- 18
- 169 849
Fishin' and Fixin' shxt
เข้าร่วมเมื่อ 1 ธ.ค. 2016
Just what the channel title implies. It's a place for me to dump videos about fixing and fabri-cobbling things and a place to drop videos of me fishing with family/friends, or by myself. Occasionally the two subjects may coincide.
I was the repair shop manager for Seven Corners Hardware in St. Paul, MN when the owner finally got an offer for the property that he couldn't resist. I now work at a small repair shop in Minneapolis, fixing power tools that people have broken.
I got the boat for free in the spring of 2016 from a friend who got it from his cousin who said that it ran when he parked it last. Classic story, right? Well, it didn't run and I brought the old Mariner 90hp inline six back to life. You'll see it in action in some of my videos. It is too much boat for that little Tercel to handle, so I got the van in early 2017. The car is currently for sale.
Also, like my Facebook page, if you would.
FAFS.MN/
I was the repair shop manager for Seven Corners Hardware in St. Paul, MN when the owner finally got an offer for the property that he couldn't resist. I now work at a small repair shop in Minneapolis, fixing power tools that people have broken.
I got the boat for free in the spring of 2016 from a friend who got it from his cousin who said that it ran when he parked it last. Classic story, right? Well, it didn't run and I brought the old Mariner 90hp inline six back to life. You'll see it in action in some of my videos. It is too much boat for that little Tercel to handle, so I got the van in early 2017. The car is currently for sale.
Also, like my Facebook page, if you would.
FAFS.MN/
1977 Suzuki DT9.9 carburetor disassembly
This carb is so simple. Simple to remove (I'll show you when I go to put it back on the motor) and easy to disassemble.
It was pretty clean inside, except for a tiny bit of corrosion. I'm going to scrub all that out and hit all the little holes with a needle file.
Sorry about the video. My camera work sucks and so does my commentary. Also, my garage can get pretty disorganized, so I spend some time hunting down tools. Someone who isn't an idiot would have the tools laid out and be ready to go, but that's not real life, is it?
It was pretty clean inside, except for a tiny bit of corrosion. I'm going to scrub all that out and hit all the little holes with a needle file.
Sorry about the video. My camera work sucks and so does my commentary. Also, my garage can get pretty disorganized, so I spend some time hunting down tools. Someone who isn't an idiot would have the tools laid out and be ready to go, but that's not real life, is it?
มุมมอง: 1 218
วีดีโอ
1977 Suzuki DT9.9 after replacing fuel lines
มุมมอง 2834 ปีที่แล้ว
It appeared to me to make a notable difference changing out the fuel lines and connector. It sounds really nice when it revs up.
Sprunger 8" table saw
มุมมอง 5684 ปีที่แล้ว
This is a cute little shop style table saw with an 8" blade, just like my Hitachi C8FB compound sliding mitre saw. These smaller saws are nice because I seem to get a better, cleaner cut. No doubt it's because of the higher RPMs at the tooth edge of the blade. The clattering sound it is making turned out to be due to a loose arbor pulley. I put some red colored goo on the set screw and tightene...
Secrets for Success Walleye, Bass, & Panfish
มุมมอง 1086 ปีที่แล้ว
Another old VHS discovered at the thrift store, converted to digital for your enjoyment. Educational information on fishing for these species.
Zero carb keto carnivore noodles made from meat
มุมมอง 8K6 ปีที่แล้ว
Ingredients used: Approx. 800g chicken breasts - processed Approx. 400g egg whites 1 bag (92g) pork rinds - processed into dust Combine all ingredients in food processor. Load into pasta press, found here: www.ebay.com/p/Stainless-Steel-Pasta-Noodle-Maker-Fruit-Press-Spaghetti-Kitchen-Machine-Gift/2249673210?iid=132332014345 Press into boiling water (with salt optional). Cook a couple minutes. ...
Boating in Minnesota in January 2018
มุมมอง 286 ปีที่แล้ว
This is the 30 degree day in January that I took off of work to go do a little fishing. I got skunked, but it was still a good feeling to just be out on the water. I launched at Evert's Resort on the Mississippi River (pool 4).
Zombie Apocalypse survival mega flashlight project
มุมมอง 377 ปีที่แล้ว
First stage of survival flashlight assembly.
BC15BD Black and Decker battery charger and reconditioner product review
มุมมอง 111K7 ปีที่แล้ว
In this video I discuss my personal experience with the Black and Decker BC15BD battery charger, reconditioner, and vehicle starter. www.blackanddecker12volt.com/bc15bd
KastKing Speed Demon 9.3:1 high speed retrieve baitcasting reel unboxing
มุมมอง 9167 ปีที่แล้ว
A little tour of the shop. Unboxing of a new toy. Here's a link to the reel (I paid $30 less on Amazon): www.eposeidon.com/kastking-speeddemon-baitcasting-reel-16407 Info on the rod (again, I got it on Amazon): 8ft. Mudville Catmaster - medium heavy mudville.net/index.html#rodscombos Update: After having used the reel a bunch of times I have to say it was worth the price. It casts well when you...
Evacuating power steering fluid using compressed air
มุมมอง 3567 ปีที่แล้ว
Evacuating power steering fluid using compressed air
How long does the recondition typically take? Mine has been going on about 20 hours and isn’t done. Is that normal?
I just bought this unit.
😂😂😂😂😂 this is so dumb. Goes from wrong to worse lmfaoo.
the charger may be ok but your review tells nothing not to me , its SHT
So it taking more then one day to recondition is normal?
How long do the battery reconditioning stay on for???
after you get the flo. does it needs to be recharged? or are you done?
You're done. Flo is float charge which is basically trickle charge, I have this B&D charger in the video, it's reconditioning my Duralast battery now.
LOTS OF TALK....NO INFO......I have 2...they both quit while charging my Dodge double battery
Chill out sport…. Slingin crap around like you have some special hybrid version of a cross between turret syndrome and Parkinson’s disease. By the way that cord was fine
How many times did you recondition the battery? 2x 3x ?
My last Duralast Gold battery I reconditioned it probably 7-8 times with this same B&D charger in the video. It will tell you when it's dead by not even going into recondition mode and says by putting up a warning triangle.
Ok, this one I have now, just died yesterday, it was only 8 months old. I called a Autozone near me. He ordered one for me which it will be there at 1 o'clock. It seems that towards the end of 2023, there was a bad batch. Mine was dated 10/23. I saw someone said on a review his died and was dated 8/23. This one would just recondition constantly but never hold a charge, no warning message nothing. I had it on the charger for over a day and half with no improvement.
@@leonardrhodes1958 that's funny because I had the same issue with a battery from AutoZone my date was 12/22
Wow now that’s walleye!
Attached this to the positive and negative posts away from the battery itself(I wasn't sure this would work.....negative on the car frame, positive off of the fuse box....hit the engine start button after a 10 second count down then the cars start button inside the car. To my surprise. it started the moment I touched the start button...so much easier than taking my cables out on a windy 17f morning ...an eight year old battery that came with the car when I bought it. It made my day!! Great unit...much better than the previous four or five I purchased over the last 50 years.
Mine stopped working, only shows the cables when i plug it in, any idea?? No buttons do anytbjng
Would you recommend?
This charger goes dead fast if you monkey around with buttons and the connection and disconection procedures.😮😮😮😮
No, it's supposed to be small side up. You're not really doing much to concentrate the flame or drive the heat inwards rather than out the sides. The problem is western residential stoves really aren't made for real wok cooking, both in BTU output and the grates. You actually have potential in having a bunch of flat space around the hob.
Kodi Bass from Inside Outboards channel, smears some vasoline on the fuel pump diaphram. This must make it somewhat flexible again!
Long term review on this charger would be good.
Exactly like the everstart, exactly like the vector, I wonder who really makes them?
Depends on the size of the wok. 99/100 would normally have the small side up for mine 🤷
Show all of the units that you commentors are making have actual ones that work? Mine doesn't
What in the hell did you just say? 😂
Finally I see someone do it right!
I’m trying to charge my mower battery it’s completely dead, I hook it up hit charge and it went straight to reconditioning? Is that normal and will it automatically start charging after it reconditions?
I don't know about the automatic part of it, but after the recon cycle it should go to FLO (float charging). Hope this helps.
When you hit the reconditioning button, did you immediately see numbers cycling as in the video or did that happen later?
You won't see anything until after 24 hours it will happen automatically
I opened the box connected it to the battery. The screen comes on and the imager for the connectors flashes like there is not a battery. Is it unit defective or is my battery that dead? I tried it on two batteries
MINE DOES THIS FROM TIME TO TIME. REPEAT REMOVING CLAMPS AND UNPLUG TIL SCREEN FADES. HAVE TO REPEAT SEVERAL TIMES OCCASIONALLY WHILE HOLD OR PRESSING RECON BUTTON.
Do you charge it normal and then put it in recon mode ? I put mine in recon mode but it not show percentage or the amp
Oh my god? Five years? Dude!
lol that's bullshit you will never get anything done properly without air mixture valve and high pressure regulator
Fishin' and Fixin' shxt, What Horsepower and RPM is the motor. I have that exact same saw as well as the Jointer/Planer unit that was made at about the same time. Unfortunately its all disassembled and I only have one motor. Not sure where the motor should go planer/Jointer or the Table Saw?
I'm afraid I can't answer your question as I no longer own the saw.
@@fishinandfixinshxt6660 Thanks for the reply I was hoping ;)
Is this a Vector in Black and Decker clothing or the other way around?
Black and decker junk.
I have this unit... It has paid for itself. Now I am reconditioning a battery that is in good shape... But I notice that when the unit automatically goes into "Charging Mode" after reconditioning it shows the voltage as continuously dropping! WHY? Is this showing the amount left until full charge?
Unless I'm mistaken as the battery gets closer to fully charged, the indicator will show a continuous reduction in the charge rate until it reaches the low "float" level, which maintains the full charge.
When it says FLO, it's done...you can pull it off. This means Float charge (trickle charge).
It'll start a vehicle with a dead battery in 90 seconds. Mine has several times, non fail!
Adding a clear instructive commentary and keeping things in camera view would be an enormous help.
This same charger casing is a Walmart Ever Start, Stanley, now BD!
And Home Depot under the Vector label.
Mine does not show the amps.. but does seem to work!
You got a potty mouth. I turned it off.
Question: what the FLO mean on my charger?
It means that it is "Float" charging. It drains the battery a little and then charges it back up to keep it active and fully charged. "Float charging is the technology and method of maintaining a battery in the charged condition by applying a continuous voltage and current at the minimum level to maintain a full or near full charge."
Thank you for sharing your knowledge, repair seems to be going out of style with a just replace it mentality 🤨. I have a metabo we 9-125 quick that I want to use at its low end of the rpm. It only wants to spin at higher rpms and if I turn it down it doesnt want to keep spinning with any sort of light pressure. Then it surges with power suddenly. The brushes have small grooves where the springs hold them down, is it time to replace? Any other parts that may be the culprit? Thank you again ✌🏻
While you're checking the brushes, check for loose/charred connections where the leads from the brushes go into the field. If I remember correctly they tend to have issues at these contact points. I've seen the receptacle where the spade goes into the field widen from vibration, make intermittent contact, and end up black from the connection arcing. You can usually squeeze them tight again and file off the spade. If that doesn't seem to be the problem, you might have a bad electrical unit. You could bypass it and use an external speed control. Harbor Freight makes a router speed control that should work.
Good, but the foil language, "sh_t" etc. is not appreciated by many many people but they just don't say anything. What if a kid watched this? Is this the way most parents want their kids talking? And does your language please God?
1) I'm am atheist 2) These words only have power because you give them power. They're just words. 3) Please keep your ideologies to yourself. You do you, I'll do me.
@@fishinandfixinshxt6660 I asked a question. I did not give an ideology as you did. You need a testable hypothesis to be a legitimate atheist. What is your hypothesis for the origin of the universe? Is it: Unintelligence produces intelligence? That is your hypothesis. Correct? If so, what is your test to support it?
@@fishinandfixinshxt6660 So you can't reply? See how my words have power to silence you? (Because you give them power!) Your best future is going unconscious one day and being eaten by worms in your grave and never seeing your loved ones again. You have an absolutely hopeless and useless future. But I have an exciting eternal life of fun ahead of me!
@@churchrapture LOL! I'm just too busy living my life to mess around with Internet trolls such as yourself. Take care, my friend!
Mine's in recondition mode no matter what, with any battery. Dead kitty.
My father got me this for my birthday. Hooked it up to my Mustang which sits in the garage a lot during winter and immediately went to reconditioning. Let it sit on that overnight and unplugged it and now the LCD screen just flashes on and off even when unplugged until it finally runs out of power. I'm guessing it's a defective unit?
Thanks very much for the helpful video. This looks like a great unit, and I just ordered one. Thanks again.
Thanks for the video. What is the stone for seating called?
It is called a commutator stone. Easiest one to get a hold of might be Milwaukee part number 61-40-0310
Holy shit. Thank you
Take a look at this one on fire. th-cam.com/video/xepLMvRBuCs/w-d-xo.html
A joke ,it measure 9,6 volts on my old batery while the voltmeter measure 11,8 ,and when trying to charge it ,it flip to reconditioning ,like for 14 hours ????? WTF i need to use my car ,so i when and i bought a new battery and then i measure it ,9.5v ,a brand new battery lol and when press charge ,it when to " reconditioning" too smart for me ,BS ,i my way to return it .
Mine is toast after 2 months
Puts it closer to the heat! Probably works better on an electric stovetop, too.
Yea
It will work to
But its only for small stove
If you got the jet stove like in chinese restaurant you wuld burn the food
Nuvvu chesedi anto Melina ardham avuthundha
I bought the BC15BD 2 days ago and put it on my Lawn Mower Battery that I just bought last week that went dead trying to repair my John Deer Starter. When I tried to charge the battery it kept going straight to the recondition mode. My battery was reading 2.7 amps and it still went to recondition mode. I tried to use the Engine Start mode a couple of times and it brought my voltage up to 12V, But then I tried to CHARGE again and it kicked it back to Recondition mode. The battery is only 2 weeks old and I cant get it to hold a charge or even get the BC15BD to charge it. Any solutions or help with this??
Batteries can be bad off the shelf. Is there a "born on" date on the battery anywhere? Perhaps it sat on the shelf long enough to discharge. When a battery sits discharged it tends to go bad. I would take the battery back and exchange it. Maybe grab one from the back of the stack where they put the fresher ones, like produce at the supermarket.