วีดีโอ

Parang entry level lang to sir for gaming @ 100hz refresh rate. Hindi nya ma max out c ps5 na 120fps kaya. Mag 144hz monitor ka na meron nman affordable brand.

Yes sir according sa specs it supports AMD Freesync hindi ko lang na try kc integrated graphics lang gamit ko.

Yes sir according sa specs it supports AMD Freesync hindi ko lang na try kc integrated graphics lang gamit ko.

@@aqmgameshobbies8165 Thanks boss!

Hindi sir. Ma tilt lang xa

Sad i dont have the temp before. But i can get the temp now by stress test using msi kombustor.

@@aqmgameshobbies8165 all good! current temps is fine :)

Response Time 1ms

Good day sir. Max is 4GB 2400 MHZ DDR4 RAM. peru pwede naman xa kung meron ka 2666 mhz, e downgrade lang nya ang speed.

@@aqmgameshobbies8165 sige boss, thankyou, have a great day ahead:)

Nice to hear it from you sir. Babolat does not make that model anymore. It has a roddick signature in it.

How much?

Whatt?😄

180 grit only sir

@aqmgameshobbies8165 thanks! And how long did you wait to put the cover back on the stereo after painting? Did you wait a few days so it could completely dry?

Sa ngayon ok pa naman po

Sorry for that sir but its only used for office works now. Ill update next time when they plan to use it in Auto CAD program

Just here in our place. local pc store

@@aqmgameshobbies8165 do you have link for your store? I would like to also buy anchor plastic buckles

LED Switch is for those PC Case that has its own Fan RGB Control Hub or Controller. There is also a LED button in the Case.

Sir tingnan mo c hdmi port ng motherboard, minsan kc naiipit ng I/O shield ang hdmi port ng motherboard. Try lang.

Thanks

Yes it sounds the same as the stock tweeter.

Its a brand new cpu/cooler. Just the stock thermal paste sir

How to be like you trader

🤕😶

From i wanna be a trader to vlogger

* Acer A314-32-C83Q

4GB DDR4 RAM lang po sir. Meron na kz xa stock na 4GB. Not sure if nka solder sa board. Total 8GB if you add d 4GB. Ayon sa specs nya, maximum 8GB RAM only.

28 po lahat sir

Is it the RGB SW or Rgb Switch? Is it located in the front panel ?

@@aqmgameshobbies8165 it's for the fans light I can light to single color

@@aqmgameshobbies8165 it's RGB sw

Yes. If you have the right thickness go for it. I used a good brand pads so its quiet expensive for me thats why I combined pads.

Yes it can be moved up or down

Thanks buddy

Yes sir. Install it at the M2P_CPU slot because your WD NVMe is already a PCIe Gen 4.0 and in the 2280 form factor.

No sir. Just the RAM. Thanks

Yes you can sir. Me i go 1/2 size higher for this model.

In the specs, its 2. 1 PCIe 4.0 x4 & 1 PCIe 3.0 x4 M.2 NVMe.

Yes sir its the PL -A350B model and I already purchased online 2 sizes of belt but its not the right size😔

@@aqmgameshobbies8165 I got this turntable used and restored the automatic stop mechanism. It came with a 5mm x 28.5mm**¿? and works fine. Just purchased this size online as a spare. As soon as I install it, let you know if works. ✌

@@aqmgameshobbies8165 5 x 28.5 mm This is the measure that works for me. My previous band is a little looser (maybe 29mm) and had variations in pitch. With this one it remains stable all the time.

Update sir: I tried the 5mm x 272mm belt and its almost similar to the stock. It works but its thick compared to the stock which is thinner.

@@aqmgameshobbies8165 Thank you! Stock one is about 4mm?

Naka solder sir sa motherboard hindi xa pd e upgrade. Wala rin nabibili na laptop cpu

Its just for me, 7. Good for low wattage speaker.

May be next time sir. I do not have Ti version. Thanks for watching

🙏 thank you sir. When will you have your setup?

Thanks for your input sir. Theres an indicator "UP" label in the plastic cover. Also I think airflow is going up not down since the evaporator and louver in your car is at the top of the blower. And when in recirculation mode, the air goes back and sucked in the blower.

👍 welcome sir

pasagot naman po ASAP

nababasa naman po ng bios setting yung ssd pero nalabas 'no bootable device' kapag binubuksan na

Sir sa bios settings na detect c ssd? Tingnan po sa boot order ng mb sa bios kung sinu priority. Since ngpalit kau ng ssd, ang windows folder ay nawala na. Walang na detect c laptop na os files sa new ssd mo. Insert mo lang ng bootable usb den reinstall o.s.

Now lang po nabasa sir

Actually sir di ko xa ginamit sa game, pang porma lang😆. Kc tennis lang nilalaro ko

Welcome sir

Welcome

No worries.

4GB DDR4 Ram lang po para total nya 8GB kasi meron nang 4GB na stock sa laptop

Thanks for sharing. This is another problem from asrock again. Updating/reinstalling the software doesn't work.

@@aqmgameshobbies8165 i solve this problem by simply taking off and put it back again to the connector, and it works again, weird hahaha

4GB lang additional sir kc may 4GB na stock. Total 8GB Ram

Nakalabas yan sir sa poste. Hirap kc hatiin maliit na mohon. Thanks

Mali nga yan, dapat hati po, my butas yan sa gitna na maliit,doon dapat nakatapat bardwire mo kaibigan

Sa nakikita kung mga gawa mong concrete post parang madalang or tinipid mo yta, kasi sa katagalan ng maraming taon yan luluwag or lalawlaw ang barb wire kasi madalang ang poste, yung lang po ang comment ko

Your welcome sir. Thanks for viewing

dati nung wala pa ko software na yan working yung techware forge M + Tecware Orbis F1 ko sa RGB w/ remote pa na control kulay + fan speed now ayaw na umilaw umiikot nalang siya. PLEASE HELP 😢

Sir c Orbis F1 fans ba ay 3-pin 5v Argb connector? Kc ung asrock b450 steel legend ko ay meron lang 12v 4-pin rgb led.