วีดีโอ

Each piece takes approximately 4 hours to print, followed by 1 hour of post-processing to prepare it for wrapping.

Thanks brother

I've conducted several tests with a 12-inch Zeroflex subwoofer, achieving a peak of 143 dB at 48 Hz. The challenge was that the car's structure had openings, causing a loss of cabin pressure. Now that the vehicle is properly sealed, the expectation is that the subwoofer should produce lower frequencies more effectively. However, my goal is to achieve a bandwidth from 30 to 50 Hz. for the desired mode

Cheers, buddy located in Melbourne, Australia,

I 3D printed these items, and they are available for purchase on my site. Cheers, buddy!

Not yet buddy. I might bring it to the meeting.

I might cast it in clear resin. That will be fun!

After observing everyone's work, it will motivate me to finish sooner. I will definitely arrange a workshop tour and meet at ACW in Preston. It was great to meet you. love your installation and what you have done.

3D Pen Recommendation; Myriwell RP-100C 3D printing pen around $90 to $100 if you look around online.

@@ACW3DDesigns wow I'm going to try one on my sail dash cubbies instead of wire. More control and fineness.

You will love this process for what you do mate, perfect tool.

@sqcaraudio It is All about experimenting from here like a chef, buddy. if you want to try it out, happy to lend you mine since we are locals. , have heaps of filaments for free.

You can download the file, print it yourself, or find someone local to help. Share the results on the Facebook Group page "3D Car Audio cheers" www.crealitycloud.com/model-detail/64341a98595a20be92cea8b9.

"Please message me with details so I can create a custom solution for your build.

Would this be a one size, fit all wave guide or is it driver specific?

​@@ericthompson4644​ its 1 size for this model. You can fit any driver on it just will need to make the adaptor to fit the driver you're using. here is a link to Download free . www.crealitycloud.com/model-detail/666fe61399cd38ac0d2b2ac8

at some point as I have a few of these as well

Petg is PERFECT!!!!! The file is available for free at the the Group page.

Fill free to reach out to me if you want any models for your channel, Happy to share

"I apologize for the delay, as I've been occupied with other tasks. However, I will soon provide an explanation of the theory and how it can aid in end tuning within a car environment. Essentially, by adding more center cords, you can widen the mouth of the waveguide."

Find me here will work out a price and delivery to you. few options I can give you. facebook.com/AudioCarWorld

"Absolutely, it would be helpful. You can download the STL Files for this and mix it according to your preference. It doesn't come with a logo, so you can match it with any brand. That's why I left out the screw holes in case of mounting direction. The face where it screws on is 3mm thick, so it's recommended to pre-drill it."

@@ACW3DDesigns mines for a tweeter on an a piller, I made my own. Thanks!

@@jonbourgeois8390 join the Group buddy and share your creation. We would love to see it in the group.

facebook.com/groups/3dcaraudio

PM me and I will give you a STL of the OEM. if you downloaded the file you are free to mix it and make it yours to share. just spread the love.

Cheers if you want to see the outcome refer to the link to see them printed in the car. or head the FB Page. facebook.com/photo.php?fbid=753456213232749&set=pb.100057051316996.-2207520000&type=3

Sorry, Buddy, I should have communicated this more on the Video. Here is where you can reach me ... I run an Architectural office full-time and do car Audio as a hobby, not a living. I did own my car audio shop back in the 80s and early '90s' and focused on Custom Fab then left it all to become an Architect from the skills I developed from Car Audio. It was very similar in Processes and a great course if you know the Fabrication Process. Certainly, did look at making these at one stage but don't have the time for that side of it anymore. Was hoping for you people to make them. Trying to spread the tools I learned in Architecture for Car Audio Application. . facebook.com/groups/3dcaraudio.

PM me on FB facebook.com/AudioCarWorld

facebook.com/groups/3dcaraudio

I can message me on FB facebook.com/AudioCarWorld

ohhh!! That will look great!! Would be great if you could share this with the Group when done.!!! will be running challenges soon with the 3D Car Audio Group. facebook.com/groups/3dcaraudio

been looking at this as an option. For automotive thinking ASA over PETG, although still need a controlled environment to address stringing and offgassing... My application is a 96 Rover Mini Cooper, and trying to figure some customer pods for the door card, and a custom box for under the back seat possibly some 6.5 ported. I love this type of innovation.

Yea if this was made for a stereo integrity m25 tweeter and m3 mid I'd buy a set. But 6.5 is way to big.

I will do this for the next project thanks for the feedback buddy.

@@kylevanwinkle2081 I like that. coming soon

yes buddy , reach out to me if you want one

Can you make the end caps for the 1997-1999 Rockford amps?

The brand is called Auraum. made in Australia Melbourne . look them up. need any help reach out to me on the FB Group. Audio car World Group.

something like this will set you back 2k completed . cheers

What cnc machine is this?

no you need to design box then others software for g code. cheers