วีดีโอ

Is this possible to do without the original key? like, would i have access to the cylinder and then re-pin the cylinder to a new key, WITHOUT having the original key to turn and unlock the cylindar?

I did it but a red x appears after the user code :(

Thanks for this and the deadbolt video. Made it super easy to do.... did drop the top pins once, that was a pain to fix, but awesome video!

No

I’ll be ready to retire by the time he gets to the actual reset procedure.

Am I the only person who pronounces it “Shlog”?

The new smart locks so much easier 3 second job

There is absolutely no way this video could get any better. Clear, precise with an explanation of each step. Brilliant.

I did the first deadbolt fine, the second I'm unable to turn the key. Is there a way to remove the cylinder?

What is you need to make a different key..

The follow tool doesn’t work… absolutely hate Schlage

This dude just saved my butt! Thank you 👏🏾👏🏾🙌🏾🙌🏾

Can they be rekeyed if you don’t have a key?

Would the lock still work without the Retaining pin?

Everything fell out 😭

What isn't shown are the springs and tops pins the follower keeps in place that line up over each pin chamber in the plug. If the follower is pulled out these parts will escape and will need to be replaced one at a time with tweezers. Do not let the follower come out without the plug to take it's place or you will be unhappy

Off to Home Depot I go to attempt to rekey our 2 deadbolts. This video was great and gave me the confidence to do it myself.

Suddenly, my keypad is not working yet my Apple HomeKit Bluetooth connection works fine. I put new batteries in it, but the keypad is still not working. Now it does a single beep. When I try to do a factory reset, by removing the batteries and then reconnecting while holding down the Schlage button,it continues with the single beep and double green checkmark blink. This video says it’s supposed to blink three times but this is not the case.

Great job thanks

Where do you get a new key to rekey your locks to?

Great informative presentation. You spoke in very easy to understand instructions. Thank you

hi so I have used this video to attempt to rekey locks about 6 times. 2 of those times I followed this video and jammed the cylinder. The other 4 I did not listen to the video at all key step and it made all the difference. The problem arises when I am sliding the cylinder back on to the housing. If you slide it above those mini half holes and then try to turn the key, the pins get stuck in the half hole and you’ve completely jammed your cylinder. Instead, I slid the cylinder on the other side, without the mini holes, then just manually turned them back to the proper full holes. Has anyone else run into this issue? Am I doing something wrong or is this video incorrect?

This procedure was very helpful. Here's a few tips that might make it even easier to complete: 1) The "factory preset codes" are the 4-digit user codes, not the longer programming code. 2) When it comes time for you to enter the 4 digit user code (after you've reset the lock), press the outside Schlage button and RELEASE it. Wait for the screen to light up, then press in one of the two four-digit user codes, making sure that you see a green check mark after you press in each number.

Thank you so much for a fantastic video! You are a gifted instructor.

Where do i buy the keying kit?

Life saver video. This helped me out so much!

Thank you, you just answered all my questions.

anyway to do this with out the original key? I have 4 dead bolts on one of my buildings that I lost the keys too but i have another main Schlage key id like to rekey them too so all my locks will be one key. i love schlage and just figure i need to buy new ones.

Excellent video, thanks.

Is it possible to rekey a double key deadbolt?

All the pins fell out thanks to my following the instructions on the back out the rekey kit. How do I replace them?

I have tried to find 4 sets of Schlage locks door & deadbolt all keyed the same as I lost my keys. I have one Schlage lock set on a door I recently replaced. So for the other 3 I’m going to get sets or individuals & rekey them. This looks like the cats meow.

A quick question I couldn’t find an answer to on the Schlage website. I am hoping to rekey a Schlage encode, smart deadbolt and a Schlage B 60N deadbolt to use this same key. Is the five pin cylinder on the Encode deadbolt the same or similar to the five pin cylinder used in the B60N deadbolt? Would they use the same pins if I bought a rekey kit online to rekey these cylinders? A vendor on eBay is telling me they use different pins, but he doesn’t sound that sure of himself. Many thanks for your help. Q2: Can a 6-pin key be used with a 5-pin lock?

Excellent tutorial! thank you for making this video all I need now is the schlage rekey kit thanks again

Really nice clean and clear videos.Thank you for sharing

Great demonstration on how to perform this task with such clear tutorial. Very appreciated!

10 minutes of commercials. I figured it out myself before the commercials were fininshed.

Wonderfully useful explanation. Thank you!

What a mission

Liver?

How do you remove the core without having the key to rotate the cylinder?

I’m only getting two green checks

Thank you! Very easy to understand

Phenomenal instruction and clear demonstration. You just gave me the confidence to re-key three of my deadbolts. Many thanks, and best regards.

This is the second home in which th-cam.com/users/postUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU we've replaced our "regular" doorbell with a Ring video doorbell and we really enjoy it. It is very easy to install and it works very well, with a clear picture through the app and good in-home use (we added the chime, which is also easy to install and doesn't require another thought to use).

Exellent instructions

Thank you!

What kind of lubricant if any would you recommend for a deadbolt ?

Well done.

Can you change the code to open the lock?