วีดีโอ

Most of it was

As with any quadcopter/hexacopter or other RC vehicle, you need: A flight controller X brushless motors (4 for quadcopter, 6 for hexacopter...) X ESCs (electronic speed controllers;one for each motor) Propellors suited for the size / power output / motors and batteries of your drone A lipo battery (4s or 3s generally for this size of drone) A receiver and transmitter to control the drone If you want to make it autonomous, you also need a GPS and some sort of Telemetry device (transmitter on the drone and receiver on a computer) That's pretty much it! Any questions? Good luck!

Here it is! This is for L293D motor control. Pretty similar to with a motor controller shield. Hope I could help! char data = 0; void setup() { analogWrite(5,0); analogWrite(6,0); analogWrite(9,0); analogWrite(10,0); Serial.begin(9600); } //Motor A: 5,6 //Motor B: 9,10 void loop() { if(Serial.available() > 0) { //For bluetooth data = Serial.read(); Serial.println(data); if (data=='1'){ //forward analogWrite(5,255); analogWrite(6,0); analogWrite(9,255); analogWrite(10,0); } if(data=='2'){ //back analogWrite(5,0); analogWrite(6,255); analogWrite(9,0); analogWrite(10,255); } else if(data=='3'){ //right analogWrite(5,255); analogWrite(6,0); analogWrite(9,0); analogWrite(10,127); } else if(data=='4'){ //left analogWrite(5,0); analogWrite(6,127); analogWrite(9,255); analogWrite(10,0); } else if(data=='5'){ //stop analogWrite(5,0); analogWrite(6,0); analogWrite(9,0); analogWrite(10,0); } } }

Here it is! This is for L293D motor control. Pretty similar to with a motor controller shield. Hope I could help! char data = 0; void setup() { analogWrite(5,0); analogWrite(6,0); analogWrite(9,0); analogWrite(10,0); Serial.begin(9600); } //Motor A: 5,6 //Motor B: 9,10 void loop() { if(Serial.available() > 0) { //For bluetooth data = Serial.read(); Serial.println(data); if (data=='1'){ //forward analogWrite(5,255); analogWrite(6,0); analogWrite(9,255); analogWrite(10,0); } if(data=='2'){ //back analogWrite(5,0); analogWrite(6,255); analogWrite(9,0); analogWrite(10,255); } else if(data=='3'){ //right analogWrite(5,255); analogWrite(6,0); analogWrite(9,0); analogWrite(10,127); } else if(data=='4'){ //left analogWrite(5,0); analogWrite(6,127); analogWrite(9,255); analogWrite(10,0); } else if(data=='5'){ //stop analogWrite(5,0); analogWrite(6,0); analogWrite(9,0); analogWrite(10,0); } } }

Hello ! It sure is possible! The question is how hard it is. If you are the one sending packages, you need to know all of the coordinates of the receivers. You need to find a path that doesn't go near airports and such. The legal part is much more complex than the electronics of your project. The method I used in the video will indeed work to do such a project. You might need a longer antenna or use different kind of communication like GSM for telemetry or sending commands. But the app I used in the video works great. Good luck!

You supply the camera with a voltage. The output you connect to a transmitter. You then use a receiver and a screen to view the image.

@@electronology4665 can I also conect the video output to controller and then display it on screen???

@@chinmaykulkarni7835 It is on 5.8ghz analog band. Camera to VTX and VTX broadcasts to anything 5.8ghz reciever

If you are talking about the software showing the graph, it is called Processing which you can download here: processing.org/download/ Here is the code I used: (you need to connect the arduino to the computer and Processing will collect that data) //Modified for a wind tunnel by Electronology // Graphing sketch // This program takes ASCII-encoded strings from the serial port at 9600 baud // and graphs them. It expects values in the range 0 to 1023, followed by a // newline, or newline and carriage return // created 20 Apr 2005 // updated 24 Nov 2015 // by Tom Igoe // This example code is in the public domain. import processing.serial.*; Serial myPort; // The serial port int xPos = 1; // horizontal position of the graph float inByte = 0; void setup () { // set the window size: size(1400, 800); // List all the available serial ports println(Serial.list()); // Open whatever port is the one you're using. myPort = new Serial(this, Serial.list()[0], 9600); // don't generate a serialEvent() unless you get a newline character: myPort.bufferUntil(' '); // set initial background: background(0); } void draw () { // draw the line: stroke(127, 34, 255); line(xPos, height, xPos, height - inByte); // at the edge of the screen, go back to the beginning: if (xPos >= width) { xPos = 0; background(0); } else { // increment the horizontal position: xPos++; } } void serialEvent (Serial myPort) { // get the ASCII string: String inString = myPort.readStringUntil(' '); if (inString != null) { // trim off any whitespace: inString = trim(inString); // convert to an int and map to the screen height: inByte = float(inString); println(inByte); inByte = map(inByte, 0, 60, 0, height); } }

@@electronology4665 Thank youu Sooo much broo, Merciiii

@@electronology4665 Thank you so much for the video. I had some problems with graphics and I need your help. When I run the software I get the following error and a blank non-working black graphical screen appears: "map(NaN, 0, 60, 800) called, which returns NaN (not a number)". Can you help me to overcome this problem? Thank you.

That probably means the arduino isn't sending the correct data, for exemple, if it's sending text. Try printing the data from the arduino IDE and making sure it's numbers

@@electronology4665 Thank you.

haha same, love from morocco!

Ah yes indeed !