วีดีโอ

I bought a Walker and that spring limiter switch you have , is that a OEM Walker switch or is that a BUYER Dump body limiter switch ?? Let me know thanks !

Thanks!!!!

Any issues with your chains or anything. I've seen problems with the 30in

My tines are clicking is that normal just got the machine

Thank you so much!!!!! This worked!!! I had the wobbliest Ingolf bar stool in the world that felt like it was going to collapse sitting in it, after an hour of attempting to fix it on my own I tried your method and I am so happy!!

Don’t know how there’s no comments yet, but fantastic man that helped out a lot

I still use May and June and Fall Season. Toro Core aerator works great, just raise the tines when turning, otherwise the sprockets get loose.

Do you still use the Toro aerator or is it too much maintenance?

Rugs are different, some thicker or different material, You may need extra time and passes to get them flat.

a.co/d/dQDixAY

More than 10 seconds.

Cute dog

That's is true, eventually loses the balance, what we did is adding Chair leg floor protector and the chairs feel stable. Pretty chairs but cheap. We still love them.

Nope, soon as all 4 top screws are tigtned they go to their missaligned settings.

*promo sm* 🌈

'promosm'

Cute dog

Looks awesome!

Thank you for this video.

Mine is not turning on

Hello I have the same Black Max machine. Hope you can help me. the manual says that the two vacuums and pump are hooked to the black power wire, and the red wire powers just the heater. In my machine the black wire powers just one vacuum and the pump and the red wire powers the heater and the second vacuum. Is your machine the same as mine?

I missed to tell you, the new bolt for the Sproket Tines chain need to be grinded, the new bolt head barely touches the the tine when your spine the tires while driving, you can reduce it with a benchtop grinder. I grinded almost half but I didn't damage the side of the bolt head in order to use the wrench and tight it as needed.

That machine is working just fine. It sounds great. In series vacs only work properly when the 1st vac is on, also. But, if you installed a new motor on it and it was four years old you just bought yourself some extra time. I noticed you’re using a power strip to plug them into. I would just go directly from the machine to the plug on each cord for best performance and lessen the chances of tripping the breaker. With portables I’ve noticed over the years that you absolutely must keep them clean, use defoamer and do not lhe waste tank over fill. You’ll have to tighten the screws on them weekly and watch the hose connections inside. That and good ventilation for the vac motors should keep you up and running for at least four more years. There nothing wrong with that unit as long as you take care of it. Hopefully your friend gave you a good deal.

The reason he thinks the second vac is weaker is because these vacs are in series not parallel. This means that when you turn on #1 it is first in line so you get full suction the # 2 vac when turned on will only get full suction while #1 is also on. When #1is off and #2 is on it has to pull thru a non working vac. That means it has to move the fan blades of two motors but all by itself. So it appears weaker but it is not I use the same set up. Tested each vac with a meter to insure they both had equal suction. Hope this makes sense.

I did but definitely you need the extra vacuum blower for better suction other wise will take 1 day or more to dry. Never use more that 100 or 120 psi . Otherwise will be oversoked .

Are you using the 360i with this portable yet? Curious if it working well...

Don't buy this blackmax machines from pwer flite. They don't work well and they blow the brakers very often. I have 2 replacements already. You will regret buying this carpet extractor.