วีดีโอ

So, an X9 with no IPAD.

Right after world war II my dad got a new case A6 what's a pick up attachment and Wisconsin engine

Back in the 60's, we had a Case A6 pull type combine with a Wisconsin 4cyl engine on it.

Love seeing the old machinery being used as intended. Out of curiosity, was the 75 orange and green from the factory, or has some creative parts swapping occurred over the years?

Love it! Is that an 8 or 10 foot head? I picked up a 10 foot NH 905 last fall. I just got it out for a test run for the first time today. Unfortunately life has made it difficult to farm this year so I won't get to run it until next year. In the meantime, I'll live vicariously through TH-camrs like you.

Looking good. Love the video.

That's cool as all h ll

Who's the idiot on the combine? Either let it go or get off it . Quite stopping it every two ft. Another thing why didn't you put the unloading tube in? Once it's full you are not going to get it in there. Yes i do have this machine and i do have the next size up too. Looks like the main drive belt needs tightening if it stops from a small wad going into it.

I'd like to someday do this. I've been thinking on a way for the draft control to work with top link sensing. So far my idea is a frame that goes on the tractor 3-point like a quick hitch, but it hangs below the lift arms and the plow hooks on down there so when it pulls harder, the top of the frame pushes on the top link. It would lose some lift height, though and I don't know how much it it would need to hang below the lift arms to get the proper amount of leverage to be in the range of force the draft control needs to work properly.

That is a beautiful sunset! What makes it even better is seeing it while on a Case tractor 👍

I've noticed lately several people using a side by side to pull a rake. I guess they either want to be in the A/C or don't have a smaller tractor to use. Plus that would be easier since most tractors they have are 100+ hp which is crazy overkill just to pull a rake. Lol. Many times I'll have some locals ask if I want to rake with one of my antique Case tractors, and they'll buy the fuel. 👍

Just picked up one of these at auction as my first tractor, I can't wait to use it in the field.

Is this what your dad called "ditch hay"?

nice countryside 😃. Where is it filmed?

hello nice vid... but no sound. Why are there green lawn in the field ? thanks for sharing your vids.

Hi. I got a little confused. When you we’re approaching your shed you put it in caseomstic. Then you said it was in 4 direct. I do find it a bit confusing. So u start in caseomstic. Can you run in that all the time? Only put in direct when you are just up to speed and going constant? Could you just drive in direct abd that would be the same as one without caseomstic ? Thank you

Hard to beat the steady power of a D series CASE

Hello great video. From your videos Ive gotten educated a bit more on ji case plows. I'm curious to know where you get parts for your plows? I have a three bottom similar to the one in this video, particularly hub parts for the wheels.

We had 3 of them 50 years ago, reliable and cheap to operate

We were discussing in Fargo ND yesterday about the loaded rpm a LA tractor will give on 540 rpm PTO. It's phenomenal

Good to them out& work them

Great looking and great running D.

Sorry I hit the wrong key. The plow also had the small land wheel too. It was a great plow but was too heavy for the short 600B tractor. In the clay ground we had. I got very good at using the brake on the ends to bring the front of the tractor around so as not to run into the fence until the front end came down. The manuel stated that you could remove the rear cylinder bracket and reverse the brakes and bolt it together to delete the use of the cylinder. The plow had the old centennial B series long shears. The 300 series tractor had 134 cu inch engine and the VA series had the124 cu inch engine. The 300 series had the triple range transmission and the hand clutch for live pto. Oh! The picture of the 400 with the 4 bottom plow was a 411 model tractor. My uncle had a 401 model which was the diesel model. My dad had one VAC with add-on live hydraulic added, one 1950 VAC with eagle hitch, ne VAH, and the 611B. And my uncle had a 1950 VAC and the 401 case. When I got home from my Navy duty I had a centennial BH 3-14 plow. That was an easy pulling plow and did a great job Tom..

Evening Ben. My name is Tom and my dad had a 3-14 BE series plow on his J I Case 611B tractor which had case-o-matic drive. The plow had the 3.25 inch Case hydraulic cylinder

I have a 1952 A6 combine at WMSTR

Are you going show more model's j.i.case plows, or case equipment?

I'd like to see an overview on the centennial plows when you have time

14-16 case throw away lays are the same. Available through shoup

were you feeding across or milling a taper!

I love it Ben. I can't wait to see it in action.

Very cool!! But running it with a Hit and miss engine would be next level...!

I got e h plow I didn't get off

Depending on the soil and blades of the plow says it all.

Till more gooder you.

Let’s be realistic, change the rules if necessary. I never stopped every 10’ to see how my plow was working. And probably plowed at a significantly faster pace.

Should see if Anderson would make Case moldbold extensions at his foundry.

I didnt know you could lock the tail wheel in. Do you know how lock it in?

Great video 👍👍👍

Was that a 5 bottom plow that you cut down to a 2 bottom semi-mounted plow?

Best forward to 8.43. No conventional clutch, no torque converter either. Its an engine coupled directly to a 3 speed auto and thats coupled to a 4 speed manual. For a clutch it uses one of the 4 clutches in the auto section to engauge reverse (while disengauging the rest of the clutches) to disengauge the engine, but also reverses the internals to create a braking effect to slow the auto sections output shaft so you can select the manual box (range selector). Its got a torque limiting clutch, but thats a safety feature which normally isnt used.

Thanks!

James says way cool.

those disgusting wind mills....soon to be in the land fill..

That is a clean old machine! I've got one on my bucket list! Dad had one when I was a toddler though; after a series of unfortunate events he has forbidden them from his farm.. not mine though 😂

No foot throttle?

Nice machine! I found an old Hesston with a 10 foot head that's not in as good shape as yours. I'm trying to decide if i want to put money into getting it running again or just convert it into a pull type. I have the stuff to make the conversion, just gotta decide what i want to do.

How do you guys shell your buckwheat? I'm lending a hand to an older guy to run some new grain. We would like to do it all in house.

I see buckwheat pancakes in your future. 😊

That's really cool I didn't know it could do whole corn. On my channel I have a c.s bell flat belt and 1917 ihc corn sheller

Beautiful VAC flat deck & seat. Sounds great, but a real waste of time watching you NOT retrieve what ever it was. Next time, please plan something entertaining