วีดีโอ

Oooo that sounds interesting. About 27 inches to 11 inches...yea that big. Yea let me know how it turned out I'm curiouse how it will hold together. Glad it helped and good luck @Mobackenracing.

@@compasslayouts If things go as planned I will have a video of the first test start on my channel late this winter. It is a big bastard and will consume 10 liters of kerosene per minute at full throttle so I really need to get the air into the compressor as smooth as possible to minimize flow losses.

Really bro, that's a first? Wow thx my friend. I'm glad it helped. Just remember once you start getting the hang on doing these layouts..my ways are not necessarily the correct way but that there are other ways of doing it and if your confortable.doing it your way and the outcome is the same By all means doing your way. Have a good day.

Glad it helped

Glad it was helpful!

Glad you enjoyed it

Yea you can appreciate it more when it's 3 dimensional. You know l, that's how I was able to combine both of these shapes to well take on the shape this video shows. Yea, I'm wondering 2 if there's a way to make pedals or leaves from a plant by playing around with the layouts and get it close to resemble one.

Jake, I'm glad that it helped in some way and those comments go a long way and motivate me to keep going and find ways to make it easier to understand. Have a good day.

Hey @xximstupid great question...so pretty simple. Once your layout is done, I put that paper on top of the material your going to cut it out of...I'm assuming aluminum or steel sheet and use a center punch on every corner of the template and then connect the dots. It's a great way to do it on paper then transfer to the material because you can position the template and get as much out of a sheet Hope that made sence..hmmm.. I may do a quick shorts on how the transfer looks like but yea..use a center punch or something you can prick every corner with something like a nail and a lite tap with a hammer.

@@compasslayouts Thank you! That's such a simple method

Glad you enjoyed it! @totally_not_bot

Oooo a pentagon...hmmmm....you got me curiouse...gonna see if I can do one and if I can, I may put it up. Thx for the idea @jonahunderhill

Yes, even if the circle goes outside the square and it's evenly out up down left or right like an cross position, it should be the same. But once you start putting that circle at an angle like an x , that's what I call extreme offsets and instead of doing (2) true length triangles, you'll have to do (4) true length triangles..one for every corner....hopefully you seen those old videos that are three part videos. Hope that helps.

I learned this from a good friend of mine along with co workers or at least the basics of what was required at work. I then started practicing and looking for other ways that could be efficient or make sence to the beginner. I try to make it understandable and especially easy to see the lines. Lol you still got me thinking of that pentagon...can't wait to try it out.

Much appreciated @saikhunkhay3617. Have a good day.

350 round to 450 round straight centered so it's a cone? 350mm = 13"3/4 and 450 mm = 17" 11/16?

Thank you @EMWINMA, hope it helped.

Thank you!! 😊

Much appreciated @user-yw7ck9bv2e. I'm glad you understood it and comments like that keep Motivating ne to keep going.

That's awsome...yea I wish I learned that in high-school. It would have opened a lot of opertunities knowing stuff like this at an early age.

Glad to hear that

Thx so much @justinsinkala.

Goodmorning Kris...yea a 20" diameter would be the same steps as the 8" or anysize for that matter. I'm curiouse as to what your building with a 20"? Have a good day Kris.

​@@compasslayouts we make a water tank sir .. thanks your video sir ❤❤

Thx @justinsinkala, hope it helps you.

Hola @paulohenriquesampaio6243 , esos los puede encontrar en Amazon que les llaman "dividers" o tambien en la tienda de Harbor Freight. Que tenges buen dia.

Can you please be more specific? I'm assuming you asking about a slip roller?

Thank you @phillipsin6102. Hoped it help you and have an awsome.

Sir your What's App number give

Thank you very much @moinulislammolla5536. Comments like that motivate me to keep uploading knowing it's helping someone. Have a good day.

Happy to hear that!

Glad you like them!

Glad you like it @stavoebi3054

Ooohhh with no divider tool (compass). Wow that's pretty big. Well dor starters, seeing how it's a big cone, I would do it in (2)pcs. I would use the same methods like my video called Round to Round Cone...A faster Way. I would probably use a long pc of 1x4 wood and drill a screw on one end acting as a pivot sharp point and on the other end secure a pen or a sharp object to act as a divider and use that to throw your big radius. So on the 2 meters, what ever that is in total Round length, I would only do half of that so in your case only one meter so that way you have (2) half. I may attempt that in the future to show that there are other ways to make big radius arcs without a compass. So like how I mentioned on the video that I suggested to you, maybe after your done doing the big arc radius, use a string to trace the radius but only after you measured the string of the length you looking for. Hope it kinda makes sense but in the mean time I'll try to prep a video of that problem. Thx @dionisioerwinmontejo

Que raro que no lo deja. Pues espero que le haya ayudado y mientras investigo que esta pasando en mi lado. Grasias @adrianburgos8711

Seguro, estoy trabajando en eso.

No problem 👍

Glad it was helpful!

Glad you like it and thx @tumizooi202. Have an awsome day.

Thank you @Wilmuck

Thx @astilleros619

Much appreciated @siddhpuragajender8423. Hope it helped and have a great day.

Hope it helps. Have a good day @wilmuck

Hello @adrianrodriguezcruz103..glad to here that and definitely motivates me to keep going knowing it's helping you and anyone that needs help understanding these layouts. Have a good day.

Hi @paelojustinianoibarra1743. Good news, there is a video of that already made called How to make a (3) segmented 90 degree elbow...posted about 2 months ago. Go check it out my friend and enjoy.

The throat is determined by you depending on how tight in you want it or far out. The radius I'm assuming the diameter of the pipe. If so, then you choose the diameter size and you ×'s it by 3.1416 and youll get the length of the layout.

​@@compasslayouts lets say you are insulating an existing pipe on the field with sheet metal. how would you determine the bend? i understand the drawings but i do not know how to find that bend radius .. they use long radius and short radius elbows in industrial piping. is there a formula or a chart they use for center line radius? also there is faster way to divide your layout th-cam.com/video/uW3J5w1IMDY/w-d-xo.html

Thank you @matthewmonaghan1064 and happy that you'll use it to make life a little easier at work. Have an awsome day.

Thank you and glad it helped. More pipe layouts coming soon.

Cool. Glad it will help you.

Hey @chizzyoni2543. So the lines only reveal themselves once you finished drawing out your diameter, throat size, and finally your degree that you choose. Check out one of the long form videos that I show you how to make 90 degree elbows...maybe start with the video called- How to make a (3) segmented 90 degree elbow. Thx for looking and hope that helps.

That right there what you said is one of my goals...to try to make it make sense. Still more room for improvements as im just starting out putting out videos and not get shy talking to a camera. I'm glad it helped you out @elderkingsley.

🤔

@@compasslayouts kya huaa

Rolling ke liye

Thank you.

Hello @JahidHasan-hm9yb. Yes, I'll be uploading a big square to small round layout video next tuesday.