per dad’s advice. And yes I am open to suggestions and your opinions. Maybe I won the engine lottery with this particular small block, but I like to think that dad was right.

That video will make me rethink this. What I have been taught is now in serious question. Live and learn. Thanks for the information.

😁 Good for you. I spent about 40 year with my hands in oil not wearing gloves, and my hands have payed the price. So now I do wear them. 👍🙂

You are so welcome, I am very pleased you have found it useful. 👍🙂

😁 Ain’t milk brilliant!

I haven’t sorry, but will if I get the chance.

Yep 🙂👍

Hack

That’s why mention it in the video. You could always turn the vehicle on its side. 😁👍 Seriously though you might be able to get some oil in and be quick. 🙂

Nice to hear someone who understands the physics and has mechanical sympathy for engines. I am amazed how many people can’t understand the benefits and argue against it. 🙂👍

Hi, yes it’s fine but it is only around a year and a half. I would expect it to last at least another three years. 🙂👍

@@EverydayWorkshop yeah well we can wish all we want but the days when parts were made here and had quality built right in are long gone, replaced by the whole “parts are cheap enough to buy over and over” mentality. that’s fine for kidneys and hip joints, but i don’t want some crappy betters that still cost $145 to pick the worst time to crap out. and it did, does, will. some things should just be superior quality because of their uses. families use them. people who make crap quality parts can’t stand behind the products they make, or do but those parts are designed to fail regularly on schedule. but anyway just went to home depot and bought the exide 51R to put in a miata. let’s hope.

Let’s hope it doesn’t let you down, time will tell. I agree though car manufacturers definitely design failure into the vehicles, not soon enough to get a really bad name but at a point where they make a fortune on parts replacement sales. I remember back in the eighties to early nineties as a small independent garage we were replacing more than 5 Ford doors lock barrels per week. Now if you do some basic maths, our town say with 10 garages times say 100 towns. All very conservative numbers. The locks back then cost around £20 each from Ford, it works out around £5,200,000 in sales per year for them. Probably way way more, but not bad. 👍🙂

I agree, it seems all car manufacturers are now on a mission to make everything difficult. Hence the historic DIYer can no longer do what were once simple tasks. Instead you have to take it to the dealer! But hopefully this video will help you do the job yourself. Thanks for watching. 🙂👍

🙂 please explain why

You are absolutely correct, for most people it wouldn’t make any difference while they have their vehicle. But the lucky owner way down the line will still hopefully have a reliable car at x00,000 miles, instead of one with rattling big ends, about to cost them a fortune or a premature trip to the scrap yard. All us oil filter filler uppers are doing our bit to save the planet. I’ve done literally thousands of oil changes over the years and have heard that brief but excruciating sound of big end contact just before the oil pressure builds many times, especially in older engines. If you own your car and can shorten this period in my opinion it’s a no brainer, it will definitely be kinder to the engine increasing its longevity. 🙂👍

You are absolutely correct, for most people it wouldn’t make any difference while they have their vehicle. But the lucky owner way down the line will still hopefully have a reliable car at x00,000 miles, instead of one with rattling big ends, about to cost them a fortune or a premature trip to the scrap yard. All us oil filter filler uppers are doing our bit to save the planet. 😁👍