วีดีโอ

WHAT SIZE ARE THE O RINGS

What size are those blue O rings you installed?

Can someone explain how the pusher works? It pulls back with the sring and then releases before the plunger?

Thank you for a better look at the insides. I now know why its not out performing the harrier with all that extra plunger volume. This is another missed oppertunity for Worker.... At least they learned from the stuff up with the Harrier/Segull debarkle and used metal internals this time round. Guess I will be working with SABRE again to fix this one up too...

if i didn't recently buy a clear edition kirin days before the kunlun was announced, i probably would've bought one.

Wow, thats a very cool insight to the blaster and to the designer. Can't say Im a fan of how large the magwell looks and that the magwell is connected to the front of the half of the blaster. Could've made some cool new barrel shrouds if the magwell wasn' 't connected. Or we can just design a new shroud and magwell front end.

Awesome look into engineering. These people really do think of every single situation and solution. I'm from the USA so I'm getting my Kunlun from OoD but wishing all the best to Foamwork Adelaide and the Aussie foam flinging community!

so good! can't wait to get my hands on one of these. Awesome video

You already sold me on blaster. Looking forward to ordering it on your store.

Awesome video mate

Did you find out about any top secret stuff worker is working on Worker AEB? 👀

I thought when I saw Worker stuff, about 4 years ago that they would be a 'Flash in the pan' company and soon disappear like most others have. But they have stuck around and have produced some of the best blasters in the hobby. I hope they stay around for a long time to come and keep innovating.

Hey Jay, when assembling the magwell with pre-compression, I'd recommend sticking a thin screwdriver in one of the lined up holes to hold the magwell in place. I use the same method with holding the motor/gearbox in place on my Storm when using the thicker springs. Works a treat.

How do you get the pusher to open and stay open like that?

Hey i just purchased and received the sabre and they sent me two of the same side spacers for the grip.. and i noticed when i prime the gun and shoot it the trigger doesn't lock into place after firing the gun.. so i push up on the plastic hand guard right at 4:30 its the end that is next to the part where you mount your grip. Once i push up on that the trigger locks back into place. Its doesn't take much force when pushing up on it.. any ideas what this could be.. my other idea is when i get the grip and the weight of the gun is rested on my hand that it will continue to lock after that

Would this go through customs when it's shipped to Australia? I ordered it prebuilt with a grip from FrontLineFoam.

Airsoft?

Bro has it in the California Compliant configuration

Not really able to see what he is doing. All off the bottom of the screen.

Just bought your hardware kit for the SLUG wondering where I get the STL to print the rest. As I think you hardware kit differs from the original.

fellow aussie here - i am DYING waiting for the files to become available to print this! my 3d printer is ready to go!

will add the taran tactical branding and call it the TTI Disc Master Block 26 with a rose gold barrel and a two tone slide :D

Is there any way to prevent a fuse from blowing? I heard you say in another video that it happens with new springs.

Wicked vid, heaps easier to see the shaft position and great job explaining it, I may have to try and get the bigger spring to work again

nice vid cheers jay cant wait to get mine

what is the difference between the 2.0 and the 2024 version

Just got my storm, and while I think I have jams taken care of it seems to sort of fart the darts out. Any ideas on how I can fix this problem? It’s like it shotgun loads the (brand new darts) into the barrel (so multiple darts in the barrel at a time) and then gently blows them out, if I’m lucky.

What size is the o-ring on the pusher?

Thanks for the info. Unfortunately the Facebook link doesn't work.

Is this the version/specs we will be getting from Frontline Foam Pre-order?

Very cool. Please consider making a picture diagram indicating which is primary and which is secondary when it comes to colour selection.

Had so much fun for this little thing🎉 Great job of 118 design and Moose❤

Thanks Jay this helped alot😅

where can I get the grip from?

Nice video ❤ I’m wondering what is the diameter of the two springs? (2.0 and plus)

I’m assuming this blaster has a plungerhead of some sort with o-rings? If so, how are those serviced?

Will the pro model come in Purple? I really hope so.

I've finally gotten round to watching this a few times, and I'm so impressed by how compact everything is, everything just seems so tight without feeling flimsy; - the planetary reduction/connection doubling as a motor mount - the barrel/cylinder cam doubling as a spring rest - the plunger doubling as a pusher pick-up to facilitate the separation of the chamber/cock cycle - the pusher range control is such a good idea, and being able to fit the forward-push spring without holding in the mag - the body doubling as plunger Like this thing feels like it's really had a lot of thought put into it. I knew it was good, but not *this* good. What I can't figure out though, is how the plunger is held in place cocked. I imagine that at 7:08 that switch in the pink mount detects when the plunger is at the back, but I'm not sure how it's actually subsequently held. I wanted to guess that it was an electronic control, but surely without some means of reading RPM, there's no way to close it via PWM control over torque? And sure, shorting out the terminals would apply some stopping force, but surely even with the gear reduction we'd see that slider piece twitching, right?

Before owning a lipo powered blaster, what are some tips you can give me so my house dont burn down?

Is that battery 3s or 4s?

15:11 what size screws that go in?

what is the longest barrel to be used? What is the piston travel and diameter (displacment volume)? Thanks!

What are the dimensions of the spring?

What is the size/dimensions of the four grub screws you install into the pusher to control airflow?

Right I have a problem with the tube, I can fire but when I insert the tube can fire out of it

Looking forward to picking one up