วีดีโอ

Heads up for anyone watching this video and is having an issue with their heat slider not working. You can snap off the plastic for the heat slider using a prying tool (e.g. thin screwdriver or butter knife) without taking the iron apart as shown in this video! My slider snapped internally so I couldn't get the iron to heat up. Removing the heat slider allowed me to access the rotating heat dial which the slider uses to turn it clockwise/ counter clockwise.

Where do you get those bulbs?

I have a 2008 Sienna XLE that Im installing an android radio into right now. Do they require a canbus box for the steering wheel controls. My radio came with a direct plug and play harness that included steering wheel control wires already and they dont work lol.

God bless you brother, you saved us from freezing this weekend. thank you so much.

Dude you saved me. Used the tooth pick and bang starts working. I owe you one

Did you install the ATOTO screen protection and also hook up a backup camera?

Did you run into any fitting issues with the Scosche Double DIN kit? I'm installing at Atoto F7 into a 2007 Sienna using the Metra double din brackets. They look nearly identical to the Scosche kit except they are too narrow, and the stereo doesn't mount flush in the Metra brackets. I ordered the Scosche double din kit after seeing your video. Thank you for posting it!

TH-cam FUCKING SUCKS ASS!!!!

Thank you for the knowledge, success for "Mr. Fix ..." ... Pekalongan, Central Java, Indonesia attended

I has a three blink error message on my Trane XV80 furnace. I tried the things you recommended on my pressure switch. It started up after a brief waiting period. I had battery corrosion in my thermostat that I thought could have effected it’s functioning after 20-years. I installed a new thermostat and reprogrammed it. It will interesting to see if the furnace follows the program and turns off and on normally to the desired temperature settings.

It's the weekend, wintertime, and my trane went out. No heat. So happy I watched your video because it solved my problem. Thank you!

look so good. everythings is so far so good? is there any problem? Thanks

That's so cool. Will this work on 2011 sienna?

Worked as promised. It took as longer to watch the video than it took to get the system back online. Thanks!

Very cool! I’m getting a old kenwood double din from my brother to install in our 06 sienna. But a part of me wants to have apple CarPlay! I will save this for the future!

Thank you!! Blew out the hose, scraped away some build up, and back in business.

My furnace kept turning on and off. I reset the power and it worked for a few hours and then went back to messing around. I followed this fix and it worked. Been running all day, thank goodness.

Good job. Thanks for the information.

Sucking or blowing in the tube does absolutely nothing the only fix is to run with the tube disconnected from the pressure switch which clears the 3 flash error code and then it might run a year or so and then bust completely forever and them buy a new furnace that isn't Trane and throw the old furnace into the nearest lake. Trane furnaces are the worst furnace ever made.😁

Worked for me. Thanks.

Thank you so much. Blowing into the hose that’s connected to the pressure switch fixed my problem. Do you suggest I get that pressure switch replaced as soon as possible or should it all be okay from now on? Heat is working now. Thank you so much

About to have this repair done this week, wondering what is a fair estimate for labor and parts for this repair?

Dude, you just saved me a call to the Pro. Thanks!!

Thanks, you got me through the night, it worked. Much appreciated.

Thank you!!!! Totally worked!!!!

what are you talking about the air filter. the air filter would have nothing to do with the pressure switch.

Dude, you totally save us! It worked! We can’t thank you enough for creating this video!!

Thank you Sam. You video recommendation re the tubes worked perfectly!

Wow ! first reset the system- Trane err 0079 (low air pressure switch opened) message came back. Completed the process in this video - regarding the sensor tube. The code was cleared and system is back to normal operation. Thank you Sir !

This works 💪 👷‍♂️ Thank you.... you save my family from a freezing cold night

Thanks for the help, and the heat.

This video saved me a lot of money . Thanks for the information

One thing I didn't see mentioned is the tubing on my Pressure Switch was getting soft, 15 years old, and had a loose connection to the switch. Replaced the tubing and that was the problem. Available at Big Box Stores usually in 10ft lengths. Cheap fix!

Your video was a GOD SEND.

Mr. Fix It, you're a genius......I followed your advice at on my XV90 and cleared the pressure switch tubing.........Works like a champ now.........THANKS.........

This helped me to disassemble my sunbeam steam iron model 4268. there is no heat. I suspected my thermal fuse is bad but not able to read thermal fuse spec. what is your sunbeam thermal fuse temperature rating. Thank you!

I dropped my iron (SR6856B) this morning and the front has come free. Really helpful video to strip down to the base plate to see if it is broken or just loose. Thank you.

My units pressure switch is a TRIDELTA FS6089A-1912 that is out of production - do you know its replacement?

Very useful, thanks.

Thanks great 🙏👋💐

The funny thing I've been holding onto about for urns for years just to learn how to take it apart this was very informational I really wasn't being cheap I just wanted to know how and the wise I want to understand the heat element and why they go out but cool video

Sincere thank you! This video helped to get heat back in my house. February in Wisconsin!!

I was getting the pressure switch code. Found this video, cleared the tube and bam - hot air again. Thank you so much!

Happened to find a way to fix the problem without having to open the unit. I have a Trane XV80 and experienced three red blinking (unit won't start) problem once in this summer and once in this winter (today). In summer problem, it refused to turn AC on. On thermostat, I turned Fan from 'auto' to 'on' (Fan 'on/auto/cyclic' switch) while set it to 'off' on thermostat System 'cool/off/heat' switch; the fan started and let it run for some time. Then I turned thermostat System from 'off' to 'coo' and the cool air coming. Then turn Fan from 'on' to 'auto' and it continued working. In winter (today) case, it refused to turn unit heat on. This time, I tried it again and happened to turn both Fan from 'auto' to 'on' and turn thermostat System to 'heat' at the same time. And the noticed the hot air came later. After it was fixed, it ran good until it happened again after about six months in my case. I still don't know what might cause the problem. You may use the following procedures to try your luck: - Turn Fan (on/auto/cyclic) from 'auto' to 'on' and System (cool/off/heat) to 'off'. You shall hear the fan started and air flows. - Keep it for about 5 to 10 minutes. - Turn the System (cool/off/heat)from 'off' to 'cool' or 'heat'. - Wait for another 5 to 10 minutes and monitor if the AC or Heat is coming. - If not working, repeat this procedure several times. In my case, it took me about three times and then the AC/heat started unexpectedly at some time. I may be able to improve this procedure if it happens again in future. Share my experience here as it does not require to open the unit. As everyone's problem can be quite different, you may still need to try what "Mr.Fix it" showed in this video or need a technician. Anyway it's good to give it a try as your first step.

Echoing what the others here have said. Pulled the tube, blew/sucked on the tube, blew/sucked on the port, connected back up. WORKS. I'll note, most of the particulates I cleared came from the port going behind the fan wall. Not much came out of the tube connected to the sensor. Thank you sir.

Thanks... the fix worked perfectly and saved me a service call !!!

I hate to nitpick... ... actually, I L O V E to nitpick... but those aren't screws. those are bolts. here's the difference : screws need a screwdriver.

Hello just want to say thank you the sucking and blowing worked :) !!! I had my furnace and vents cleaned but after the company left my furnace would not turn on, I followed the panel and seen the three flashing lights and found your solution and it worked :) Thank you so much!

Sir, thanks a million!

I was grumpy and cold (It's winter in canada) followed the video and now I'm grumpy and warm. I am incredibly greatful for the quick and easy video instructions.