วีดีโอ

@@mitchellmiller5064 for sure, I bought a couple pairs and I’m gonna make a video testing them out on a couple different cars with various connectors. We’ll see how they perform.

@@metalf919 thanks for the comment I got some otw we’ll see how they do. I have low expectations though. Doubt they fit anywhere in a foreign engine bay, maybe good for an American vehicle… we’ll see lol

Also u gave me an idea I’ll be giving a couple pairs away video should be out around 26th or 27th

@@himr6 thanks for the feedback! I have some otw, I feel like they will work great for newer American vehicles, not too sure about foreign… I have an older gmc sierra and newer Honda so I’ll test it on both soon as I get em

@@flipposgarage I used them on an old prototype JLG 1255. The machine is pretty old. Didn't break a single connector and we run these hard. Also used it to push out locking clips. They worked great.

I use my hands, but that’s a good point I’ll include those during my video when I review these.

I’m curious myself tbh… I have icon in the garage and I’m gonna buy a snap on wrench and some of that plastic stuff and test it myself soon… very soon also gonna put a mic on it see what measurements are in the jaws of the wrench

Damn it brother! They’re a little too rich for my blood but too each their own I really like icon and Milwaukee never had a problem from either. Have you tried the newest Milwaukee 1/2”?? It’s dialed and smaller. Just curious why do you choose to spend that much on snap-on tho? Is it just the brand you like?

For sure! Easier and cheaper!

For sure, planned obsolescence… a lot of companies are doin it these days even John Deere

@@flipposgarage yes, sadly my friend. I am a Toyota technician and I am sad to say even reliable brands like Toyota and Honda are no longer the same. 🫠 People think im kidding when I tell them I will never buy anything manufactured over 2010.

Yezzir low maintenance and cheap operation cost

Is carhart a woke product now?? Haha I don’t keep up with the news much I guess… plz enlighten me

Thoughtful comment, thanks! lol 😂 some ppl think I’m wrong that Tesla has upper hand

I agree! I actually like the concept of diesel-electric hybrid but I feel they need to narrow the options they’re offering and customizable kit is nice but too many options can make or break a business

That’s definitely a concerning factor but if you watch original video they’re offering too many custom options which can make or break a business there are a couple problems they definitely need to address before going public with this product thanks for ur comment though!

For sure I agree

Just what I got from Edison website feel free to correct me

You can see part of the dash was removed I bet they cut part of fire wall out and it allowed flames to come thru but usually a fuel related problem. Problems you run into with all that freedom and horsepower lol

🤣🤣🤣🤣🤣

Superior technology lol 🤣

lol best of both worlds

True Tesla has upper hand there but I wish Tesla would start getting into the diesel electric

​@@flipposgarage Tesla is not touching that shit 😂

@@mcsike7264 lol all I mean by it is they have the resources and capabilities to take it to the next level just like they’re doing with hydrogen

@@flipposgarage hydrogen are just evs with extra steps tesla semi gets 500 miles full loaded nikola hydrogen truck gets like 300 to 400 miles

I just think the next logical step is diesel-electric they not only sell retrofit kit for semi they are making kits for pickup trucks also just smart idea. I never said I don’t like Tesla either

No only reason I did is because I was replacing those while I was in there

lol yea they’re cool and all but if I had that kind of money I wouldnt waste it on an electric vehicle for sure

Appreciate it!! Yes starting to gain a little traction haha, I just try to get better every month. Means a lot to have support from locals like you!

@@flipposgarage looks like you’re getting the hang of it, man! Good luck! Keep on posting!

@@undestructible-gaming I like the hydrogen vehicles a lot of potential there!

I hope not… I’m not ready for the change

That’s what I’ve read from my little research on it.. I hope you’re right, I’m not ready for the switch really… there is potential with hydrogen or double injection

Most companies probably are but Tesla is still selling the Tesla vehicles aren’t built very well in my opinion but they’re built better then all the others for sure. But I hope you’re right

It’s not about the speed tho, it’s about them just becoming a collector piece same as the old mustangs and Camaros they are slower then cars today but people collect em.

I agree..

@@flipposgarage yea man breaks my heart but aye 🤷🏽‍♂️

So you’re the guy responsible for giving me the wrong parts! Haha jk brother I agree though in part, still gonna have the guys (like in some of my videos) stealing them and/or wrecking them… smh

@projectfarm made a video using propane compared to 134a in a truck he had and the 134a actually outperformed the propane in terms of cooling. It was a cheap can off Amazon though so that may have contributed to the poor efficiency, 🤷 interesting though…

@@flipposgarage I’m in Florida. I see a 10° minimum drop on vent temps at idle. Sometimes as high as 15°. It’s pretty critical to use high purity propane. 99% or greater. I got mine from a commercial refrigeration company here local. Was like $300 for 20#.

Love it! Gonna have to try this out on my beater truck lol thanks for the info

I agree, I’m not in a rush for it either. The electric car makers have a lot of kinks to figure out like you said with the batteries. And I really don’t see how they can make us switch like that because from my research the process to mine for the lithium and dispose of it is worse for the environment from what I’ve read then petrol… idk crazy stuff

Do you live in the Arctic circle?

You missed the biggest one: EGR + Direct injection. EGR was already bad enough, but at least the gunk got "rinsed" by fuel. Now it just cakes up on the intake valves and nobody seems to have a solution, other than buy a new one.

@@castanza128 oh I forgot to mention all the things they add for "comfort and luxury" that make it more of a roadside appliance rather than just being a car. More and more people are buying "antique" vehicles and maintaining them their selves quite easily.

@@castanza128 the dual injection was a good idea I think Honda or Toyota used, they have direct injection and port injection that way you still get the power of direct injection and the port injection for cleaning valve and when less power was needed closest solution I’ve seen to this problem

For sure

those things are gonna go for at least 120k 😅

I agree, I’m not in a rush for the switch to electric. They still have a lot to figure out with the batteries and etc…

You do if there was as much metal in the lines as this one had… I wouldn’t ever leave a condenser or evaporator if a compressor sent that much metal thru the system. Now if ur just doing conversion then ur right but wasn’t the case here

I have multiple dirt bikes and atv’s and go carts for my kids this is my sons lol I like these Chinese bikes because they can tear em up and it’s cheap fun. But we have some Yamahas and Kawasaki toys too. Made this video to let parents and younger kids know they are just as fun

Yea cheap fun for sure! Cheap to fix and idk where you are but in Oklahoma they hold their value well. I also like it so my son can learn to work on bikes and maintain one

not for long tho

Yes it does from what I’ve heard also. Parts replaced because of the metal that was in the system from failed compressor. My opinion and the 2 shops i spoke with said the cause was the new 1234yf refrigerant causes the compressors to fail early. I also made this video because multiple people told me it wasn’t possible. Wanted to prove em otherwise. Thanks for the comment!