The DIY guys
The DIY guys
  • 5
  • 411 873
Screen with Carplay & Android Auto installation for Mini One R56 2007 | The DIY Guys
This is the link to the screen we used s.click.aliexpress.com/e/_AeAojG
In this video we'll show you how to install an aftermarket screen with Carplay & Android Auto into your Mini One R56. Be sure to always order a screen that fits your car.
Thanks for watching!
- The DIY Guys -
มุมมอง: 56 177

วีดีโอ

Carplay Walkthrough / Review on the Peugeot 308 II | The DIY Guys
มุมมอง 19K3 ปีที่แล้ว
Hi everyone, a lot of you guys wondered how the Carplay kit works, how the AC controls and buttons work with the kit, etc. So we decided to make a walkthrough / review video. We hope this helps a lot of you guys out! Link to the kit we used: s.click.aliexpress.com/e/_AZqzLF If you haven’t seen our video on how to install a Carplay unit, you can watch it here: th-cam.com/video/dNOIFLdVH6Q/w-d-xo...
Changing Halogen to LED Lights for Peugeot 308 II | The DIY Guys
มุมมอง 42K3 ปีที่แล้ว
Hey guys, here is our newest video on how to change your halogen lamps to LED for the Peugeot 308 II. We'll be changing the high and low beam light, the reverse lights and license plate lights. These are the LED's we've used: High Beam ( choose HB3): s.click.aliexpress.com/e/_A5TpCM Low Beam (choose H7): s.click.aliexpress.com/e/_A5TpCM Reverse Lights: s.click.aliexpress.com/e/_AcNs4u License P...
Backup Camera Installation for Peugeot 308 II | The DIY Guys
มุมมอง 65K3 ปีที่แล้ว
Hey guys, here is our newest video on how to install a backup camera in a peugeot 308 II. If you haven’t seen our latest video on how to install a Carplay unit, you can watch it here: th-cam.com/video/dNOIFLdVH6Q/w-d-xo.html Below are all the parts we used in this video and that are needed for the installation. The Backup Camera: s.click.aliexpress.com/e/_9I0HTW Power cable for the camera: s.cl...
Carplay & Android Auto installation for Peugeot 308 II | The DIY Guys
มุมมอง 230K4 ปีที่แล้ว
Link to the kit we used: s.click.aliexpress.com/e/_AZqzLF Here is a video on how to install an aftermarket Carplay / Android Auto unit into your Peugeot 308 II. This works with other cars as well but the installation will be a bit different. Always make sure to order a Carplay unit that fits your car. In the next video we will install the backup camera in our Peugeot 308 II that is linked to th...

ความคิดเห็น

  • @SmileyFro
    @SmileyFro 20 วันที่ผ่านมา

    Is there any way to increase the brightness of the fuel gauge light? Or the icons when they are turned on i.e. cruise control or CEL?

  • @damlacetin9281
    @damlacetin9281 หลายเดือนก่อน

    Front dashcam on the accu would be nice

  • @sabinolaveglia
    @sabinolaveglia 2 หลายเดือนก่อน

    Ciao, c'è bisogno di codificare di nuovo l'autoradio dopo il montaggio del nuovo?

  • @arturw5776
    @arturw5776 2 หลายเดือนก่อน

    Hey nice video Can you add a new link for a camera without CarPlay?

  • @foxyy2438
    @foxyy2438 2 หลายเดือนก่อน

    Can you still use the aircon ?

  • @forkless
    @forkless 2 หลายเดือนก่อน

    In case you haven't by now, adding a cone shaped step drill is a nice to have in your toolkit.

  • @and_rew9768
    @and_rew9768 3 หลายเดือนก่อน

    Well done 💪👍👋

  • @95Attentat
    @95Attentat 5 หลายเดือนก่อน

    How many RAM it has?

  • @nocapwithcaps3625
    @nocapwithcaps3625 5 หลายเดือนก่อน

    How do you adjust audio?

    • @OlivierLopezCh
      @OlivierLopezCh 2 หลายเดือนก่อน

      Did you figure this out?

  • @LousOnYT
    @LousOnYT 5 หลายเดือนก่อน

    Does anyone knows where to connect the "Reversing Line Detection" so when I set the gear to reverse the back camera shows automatically?

  • @drdjingle
    @drdjingle 6 หลายเดือนก่อน

    Can you make a tutorial for changing the fog lights for this model . Especially the left one (if you are standing in front of the car)

  • @RadenMan
    @RadenMan 7 หลายเดือนก่อน

    Great video! Would this work on Peugeot 308 sw 2016?

  • @v8sarecutejdw384
    @v8sarecutejdw384 8 หลายเดือนก่อน

    Just curious if you had to use a canbus ?

  • @sergioalemansuarez666
    @sergioalemansuarez666 10 หลายเดือนก่อน

    Hola! Que hiciste con el hueco del cd? Que se me queda sin nada

  • @ΚΩΣΤΑΣΜΠΑΣΙΟΥΚΑΣ-η7ψ
    @ΚΩΣΤΑΣΜΠΑΣΙΟΥΚΑΣ-η7ψ ปีที่แล้ว

    Hello after installing led lamps what about rubber part?The lamp fits properly inside?

  • @mardakuru34
    @mardakuru34 ปีที่แล้ว

    What was name is high and low beam H?

  • @kledizollani3793
    @kledizollani3793 ปีที่แล้ว

    Does any one know if i can change the green light?

  • @russobelo
    @russobelo ปีที่แล้ว

    can you please tell what that second camera reference is? thank you

  • @PneumaticFrog
    @PneumaticFrog ปีที่แล้ว

    What's the exact one you bought, the 8gb one?

  • @mascherininiccolo9345
    @mascherininiccolo9345 ปีที่แล้ว

    Hi nice tutorial, i want to mount this on my r56 too but I read a lot of comments about losing audio and chimes. Do you have the same problems or you fixed the wiring in another way modifying the ones included in the unit, do you know if this unit supports retro cam?

    • @dayronhidalgo3259
      @dayronhidalgo3259 9 หลายเดือนก่อน

      Man i do right now and i lost my audio idk what i hace to do

  • @andersnonved1366
    @andersnonved1366 ปีที่แล้ว

    Hi, and thank you for your video. One question. Will my reverse camera still work after installing this module? I've heard about some issues about this not working properly 🤔

  • @nothing-ig8pn
    @nothing-ig8pn ปีที่แล้ว

    It suitable for Peugeot 3008 2015 RT6 system

  • @jacobwiebenga3959
    @jacobwiebenga3959 ปีที่แล้ว

    I also installed a rear camera on my Peugeot 308 SW II from 2016. It was a lot of work to get it working so I like to share my findings with you: I used an Ebilaen AA/CarPlay unit and a Smartour 1080p camera. I found out as explained in this video that I had to use a relais to make it work since the voltage was varying between 12V-14V (so even above the 12V use a relais). They don't explain it in this video but it does matter to which yellow cable of the two cables of the relais you connect the - and signal/reverse light. Check Google for an image of how to connect the cables to the relais. Next, I also found out that I had to use the small red cable attached to the video cable. So don't cut it off! I had to connect it to the REVERSE input cable on the back of the Ebilaen module. This provides the module the signal that the car is in reverse. At first I connected this cable to the reverse light cable but as said earlier the voltage was varying too much. Therefore I connected the tiny red REVERSE cable to the + cable of the relais which also goes to the camera. And then it worked! Turn off OEM|Aftermarket camera in the main menu under settings > car. Finally, the guide lines on the screen were opposite to that my steering wheel was doing. Go to Front View in the main menu and change View to Normal of Reverse. Hopes this works for you. Cheers!

    • @thierryhimself2796
      @thierryhimself2796 6 หลายเดือนก่อน

      Thanks man, I spent a good share of the day struggeling with this install and I think that as you mentionned, the key is the relay! I'll give it another shot soon... By the way, where did you get the steady/power 12V?

    • @octavian4305
      @octavian4305 2 หลายเดือนก่อน

      @@thierryhimself2796 I managed to wire it up and used the antena amplifier cable in the headunit and wired it to the little red wire that came along with the RCA video cable. Since the Car has a Canbus, the camera pops up without needing the reverse camera signal. If you don't have a canbus you can just wire the cable from the antena amplifier back to the camera.

    • @thierryhimself2796
      @thierryhimself2796 2 หลายเดือนก่อน

      ​@@octavian4305 thanks, helpful!

  • @russobelo
    @russobelo ปีที่แล้ว

    what is the link for the 2nd camera used?

  • @adilsonjose4863
    @adilsonjose4863 ปีที่แล้ว

    Tem como instalar câmera de vídeo marcha atrás no radio origem 308

  • @adilsonjose4863
    @adilsonjose4863 ปีที่แล้ว

    Tem como instalar câmera de vídeo?

  • @dmadden2666
    @dmadden2666 ปีที่แล้ว

    is it possible to get the top speedo above the screen to show mph?

    • @aviatorian5348
      @aviatorian5348 ปีที่แล้ว

      That’s what I’m wondering I’ve been researching for days now!

  • @yektaeymen8233
    @yektaeymen8233 ปีที่แล้ว

    Bro wtf is that glovebox compartment lol I just saw it, does 2009 R56 has that too?

    • @dalitelli1935
      @dalitelli1935 ปีที่แล้ว

      My friend, I bought a mini cooper modél 2009 moteur vti, my question to you is it a good car or not. Please reply

  • @brianlittlefield2814
    @brianlittlefield2814 ปีที่แล้ว

    Hey there, I can't figure out the sound wiring. The main plug from the old radio has all the speaker lines coming to the new unit, but this one came with a bunch of AV female plugs. How did you wire it up for sound using stock speakers?

    • @jamescarney4711
      @jamescarney4711 4 หลายเดือนก่อน

      Didnyou ever get an answer to this? If not what did you do?

  • @jkmiddy2224
    @jkmiddy2224 ปีที่แล้ว

    Just install one of these no audio at all

    • @brianlittlefield2814
      @brianlittlefield2814 ปีที่แล้ว

      No sound here, can't figure it out

    • @v8sarecutejdw384
      @v8sarecutejdw384 8 หลายเดือนก่อน

      Did you guys figure it out ? I have only the back speakers to work

  • @ibrai.884
    @ibrai.884 ปีที่แล้ว

    How can you change the green lights on the speedometer to other colors?

  • @REDDANANAS
    @REDDANANAS ปีที่แล้ว

    The kit in the link says wired Android auto but in the video it seems like nothing is wired, is Android auto compatible with Wireless aswell?

  • @gittemobius4256
    @gittemobius4256 ปีที่แล้ว

    Witch CarPlay System have YOU bought ?

  • @플러스카
    @플러스카 ปีที่แล้ว

    The board will burn if I plug in the Linbus 6-pin cable, so how should I plug it in?

  • @gorandekic4509
    @gorandekic4509 ปีที่แล้ว

    What about the air con...can you show a video that it still works>>? It will sell you heaps of this units !!

  • @8165311
    @8165311 ปีที่แล้ว

    Does this unit also have apple car play or do i need to order something else? Ty on your response.

  • @srenfurboje574
    @srenfurboje574 ปีที่แล้ว

    Thank you for showing it! Is it possible to get it to work wirelessly? I allways have to plug in lightning cable. I have tried a carlinkit adapter but it wont work. Do you know of an adapter that would make the Unit wireless?

  • @srenfurboje574
    @srenfurboje574 ปีที่แล้ว

    Is it possible to get it to work wirelessly? I allways have to plug in lightning cable. I have tried a carlinkit adapter but it wont work. Do you know of an adapter that would make the Unit wireless?

  • @Omerobbie101
    @Omerobbie101 ปีที่แล้ว

    Hi @ DIY Guys! Nice job! Maybe can we get in contact?

  • @victoramor3181
    @victoramor3181 ปีที่แล้ว

    Hello, im going to buy the same car the gt from 2015, if you install this, can you still use the rest of the funtions the screen car has? From there you control aircon, hands free etc. When I go backwards will the sensors still pop up on the screen? Thanks in advanced!!

    • @kbarokut2010
      @kbarokut2010 ปีที่แล้ว

      Yes. All the buttons on the steering wheel also work as before.

  • @donbraz8738
    @donbraz8738 ปีที่แล้ว

    hi there, just follow your steps. after installation yhe instrument cluster lights dont work the digits are there and runs normal but light are off

  • @andersonangel08
    @andersonangel08 ปีที่แล้ว

    What tools do you need to do this?

  • @kishos.k2873
    @kishos.k2873 ปีที่แล้ว

    Where can I get a place holder ? Took my cd unit out and just a big gap and can see wires

  • @ryanhall1025
    @ryanhall1025 ปีที่แล้ว

    Anyone know if this will change my mph digital read out on rev screen or will this still work okay

  • @Cristianput
    @Cristianput ปีที่แล้ว

    Can this be used on a 208 2017 Peugeot?

  • @RSarge
    @RSarge ปีที่แล้ว

    do you have a firmware upgrade file for this unit? I have the same unit and after install it just flashes the logo. When I put it in Reverse in shows the view of the back up camera but still flashes on and off. please help

  • @samrees2k9
    @samrees2k9 ปีที่แล้ว

    Where did you get those metal plate things?

  • @steveallinson6100
    @steveallinson6100 ปีที่แล้ว

    Hi, do you need to remove the cd player to install this on the 308? As ideally I want to keep the cd player

  • @uketj
    @uketj ปีที่แล้ว

    Where do I find the unit for 2009

  • @felixcalais6040
    @felixcalais6040 ปีที่แล้ว

    I’ve seen a lot of videos of people doing this on the right side, how can it be correct? Doesn’t the camera need to be centered?