วีดีโอ

also were you running your airbox?

Malossi variator polini 5.5 weights polini clutch

Scooter swap shop and scooter tunning Canada they have everything

Horizontal minarelli if im not mistaken

​@@Edgardovlx600 you are right

Yeah lots of hours on it 💪

@@Edgardovlx600 It paid off. I want to hook up my Honda but I’m not that talented. Bro props, it hauls.

Hi. Tecnigas silent pro pipe and 19mm dellorto carb. malossi kit. Thanks 👍

@@Edgardovlx600 ditch that technigas and go to a Yasuni if you can, watch how your kit feels after that. That pipe is horrible for bbk bikes. Yasuni R if you have the extra cash, it will be well worth it trust me

Hi the best way is removing the caliper and make sure of the spring position, is kinda tricky. I know the first time change sucks...

@@Edgardovlx600 thanks 👍

Update.. perhaps the newer buddies have different brake pads than the older ones the new ones have two square pads and tabs that stick out.. all I had to do is remove a little c clip pull the small bolt out.. and remove the spring clip.. pull the pads out by the tabs. Out though the back opening. wiggle the new brake pads in to place ..though rear opening in to the opening in the calipers.... Replace the spring clip retainer... Then line up the bolt. To the holes in the pads and the spring clip retainer.. break through the calipers out the other side.. clip on the seat clip.. was so easy and I did not have to remove the calipers... Perhaps some of the older buddies have brake pads. Similar to the 120 and 170 buddy.. but the 50cc are completely different... They get removed through the back opening in the calipers

Malossi sport 70 cc dellorto 19 mm polini sport variator yellow spring in the clutch and silent pro pipe that's all.

@@Edgardovlx600 Thanks! Nice video and scooter btw.

If you do the kit you are gonna have to get rid of that pipe, it will destroy your kit

At the end of the set up was running 65 buddymiles

@@mikecooper7191 what pipe would you run one of those ones that look like a foxhorn..lol

@@glenmones713 lol they look like that for a reason, they are called expansion chambers or flip pipes. Those bends and chamber help produde power bands at certain rpm levels. Some pipes good for sport use, which is basically like adding a littke noise to your stock motor, they dont really have sufficient enough expansion chambers for kitted bikes. Best pipe you can get in my opening is the Yasuni R for the Buddys and Roughhouse, especially one that has a bbk. I run the malossi cast 70cc kit, i had an. NCY sport pipe, it totally suffocated my kit, buke ran like shit. I put that Yasuni on and my bike hits 55mph all day long on the GPS, I havent topped it out yet its got plenty more

180 St bridge

Alexander Hamilton bridge 🌉

@@Edgardovlx600thanks .. the bridges looked familiar but it's been a long time since I was in that part of the city .. safe ride ❤️🙏

Its called clearing the cylinder. You are actually supposed to do that, basically cools the cylinder down on 2 strokes.

@@mikecooper7191 thanks

Hello I just bought a little longer screw to get the pipe from the base. That's all

Hi Michael, I have my buddy for 1 Year ready and I recommend you go 70cc sport on the cylinder and the variator.1500 contraspring and the same clutch (the yellow ones). The Dellorto 19mm carburetor with the malossi intake works perfectly with 98 main jet on it. And for the exhaust pipe tecnigas to keep the noise down ⬇️ and a racing one like polini race 4 or Yasuni C16 to make some noise up⬆️ and some extra mph. Let me know if you need any help or advice, thanks

Primo windscreen...+5mph .. plus keep bugs / acorns .etc from hitting you also duck behind if it starts raining.... Add a scooter works non-catalytic exhaust..130 bucks ..+5mph ..total +10 mph .. I did not do any rejetting on the carburetor I left stock still got true 40 MPH on GPS LEVEL GROUND .....(=45 mph on speedo .. all scooter speedometers read 5 MPH.faster than you're actually going)! Slight down hill aTRUE 45-50 MPH .via GPS confirmed

Yeah

@@Edgardovlx600 how much ?

1800

@@Edgardovlx600 where is the bike located ?

@@zwest549 garage 162 St Bronx

More torque and a little more rpm, works great on 50 en 70cc sport cilinderkits. Silent en drivable at all speeds. When u use your scooter every day this is your best choice

88 it's the best 1 for me

@@Edgardovlx600 sounds like very well adjusted, how performs the team 4 on a 70cc Sport? Im riding a Beta ark AC with 50cc Malossi Sport 17,5mm Dell Orto and Yasuni Z but looking for an extra exhaust

Give me a huge difference.. a lot of power but you have to change the packing of the pipe regularly

@@Edgardovlx600 try putting liquid seal on the packing, it hardens out and sticks very well. Problem solved. Malossi sport 70 is a great kit, drove it up to 40000km without any problems on a malossi crank with Gianelli shot and dell Orto 17,5mm. Lasts very long with normal use and regularly changing your air filter element

No I don't change it

@@Edgardovlx600 thanks for the help man

I was going 51 mph

@@Edgardovlx600 thanks i just bought it put it on my typhoon 70cc dr cilinder 17.5 delorto 7.5g rollers but it doesn't go anywere like 60km/h tops like 37mp/h does it have a restrictor of some kind that you have to take out ?

Yes, Tecnigas silent pro comes with 2 two restrictions, 1 one at the beginning and other at the end.

@@Edgardovlx600 thanks man I almost sent it back

how do you remove the restrictions ?

I bought it on Amazon last summer for$16. I don't remember exactly, but I think is a 6,000 lumens h4

Thanks I'll look, I got 1 awhile ago but it was to big and I didn't want to cut anything out. I look forward to more videos of yours

Malossi sport 70 bbk, malossi variator, malossi 1500 springs kit, malossi bell, Dellorto 19 mm kevlar belt and 7 gr.polini rollers. Thanks for the question and lmk if you have any questions, like and subscribe, be safe out there

@@Edgardovlx600 thank you for the quick answer! take care thanks

@@Edgardovlx600 what size belt

Beta ark 50cc malossi sport, malossi VL12 membrane, dell orto 17,5; 95kp/h. Silent and drivable at all speeds

Are your weights and drive assembly stock, I have a stock one I deleted my air box and out a pod filter and deleted my restrictor I want to keep it 50cc do you think the pipe and a bigger carb will be good?

@@nickmakamea1091 I changed everything but If you want to stay 50cc the right jet on your carburetor, filter and a pipe definitely will increase the power. Just have to be patient and find the best setup for you

Malossi sport 70 bbk, malossi variator with 7 gr. Polini rollers, malossi1500 springs, Dellorto 19mm malossi kit with original jets. Thanks for question about it and let me know if you need any help.