- 167
- 606 336
The Scrap-Meister
United States
เข้าร่วมเมื่อ 6 พ.ย. 2021
Welcome to my channel. I'm Denny Payne from Wisconsin the Land of Sky Blue Waters. Scrapping has intrigued me since I was 9 or 10 years old. I've scrapped on and off a number of time through out my life. The first time was when my buddy and I wanted a set of Walkie Talkies. We Scavenged for Aluminum, Copper and Brass for weeks to get enough scrap to buy them. After graduation I went into the electrical trade for 5 years... and did a lot of scrapping. Years Later, I got into scrapping computers because a friend owned a computer store. Between getting his scrap and advertising for computer recycling I've scrapped out 1000's of computers over the years. But I never took scrapping to the next level. Well now at 60 years young I'm going to take it a little further. I hope you'll Ride Shotgun for me in my adventure. I promise to share everything I've learned scrapping over 50 years and hopefully entertain you along the way! So Buckle Up Scrappers... It's going to be an odyssey!
A Quick Look at the New Scrap Wagon! | You'll Love It!
A Quick Look at the New Scrap Wagon & what we're going to do to her!
มุมมอง: 34
วีดีโอ
20 Ton Stator Wrecker Assembly | Every Scrapper Should Have One!
มุมมอง 30714 ชั่วโมงที่ผ่านมา
20 Ton Stator Wrecker Assembly Our Merch Store: www.scrap-meister.com #thescrapmeister #stators
Scrapping a Vertical Fan for Copper | Fantastic Stuff Found
มุมมอง 1.1K19 ชั่วโมงที่ผ่านมา
Scrapping a Vertical Fan for Copper Wire and Motors! Check out merch store at: www.scrap-meister.com #thescrapmeister #copperscrap
Loading Non-Ferrous Metals to Cash In | Mega Weigh & Pay!
มุมมอง 1.1Kวันที่ผ่านมา
Selling Non-Ferrous Metals at Record High Prices and fun what did it weigh & pay. Visit our scrapper merch store at: www.scrap-meister.com #thescrapmeister
Finishing My Copper Stator Wrecker Blade | Things Get Real Dicey!
มุมมอง 47614 วันที่ผ่านมา
I this video I Finish My Copper Stator Wrecking Blade
Scrapyard Run - Weigh & Pay | Plus 80's Microwave, is She Copper!
มุมมอง 75614 วันที่ผ่านมา
Scrapyard Run - Weigh & Pay! Plus 80's Microwave, is She Copper! Check out our merch store at: www.scrap-meister.com #thescrapmeister
Scrapper's Update: - New Tool & Neon Vanity! | You Can't Take It with You
มุมมอง 27221 วันที่ผ่านมา
Scrapper's Update: - New Tool & Neon Vanity! You Can't Take It with You, putting the channel up in neon lights! Check out the shirts in our merch store at: www.scrap-meister.com #thescrapmeister
Scrapper Mail Call, Stator Wrecker & Hush Money! | You Need to Know!
มุมมอง 41721 วันที่ผ่านมา
Scrapper Mail Call, Stator Wrecker & Hush Money! Check out my merch store at www.scrap-meister.com #thescrapmeister
Preparing Scrap Copper/Aluminum ARC Rads | Like an Avalanche
มุมมอง 436หลายเดือนก่อน
Preparing Scrap Copper/Aluminum ARC Rads for maximum profit. Get cool scrapper gear at: www.scrap-meister.com #thescrapmeister
Scrapping Glass & Aluminum Shower Doors | Unbelievable Shatter
มุมมอง 531หลายเดือนก่อน
Scrapping Glass & Aluminum Shower Doors it's all extruded Aluminum so worth the squeeze :-) Check out our merch store at: www.scrap-meister.com #scrapping #scrapingvideo #scraping #thescrapmeister
Processing Dumpster Finds at My Workbench | You Can't Put that Down the Disposal!
มุมมอง 567หลายเดือนก่อน
Processing Dumpster Scrap Finds at my workbench to maximize the profit. Check out my merch store at www.scrap-meister.com #scrapping #thescrapmeister
How to Trade in Commodities & Win! | Little to No Money and No Risk!
มุมมอง 150หลายเดือนก่อน
How to Trade in Commodities & Win! | Little to No Money with No Risk! You'll miss the entire point of the video if you click away! Invest in yourself. Visit our merch store at: www.scrap-meister.com #commoditymarket #copperscrap #commodity_prices #thescrapmeister
Scrapping Copper Microwave Transformers | Bad Judgement, But Fun!
มุมมอง 929หลายเดือนก่อน
Scrapping Copper Microwave Transformers | Bad Judgement, But Fun!
Scrapping a Chair base for Cast Aluminum | What went wrong?
มุมมอง 513หลายเดือนก่อน
Scrapping a Chair base for Cast Aluminum | What went wrong?
Scrapping Ptac Fan Motors for Copper Stators | Like Money in the Bank
มุมมอง 783หลายเดือนก่อน
Scrapping Ptac Fan Motors for Copper Stators | Like Money in the Bank
Processing Copper from 6 Ptac Units | What does it Weigh?
มุมมอง 4822 หลายเดือนก่อน
Processing Copper from 6 Ptac Units | What does it Weigh?
Hotel Scrap Pick-Up & Ptac Processing | Like Money in the Bank
มุมมอง 3552 หลายเดือนก่อน
Hotel Scrap Pick-Up & Ptac Processing | Like Money in the Bank
Scrapping Photography Equipment for Gold Recovery and other Metals! | E-waste scrap
มุมมอง 4372 หลายเดือนก่อน
Scrapping Photography Equipment for Gold Recovery and other Metals! | E-waste scrap
Scrapping some Electronics & Scrap-Meister Hat Give-a-Way Details | You'll Be Styling!
มุมมอง 4122 หลายเดือนก่อน
Scrapping some Electronics & Scrap-Meister Hat Give-a-Way Details | You'll Be Styling!
Scrapping Microwave Oven Plate Turning Motors for Copper | Just Astonishing
มุมมอง 2812 หลายเดือนก่อน
Scrapping Microwave Oven Plate Turning Motors for Copper | Just Astonishing
Scrapping Microwave Transformers with Copper/Aluminum Windings | Fast Easy Money!
มุมมอง 6112 หลายเดือนก่อน
Scrapping Microwave Transformers with Copper/Aluminum Windings | Fast Easy Money!
Scrapping Microwave Fan Motors to Double Your Money | Surprising Results!
มุมมอง 2.7K2 หลายเดือนก่อน
Scrapping Microwave Fan Motors to Double Your Money | Surprising Results!
Scrapping a Vacuum Cleaner is it Worth the Effort | I'll let you decide!
มุมมอง 8042 หลายเดือนก่อน
Scrapping a Vacuum Cleaner is it Worth the Effort | I'll let you decide!
Scrapping Electronics for Circuit Boards | Plus Some Bad News :-(
มุมมอง 5843 หลายเดือนก่อน
Scrapping Electronics for Circuit Boards | Plus Some Bad News :-(
Scrapping Boards from Electronics | Mini Scrap Marathon
มุมมอง 5643 หลายเดือนก่อน
Scrapping Boards from Electronics | Mini Scrap Marathon
A Different Take on Breaking Down Hard Drives | It Really Depends!
มุมมอง 2463 หลายเดือนก่อน
A Different Take on Breaking Down Hard Drives | It Really Depends!
Scrapping an Industrial Circuit Breaker for Copper & Aluminum | A Battle Royal!
มุมมอง 5803 หลายเดือนก่อน
Scrapping an Industrial Circuit Breaker for Copper & Aluminum | A Battle Royal!
Scrapping Peloton & Treadmill Screen Monitors | What is Good in Them?
มุมมอง 2583 หลายเดือนก่อน
Scrapping Peloton & Treadmill Screen Monitors | What is Good in Them?
Best Side Hustle in 2024 | Never Ending Free Money
มุมมอง 3.2K3 หลายเดือนก่อน
Best Side Hustle in 2024 | Never Ending Free Money
Scrapping Dental Equipment for Copper Motor, Brass & Aluminum | Plug it with a Finger!
มุมมอง 2963 หลายเดือนก่อน
Scrapping Dental Equipment for Copper Motor, Brass & Aluminum | Plug it with a Finger!
There’s no possible way to make the money per hour in that thumbnail.
Thanks for watching! Yes... you could make even more than that right now with copper prices over $4.00 a pound.
Nice Denny...congrats on 5k subbs. Super achievement..DMK
Thank you very much! Are you ready to get back in the game?
Nice
Thanks and thanks for watching. Stay tuned for dumpster diving.
Good one ! I'll be making one of these soon!!
I like mine a lot... Nice for the smaller stuff.
Russia ban microwaves. They also banned GMOs. They care about the health of their people.
Thanks for watching... Very Interesting!
pool pump repair guy longwood fl 32750 approves TSM
I find pool motors are almost always, Aluminum Winding. Do you find that too? Thanks for watching!
@@thescrapmeister NO but yes
That's one way of dismantling them. Just brute force with a hammer eh, rather than mucking about with a hacksaw, angle grinder or hammer & steel chisel. I'll try it. Do microwaves in America plug into 240v like they do here in the UK, or they still only plug into 120v? Took a few apart with intention of making 240/50hz power inverter, saving the wiring for projects. Took some smaller high frequency ferrite transformers out of TV's, which are easier to take apart just putting them in the oven first. Learning how they work instead to get to 400 volts then use high powered Mosfets to attain 240v ac, tho' find it tricky to understand some of the maths involved.
Thanks for watching... Most all are 120v here in the US. Be careful repurposing them, they can knock you on your ass or kill you :-)
Very informative but I have to hit you up on your maths. You didn't incorporate how long it took to extract each transformer from each microwave... that's not really accurate unless you magically find a pile of transformers. P.S. please pay no mind to my mild autism, I'm compelled to say it, sorry.
Thanks for watching... yes, it take 7 minutes to rip a microwave, and you also get 2 small motors, and some wire. So that covers the time to take it apart :-)
This is a whole new world for me and it's really fascinating. I appreciate the quick reply.
How do ou claim $360 an hour ?
Hey, Thanks for watching... You would need to do 60 an hour :-)
That is awesome, I really want a press but will definitely have to wait until I get my bigger workshop lol!
You got that right... LOL Luck you can squeeze in there!
How many tweakers watching this? Lmao
LOL, not sure, but it is my most watched video :-) Thanks for checking out my channel.
Washing machine motors are better they have copper and aluminum
Lot more available too
Many of them are copper... I always check them :-) Thanks for watching.
77
Thanks for watching... no winner yet :-)
Chest rig is far superior to head rig with your camera.
I've never tried one... I might have to :-) Thanks for checking out my channel & watching!
Isolation...
I'm sure, thanks for watching:-)
Around $4.82 a pound Man copper's up huh. ❤❤❤
Yes... us scrappers are loving it. Thanks for watching:-)
Why not soak them in acetone for shellac?
The difference between the price of #1 to #2 is not great enough to make it worth the effort :-) Thanks for watching Brian.
@@thescrapmeister yeah l did my research and figured the same.
That is not $360 per hour work for copper
It's a hypothetical, Thanks for watching :-)
Nice buddy!
Thank you! can't wait to try it.
Looks like that should do the job !
I hope so... Your swag package should arrive Tuesday :-)
That's awesome! Thank you i appreciate it very much!@thescrapmeister
No I don't
Thanks for watching... we'll find out how good it works.
Fun times as always
Can't wait to see how it works :-)
Hey, Let me know... Do you guys use a press to cut stators?
Decent find, keep doing it 😂😊
Thanks, wish I'd find better stuff in the junk. Thanks for stopping by :-)
I have one of those oscillating towers. Now I know what to expect when it craps out. Great video buddy.
Yes, pretty good stuff, thanks for watching:-)
Keeping coils as is, could be used in generators.
Yes, I know. But selling them is a pain in the butt :-) plus, I get so many I couldn't sell them all.. Thanks for watching!
Always some nice copper windings in these. Let's start a group - "Blind Scrappers Anonymous."
LOL, I have glasses... Think I would wear them but no! Only on the golf course!
one is the high voltage coil. requires more insulation. by high voltage, i mean 2000+ volts
Yes... That is what others have told me :-) Thanks for watching!
I had one couldn’t get it apart lol so cut the cord threw it in shred great tear down video
LOL, you could have made a Dollar More if you bashed it with a BHF Thanks for watching.
😂😂😂😂😂
Lol she was pampered
Slice and dice 😂 watch out, dont pull back a nub
170 bucks will get you a propane crucible that doubles as a forge if turned on it's side from Ebay. Melt some of those down and scrape out the slag and see if you can get a better purity ingot out of it. Purchase a unscented box of Borax from target for flux to help adhere to the slag. You'll need to fashion a scraping tool for the slag. I used an old metal ladle spoon that I connected to a long piece of metal from a crappy jack that comes with most vehicles. Line a muffin pan with tin foil and there's your ingot molds to pour into. Aluminum foil keeps it from sticking to the pan.
Yes, I have been thinking of getting a furnace. But so far I have warded off the idea. Someday I'm sure. My stator wrecker is on the front burner right now.
That was a good breakdown! Not a lot in them but nice little motors.. i cant seem to keep people watching either. Just about had it with trying! Good video Dennis!
Thanks 👍 Shoot me an email... I'll give you a few tips that may help you.
He said “ if this don’t work I got a hammer “ . 😂😂😂 . Who buys low grade boards? Do you send them off or does your yard take them ?
My yard buys them, in my last video, when to do the price is right game at the end... it shows l got .20 cents a pound. Check it out. Thanks for partaking my friend.
Maby the vice could help hold it for you
I'm not sure... never tried it. Thanks for watching:-)
Touch the capacitor getting to the transformer and you won’t have anymore birthdays.
Yes... you have to respect them :-) Thanks for watching.
Nice trailer you got buddy! Plus you got like litter bucket weight as well buddy them transformers are heavy! Great pay buddy!
Thanks 👍 I still have not finished it, need to put permanent lights on the trailer. Thanks for stopping by.
🎉
Thanks for checking out the video. Hope you'll look around my channel page.
What’s the dollar value!
Copper is a commodity so the price goes up and down. The other day I got $4.44 a pound. I'd say the average over time has been real close to $3.00 a pound. Thanks for watching :-)
Sound like a cool shirt, but in my area it would get you meth charges.
Why? Do the strippers do meth?
@@thescrapmeister for sure. Every meth addict around us tries to steal the copper from our substations.
@@realrural7876 Do they find a lot of them laying there from getting zapped?
@@thescrapmeister most of them only steal the equipment grounds. I hope I never do.
Those square d "I-line" breakers are worth big money selling them to a used breaker buyer or on eBay
Yes, I know :-) I scarified one for the video! Now I just need to get the rest listed. Thanks for watching.
Coppers worth less then 4$ per pound in that quality lol
Yes, that is why you will see a lot of scrappers saving it up until they have enough and the price is right. Thanks for watching.
360 minus finding micro minus getting the coper out minus going and getting 360 😂 Im write with you though I usto scrap back in the day I usto be the guy giving the money at the register and weighing in the materials but I still love watching it... Good luck love your channel
Once it is in your blood... it's a life long sentence with chance of parole! Thanks for watching :-)
How long did it take to get the transformer out of each microwave?
About 7 minutes per unit, thanks for watching.
If you are not an electrical engineer then you don't know what you talking about all you need the copper for is to sell it but you no idea why the build transformers like that, you talk a lot of nonsense good luck with your nonsense
Hey, Thanks for watching... sometimes us youtubers will say stuff or forget stuff in the videos. It's a call to action, to get viewers to comment. I'm no electrical engineer, but I was an electrician for many years :-)
62 and prices are very low here in MO
Thanks for watching, I hear Kentucky has very low prices also.
First of all where the hell are you going to get 18 microwaves. And then only eight of them had the windings. That's ridiculous that would take forever to get that many to make $360 first of all you have to drive around looking for them what a crock. Yeah I can see if you drove around and got several of them along with a whole bunch of other scrap that's different but you're definitely not going to make $360 an hour on nothing but microwaves if you had a couple hundred of them in your garage if you even have space for that then you got to get rid of all the micro extra microwaves . Try and get all the plastic out of them and everything so you can scrap the rest of it for iron. But you're probably going to spend more money in gas hauling them damn things
Hey, Thanks for watching :-) I'm lucky, I get them from my Hotel Fairy Godmother! I think you may have missed the point of the video. It is a hypothetical, based on being able to liberate the copper in one minute or less. The shell of the units is sold as shred metal, no additional processing needed.
15
Thanks for watching Scrapperette! Do you do any scrapping ?
Invest in a calculator
Yes, I shouldn't do Math on the fly and while trying to shoot a video! But then again, it drives comments :-)